Moulded Rubber Ice Grips for Outdoor Footwear
Stretch-over traction cleats in moulded rubber with yellow studs across the tread. They sit in this catalogue because they come off the same moulding process as a souvenir magnet, and they show what that process does when the brief is functional rather than decorative.
- RangeHot Products
- ThemeOutdoor
- MaterialMoulded rubber
- MOQ5,000 pcs per design
- Production10 to 15 days at MOQ
Quotation within 8 working hours. Existing samples dispatch in 1 to 2 days.
Product Overview
Unlike a decorative piece, this part is designed around stretch and grip: the frame has to pull over a boot sole and return, and the studs have to stand up to load without tearing out of the base.
Outdoor, workwear and safety brands, and promotional buyers in cold-climate markets. It is produced in the same soft moulding process as the rest of the hot products range, in Yiwu, Zhejiang, China.
Key Benefits
- Colour moulded through the body, so the artwork on this design cannot rub off with handling
- Pantone matched, so a reorder in eighteen months sits next to the original without a visible shift
- Tooling retained here between orders, so a repeat run skips development entirely
- Trial quantities accepted below the 5,000 pcs MOQ so you can prove sell-through first
Application Scenarios
- First trial orders with a new supplier
- Filling a gap in an existing seasonal range
- Functional moulded rubber accessories for outdoor brands
- Short-deadline promotional campaigns
Problems It Solves
Buyers arriving without a fixed brief waste weeks browsing a full catalogue. A short, proven list is a faster way into a first order, and it also shows where the factory is developing.
- A faster starting point. Four proven designs beat ninety unsorted ones when you are shortlisting a supplier for a first trial order.
- Evidence of development. New items are developed every year. The ice grips show the same soft-moulding capability applied to a functional outdoor product.
- Cross-range examples. Magnet, opener, set and functional part in one place shows what the tooling can do before you commit to a category.
Specifications
| Model code | TBC |
|---|---|
| Product type | Hot Products |
| Material | Moulded rubber |
| Construction | Colour moulded through the body, not printed |
| Colour matching | Pantone Matching System |
| Fixing | Specified per design at drawing stage |
| Size and weight | Quoted per design |
| MOQ | 5,000 pcs per design, lower accepted for trial orders |
| Sample lead time | 1 to 2 days existing, 4 to 6 days custom |
| Production lead time | 10 to 15 days at MOQ |
| Packing | Bulk bagged, polybagged or blister carded with your header card |
| Compliance | CE, RoHS, SGS and REACH references; lead, cadmium and nickel free |
Dimensions and weight are set per design at drawing stage and confirmed on the quotation, so they are shown as quoted rather than guessed here.
How It Is Made
Artwork becomes a mould drawing, the drawing becomes an aluminium tool, colour is laid into the cavities one colour at a time, and heat cures the whole part into a single soft body. The fixing, a magnet recess, a ring eyelet or a strap anchor, is designed into the body rather than added afterwards.
Finished parts are checked against the approved reference sample held here, not against a photograph or a colour description.
Customisation Options
| Change | What it involves |
|---|---|
| Colour change | Production setup change on the existing mould. The cheapest option available. |
| Lettering or place name | Cut into the mould, so a new wording needs a new tool. Artwork carries over. |
| Logo added | Placed on a clear field in the design and shown at actual size on the drawing before tooling. |
| Size change | New tool. Tell us the target size at drawing stage so detail can be checked against it. |
| Packing | Bulk bags, polybags or blister cards printed here with your artwork and barcode. |
Compared With Printed Alternatives
| This moulded product | Printed magnet | |
|---|---|---|
| Colour durability | Moulded through the body, cannot wear off | Printed surface, wears at the edges |
| Detail | Relief and texture cut into the tool | Flat, no physical depth |
| Setup cost | Mould required per design | Lower setup, higher unit cost at volume |
| Best for | Repeat ranges and reorders | Very short one-off runs |
Use Guide
Wipe clean with a damp cloth. The surface is closed, so it does not absorb dirt the way a porous material would. Keep out of prolonged direct sunlight in shop windows where possible.
Some stainless steel and aluminium clad appliance doors are not magnetic at all. In markets where those are common, a line on the packaging saves customer complaints.
Questions About This Product
Do you make functional rubber parts as well as gifts?
Yes. The same soft moulding process makes functional parts. Send your brief with the load, stretch and temperature requirements and we will tell you plainly whether this process suits it.
Can this design be produced in our own colours?
Yes. A colour change on an existing mould such as this design is a production setup change rather than new tooling, which makes it the cheapest customisation available. Supply Pantone references rather than colour names.
Can our logo or a place name be added?
Lettering and logos are cut into the mould, so a new wording means a new tool. The artwork and construction carry over, which makes the drawing work faster than starting from nothing.
What is the minimum order for this design?
5,000 pcs per design, with lower quantities accepted for trial orders. Production runs 10 to 15 days at MOQ once the sample is approved.
Soft PVC Versus Rubber and Silicone
Three materials cover almost everything in moulded promotional products. Choosing the wrong one usually shows up as a part that looks right and feels wrong.
Seasonal and Holiday Retail
Seasonal buying is a calendar problem before it is a product problem. The range is decided months before the shelf date and there is no second chance if it slips.
Corporate Gifting and Brand Merchandise
A branded gift only works if people keep it, and people keep things that are useful or that look like something rather than like a logo on a blank.
Quote Moulded Rubber Ice Grips for Outdoor Footwear
Send the quantity per design, any colour or lettering changes and your delivery date. A costed answer comes back within 8 working hours.