SJ732 Diesel Snow Blower 110cm Working Width 6.8kW Beiante Engine
The SJ732 is a diesel powered walk behind snow clearing machine for municipal depots, contractors and industrial sites that already run diesel across their fleet and do not want a separate gasoline supply for one seasonal machine. A Beiante 186FE OHV four stroke diesel engine of 420cc, rated 6.8kW at 3600rpm, drives a 110cm working head with a 50cm brush through a gear transmission, covering up to 5000 square metres an hour. Both manual and electric start are fitted, there are 3 forward and 3 reverse speeds, and the working head angles 25 degrees left or right. The machine carries CE marking for Europe and loads 58 units to a 40HQ container at 130kg gross each.
- Diesel engine so the machine runs on the same fuel already stocked for the rest of a depot fleet
- 110cm working width in one pass, which halves the run count on a long footpath route
- Up to 5000 square metres an hour, enough for a fixed commercial route in a morning
- Manual and electric start so a cold morning does not depend on a recoil pull
- 3 forward and 3 reverse speeds for backing out of bays and dead ends
- Working head angles 25 degrees either way to keep snow off ground already cleared
- 58 units per 40HQ container keeps freight cost per machine low for a full season order
- CE marked for Europe, which removes the compliance step for EU importers
Product Gallery
Specifications
| Model No | SJ732 |
|---|---|
| Engine Brand | Diesel Beiante 186FE, OHV, 4 stroke |
| Power | 6.8Kw / 3600rpm |
| Displacement | 420cc |
| Start Model | Manual start & electric start |
| Fuel Capacity | 6.5L |
| Oil Capacity | 1.1L |
| Fuel Consumption | 1.8L/H |
| Area Sweep (Max) | 5000 m²/H |
| Transmission Mode | Gear |
| Working Width | 110cm / 43.3” |
| Brush Diameter | 50cm / 19.7″ |
| Forward / Reverse Speeds | 3 / 3 reverse |
| Wheels | 5.00-10 |
| Universal Wheel | 6″ wheels |
| Working Head Adjustable Angle | Left 25 degrees, right 25 degrees |
| Easy Fast Assembly | Yes |
| Packing | Wooden box, 1PC/2Cartons |
| Certification for Europe | CE Standard |
| Gross / Net Weight | 130 / 120kg |
| Carton Size | 125*115*92cm |
| Warranty | One year |
| Loading 20′ / 40′ / 40HQ | 24 / 50 / 58pcs |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Municipal depots that fuel their whole fleet from a single diesel tank
- Industrial and logistics sites where gasoline storage is restricted but diesel is already on site
- Contractors running fixed seasonal routes across several commercial properties
- Facility teams keeping car parks, loading bays and fire exits open through a snow event
- Equipment rental fleets standardising on diesel across their hire equipment
Who It Is For
- Importers and distributors stocking diesel powered snow equipment
- Municipal and highway maintenance departments
- Industrial, port and logistics facility teams
- Property and facility management contractors
- Equipment hire and rental companies
Problems It Solves
- Keeping a separate gasoline supply for one seasonal machine adds a fuel store, a handling procedure and a risk assessment
- Sites with restricted gasoline storage cannot take a petrol machine at all
- Narrow clearing widths force repeat passes and blow out the labour budget on a fixed route
- Recoil only machines are slow to start in low temperatures and frustrate seasonal staff
- A fixed working head throws snow back onto ground already cleared and doubles the work
- Uncertified machines leave the EU importer carrying the CE compliance burden
Technical Features
- Beiante 186FE OHV four stroke diesel engine of 420cc rated 6.8kW at 3600rpm
- Manual start and electric start fitted as standard
- Gear transmission with 3 forward and 3 reverse speeds
- 110cm working width with a 50cm brush
- Maximum area sweep rate of 5000 square metres per hour
- Working head adjustable 25 degrees left and 25 degrees right
- 5.00-10 drive wheels with 6 inch universal wheels
- Fuel consumption of 1.8L per hour from a 6.5L tank with 1.1L oil capacity
Certifications
- CE Standard for Europe
Quality Control
- Incoming inspection on diesel engines, gearboxes and steel before they reach the line
- In process checks during welding and assembly of the working head
- 100% finished machine inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and decal set
- Manual and packaging artwork in the destination market language
- Wooden box or bulk packing to suit the sales channel
How It Compares
Against Gasoline version of the same 110cm machine
The gasoline model runs a Loncin 420cc engine at 9.0kW against 6.8kW here. The diesel is the choice when fuel standardisation on site matters more than peak output.
Against Narrower walk behind snow machine
At 110cm working width and up to 5000 square metres an hour, this machine halves the pass count against a sub 60cm unit.
Against Ride on snow machine
A ride on unit covers open ground faster but cannot enter narrow footpaths, entrances and bays. This walk behind machine goes where the route actually is.
Against Electric snow machine
A cable or battery limits run time and reach. A 6.5L diesel tank at 1.8L per hour keeps the machine working through a long route.
Use Guide
- Fill with clean diesel and check the oil level before the first start of the season
- Allow the diesel engine to reach operating temperature before working it hard in low ambient temperature
- Set the working head angle away from traffic, parked vehicles and building glazing before engaging the head
- Start in a low forward gear on deep or compacted snow and increase speed only once the head clears freely
- Stop the engine before clearing a blockage and use a clearing tool, never a hand
- Drain water from the fuel system and grease the working head shaft before end of season storage
732 Best snow blower with diesel engine Buyer Questions
What is the minimum order quantity?
One 20ft container, which holds 24 units of this model. Single sample orders are also accepted if you want to test the machine before committing to a container.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Is the machine CE certified for the European market?
Yes. This model is produced to CE standard for Europe.
How many units fit in a container?
24 units in a 20ft, 50 units in a 40ft and 58 units in a 40HQ, packed in a wooden box at 125*115*92cm.
What engine is fitted?
A Beiante 186FE OHV four stroke diesel engine of 420cc, rated 6.8kW at 3600rpm, with manual and electric start.
What warranty and spare parts support do you provide?
One year warranty. Parts needed because of a quality problem are supplied free of charge, and parts outside the warranty period are sold at cost price.
Can the machine be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme, manual and packaging artwork.
Other Models in Snow Sweepers
Wheels snow shovel
View Specifications →
Multi-function snow plough
View Specifications →
Riding snow blower
View Specifications →
ATV Snowplow
View Specifications →733 Best snow blower 2024
View Specifications →
732 Gasoline snow shovel
View Specifications →
15HP Gasoline spreader
View Specifications →
15HP Gasoline snowplow
View Specifications →Request a Quotation for the 732 Best snow blower with diesel engine
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.