308 Safety Hasp
308 Safety Hasp secures a door, cabinet, box or trunk with a padlock or a keyed body. All screws are concealed when the hasp is closed, so the fixing cannot be removed while the lock is in place. This model is listed in 7 sizes, from 1.5″ to 6″. Stock finishes are zinc plated, brass plated, galvanized and black.
Available Sizes
- 1.5″
- 1.75″
- 2″
- 2.5″
- 3.25″
- 4.5″
- 6″
What This Model Gives You
- Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc.
- For security, all screws are concealed when hasp is closed
- Ribbed design for extra strength
- Includes rigid non-swivel staple
- Manufactured from hot rolled steel
- All screws are concealed when the hasp is closed
- Ribbed design adds stiffness without extra thickness
How It Is Built
- Concealed screws when closed
- Ribbed design for extra strength
- Swivel or rigid staple depending on version
- Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc.
- For security, all screws are concealed when hasp is closed
- Includes rigid non-swivel staple
- Manufactured from hot rolled steel
Application Scenarios
- Site and tool chests
- Storage cabinets and lockers
- Shed and outbuilding doors
- Trunks and cases
Who It Is For
- Security and site hardware distributors
- Tool box and site chest makers
- Storage and self-storage operators
- Agricultural building suppliers
Problems It Solves
- A hasp whose screws are exposed can simply be unscrewed
- Thin hasps twist open before the padlock ever fails
308 Safety Hasp Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 308 |
|---|---|
| Product Type | Safety Hasp |
| Sizes | 1.5″ · 1.75″ · 2″ · 2.5″ · 3.25″ · 4.5″ · 6″ |
| Number of Sizes | 7 |
| Material | Hot rolled or cold rolled steel |
| Finish | zinc plated, brass plated, galvanized and black |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Hot rolled or cold rolled steel
Manufacturing Process
- Blanking
- Punching
- Press forming
- Ribbing
- Riveting of the hinge
- Plating or coating
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Padlock eyes and staples
A hasp spreads the fixing over a plate and hides the screws; a simple staple leaves both the screws and the joint exposed.
Use Guide
- Fit the hasp so the staple sits centrally in the slot with the door closed.
- Use a padlock shackle that fills the staple; a thin shackle leaves room for a lever.
Further Reading
Barrel Bolts Safety Hasps and Latches Explained
Three families of door hardware that are often specified interchangeably and should not be. What each one actually secures, and...
Choosing a Gate Latch for Out-Swing Gates and Animal Pens
An automatic latch closes itself. That single difference is why it belongs on a livestock gate and a manual drop latch does...
Questions About the 308 Safety Hasp
What is the difference between a swivel and a rigid staple?
A swivel staple lets the hasp be latched without a padlock. A rigid staple always needs the padlock to hold it.
Which version suits an around-the-corner fitting?
The double hinge version is designed for around-the-corner applications on lockers, chests and tool boxes.
Which sizes of the 308 Safety Hasp are available?
This model is listed in 7 sizes: 1.5″, 1.75″, 2″, 2.5″, 3.25″, 4.5″, 6″. Sizes between the listed steps are run to order.
Can I get a sample of the 308 Safety Hasp before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 308 Safety Hasp
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.