Bulk Weighing Automation
A weighing system is not one machine. It is a feeder holding a rate, a hopper weigher totalising what passed, a packer closing out the bag and a dust collector keeping the material in the process - all reporting to the same control room. We supply that chain as one engineered set.
Request A QuoteFrom Requirement to Commissioned Equipment
Map the line
We work through the material path stage by stage and identify where the rate is set, where the total is taken and where material is being lost.
Specify the measurement points
Rate control goes to the feeder, cumulative metering to the hopper weigher, final weight to the packing machine.
Choose the metering mode
Calibratable where the figure must be verifiable, non-calibratable where it is for internal process control.
Select the control tier
Remote Control, Local Economic or Local Touchscreen per station, matched to how the line is actually operated.
Define the host interface
Digital interfaces and command sets are configured so every station accepts host commands and streams real-time measurement data.
Protect the accuracy
Dust capture at charging points, external bearings and dust-resistant housings keep the weighing elements clean, which is what stops long-term drift.
Commission and hand over
Equipment is checked against specification and the technical team supports installation and start-up.
Machines Supplied Through This Route
High-Precision Feeder
A screw feeder, a hopper weighing unit and a control unit working as one loop. The controller reads material weight and screw speed in real time,…
View Specifications
Automatic Discontinuous Totalizing Hopper Weigher
A batch totalising scale for in-plant metering. Material fills a weighing hopper, the weight is recorded, the hopper discharges and the controller…
View SpecificationsFully Automatic Bottom-Fill Packaging Machine Without Hopper
A complete bagging line in one frame: it loads the bag, fills it from the bottom through a valve, weighs it, sews the mouth and conveys the finished…
View Specifications
Dust Collector
A fan pulls dust-laden air away from the charging point, cartridge filters intercept the particles, clean air is exhausted and the collected dust…
View SpecificationsOther Ways We Work
FAQ About Bulk Weighing Automation
Can you supply only part of the chain?
Yes. Each machine is supplied on its own and integrates through the same digital interface approach.
Will the equipment talk to our existing PLC or SCADA?
The control units include digital communication interfaces and a defined command set for receiving host commands and transmitting real-time measurement data.
What causes weighing accuracy to drift over time?
Dust accumulation in the weighing structure and bearings sitting in the product path are the two common causes. Both are addressed by design here - dust-resistant housings, external bearings and capture at the charging point.
Start a Bulk Weighing Automation Project
Send the requirement and we will come back with the engineering approach, the scope and the price.