Chile Llama Desert Fridge Magnet RC-TS38
A llama between two cacti on a brown desert ground, framed square. The palette is drawn from the Atacama rather than from the coast, which distinguishes it from the rest of the Chilean set.
- RangeTourist Souvenirs
- ThemeChile
- MaterialSoft PVC, moulded
- MOQ5,000 pcs per design
- Production10 to 15 days at MOQ
Quotation within 8 working hours. Existing samples dispatch in 1 to 2 days.
Product Overview
Warm neutral grounds are harder to get right than bright ones, because small pigment differences show up immediately. This one is locked to a single Pantone reference for that reason.
Northern Chile and Atacama tourism retail, plus general Chilean ranges needing a desert design. It is produced in the same soft moulding process as the rest of the tourist souvenirs range, in Yiwu, Zhejiang, China.
Key Benefits
- Colour moulded through the body, so the artwork on RC-TS38 cannot rub off with handling
- Pantone matched, so a reorder in eighteen months sits next to the original without a visible shift
- Tooling retained here between orders, so a repeat run skips development entirely
- Trial quantities accepted below the 5,000 pcs MOQ so you can prove sell-through first
Application Scenarios
- Gift shop racks at heritage sites and old-town centres
- Airport and ferry-terminal last-minute purchase displays
- Hotel and resort lobby retail corners
- Tour operator welcome packs and city-pass bundles
Problems It Solves
Souvenir buyers rarely fail on price. They fail on artwork that flattens a landmark into a blob, on colours that drift between production runs, and on reorders that arrive six weeks after the season started.
- Landmarks that survive moulding. Skylines, minarets and bridges lose their read when relief depth is set wrong. We proof the relief on the mould drawing before steel is cut.
- Colour that matches last season. Every colour is fixed to a Pantone reference, so a reorder sits next to the original on the same shop rack without looking faded.
- Range depth without range cost. Destinations need eight to twenty designs, not one. Sharing a tooling batch across a range keeps the per-design cost down.
Specifications
| Model code | RC-TS38 |
|---|---|
| Product type | Tourist Souvenirs |
| Material | Soft PVC, moulded |
| Construction | Colour moulded through the body, not printed |
| Colour matching | Pantone Matching System |
| Fixing | Magnet set into a recess in the moulded back |
| Size and weight | Quoted per design |
| MOQ | 5,000 pcs per design, lower accepted for trial orders |
| Sample lead time | 1 to 2 days existing, 4 to 6 days custom |
| Production lead time | 10 to 15 days at MOQ |
| Packing | Bulk bagged, polybagged or blister carded with your header card |
| Compliance | CE, RoHS, SGS and REACH references; lead, cadmium and nickel free |
Dimensions and weight are set per design at drawing stage and confirmed on the quotation, so they are shown as quoted rather than guessed here.
How It Is Made
Artwork becomes a mould drawing, the drawing becomes an aluminium tool, colour is laid into the cavities one colour at a time, and heat cures the whole part into a single soft body. The fixing, a magnet recess, a ring eyelet or a strap anchor, is designed into the body rather than added afterwards.
Finished parts are checked against the approved reference sample held here, not against a photograph or a colour description.
Customisation Options
| Change | What it involves |
|---|---|
| Colour change | Production setup change on the existing mould. The cheapest option available. |
| Lettering or place name | Cut into the mould, so a new wording needs a new tool. Artwork carries over. |
| Logo added | Placed on a clear field in the design and shown at actual size on the drawing before tooling. |
| Size change | New tool. Tell us the target size at drawing stage so detail can be checked against it. |
| Packing | Bulk bags, polybags or blister cards printed here with your artwork and barcode. |
Compared With Printed Alternatives
| This moulded product | Printed magnet | |
|---|---|---|
| Colour durability | Moulded through the body, cannot wear off | Printed surface, wears at the edges |
| Detail | Relief and texture cut into the tool | Flat, no physical depth |
| Setup cost | Mould required per design | Lower setup, higher unit cost at volume |
| Best for | Repeat ranges and reorders | Very short one-off runs |
Use Guide
Wipe clean with a damp cloth. The surface is closed, so it does not absorb dirt the way a porous material would. Keep out of prolonged direct sunlight in shop windows where possible.
Some stainless steel and aluminium clad appliance doors are not magnetic at all. In markets where those are common, a line on the packaging saves customer complaints.
Questions About This Product
Do muted colours vary more between runs than bright ones?
They are less forgiving, yes. Any drift is more visible in a neutral than in a saturated colour, which is why we hold neutrals to a Pantone reference and keep a signed sample on file.
Can this design be produced in our own colours?
Yes. A colour change on an existing mould such as RC-TS38 is a production setup change rather than new tooling, which makes it the cheapest customisation available. Supply Pantone references rather than colour names.
Can our logo or a place name be added?
Lettering and logos are cut into the mould, so a new wording means a new tool. The artwork and construction carry over, which makes the drawing work faster than starting from nothing.
What is the minimum order for this design?
5,000 pcs per design, with lower quantities accepted for trial orders. Production runs 10 to 15 days at MOQ once the sample is approved.
More From the Tourist Souvenirs Range
Chile Destination Souvenir Range
Build one national range that lets a wholesaler supply shops from the desert to Patagonia without shipping designs to places where they will not sell.
How Custom Soft PVC Fridge Magnets Are Made
A soft PVC magnet is not printed. It is moulded, colour by colour, in an aluminium tool, and almost every quality problem you can see in a finished magnet was decided before production started.
CE RoHS REACH and SGS for Imported Gift Products
Four acronyms come up in almost every European and North American enquiry. They are not interchangeable, and knowing which applies to your market saves a delayed shipment.
Tourist Attractions and Gift Shops
Attraction retail has one shelf, a fixed season and a visitor who decides in under thirty seconds.
Quote Chile Llama Desert Fridge Magnet RC-TS38
Send the quantity per design, any colour or lettering changes and your delivery date. A costed answer comes back within 8 working hours.