117 Shelf and Rod Bracket
117 Shelf and Rod Bracket carries a closet shelf and the clothes rod on the same fixing, so a wardrobe run needs one line of brackets instead of two. The brackets are punched for number 12 wood screws and are designed to mount to the stud. This model is listed in one size, 240 x 300 mm. Stock finishes are white.
Available Sizes
- 240 x 300 mm
What This Model Gives You
- This shelf support and clothes rod hanger is designed for shelves 12 inches or larger
- Rod bracket can hold rods up to 1-3/8 diameter
- Brackets are embossed for extra strength
- Brackets are punched for #12 wood screws
- Mount to stud for optimal load capacity
- Manufactured from steel
- One bracket carries both the shelf and the hanging rod
How It Is Built
- Rod cradle sized for rods up to 1-3/8 inch on the rod bracket sizes
- Punched for number 12 wood screws
- Mount to stud for optimal load capacity
- This shelf support and clothes rod hanger is designed for shelves 12 inches or larger
- Rod bracket can hold rods up to 1-3/8 diameter
- Brackets are embossed for extra strength
- Brackets are punched for #12 wood screws
- Manufactured from steel
Application Scenarios
- Bedroom wardrobe fit-out
- Hotel room closets
- Utility and coat storage
Who It Is For
- Closet and wardrobe system suppliers
- Housebuilders fitting out bedrooms
- Hotel and student accommodation refit contractors
Problems It Solves
- Separate shelf and rod supports double the fixing points and the install time
- Rod supports pull out of plasterboard when the wardrobe is fully loaded
117 Shelf and Rod Bracket Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 117 |
|---|---|
| Product Type | Shelf And Rod Bracket |
| Sizes | 240 x 300 mm |
| Number of Sizes | 1 |
| Material Thickness | 300.0 mm |
| Material | Cold rolled steel strip |
| Finish | white |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Cold rolled steel strip
Manufacturing Process
- Blanking
- Punching
- Press forming
- Embossing
- Surface finishing
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Separate rod sockets and shelf brackets
A combined bracket halves the number of fixing points and keeps the rod parallel to the shelf without measuring twice.
Use Guide
- Set the brackets on the stud centres and check the rod cradles are level along the run before loading.
- Designed for shelves 12 inches or wider on the rod bracket sizes.
Others in This Family
Further Reading
How to Choose a Shelf Bracket Size and Thickness
Bracket sizes are quoted as wall leg x shelf leg x material thickness. This guide explains how to read that notation, how to...
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Questions About the 117 Shelf and Rod Bracket
What rod diameter does the cradle take?
Up to 1-3/8 inch on the rod bracket sizes in this family.
Do the brackets come apart for shipping?
The 115 design disassembles for easier installation and flatter packing. The 116 and 117 designs ship assembled.
Can I get a sample of the 117 Shelf and Rod Bracket before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 117 Shelf and Rod Bracket
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.