106 Heavy Duty Shelf Bracket
106 Heavy Duty Shelf Bracket is a braced shelf bracket with a folded edge and a thick section, built for garage, shed and workshop shelving where the load is tools, paint and hardware rather than books. This model is listed in 4 sizes, from 150 x 250 x 30 x 4 mm to 330 x 500 x 30 x 4 mm. Stock finishes are White, black, grey and zinc plated.
Available Sizes
- 150 x 250 x 30 x 4 mm
- 200 x 300 x 30 x 4 mm
- 250 x 400 x 30 x 4 mm
- 330 x 500 x 30 x 4 mm
What This Model Gives You
- Ideal for storing heavy objects in a garage, shed, workshop, or basement
- Mount to stud for optimal load capacity
- Punched for wood mounting screws
- Manufactured from steel
- Thick section and folded edge resist bending under a concentrated load
- Punched for wood mounting screws so it fixes straight to a stud
- Available plated or powder coated for damp unheated spaces
How It Is Built
- Heavier gauge than the utility bracket lines
- Stay or gusset bracing between the legs
- Punched for wood mounting screws
- Ideal for storing heavy objects in a garage, shed, workshop, or basement
- Mount to stud for optimal load capacity
- Manufactured from steel
Application Scenarios
- Garage and shed shelving
- Workshop tool storage
- Basement and stockroom shelving
Who It Is For
- Workshop and garage storage suppliers
- Industrial and MRO distributors
- Builders merchants supplying shed and outbuilding fit-outs
Problems It Solves
- Light gauge brackets deflect visibly once a garage shelf is loaded
- Shelving in unheated buildings rusts where the coating is thin
106 Heavy Duty Shelf Bracket Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 106 |
|---|---|
| Product Type | Heavy Duty Shelf Bracket |
| Sizes | 150 x 250 x 30 x 4 mm · 200 x 300 x 30 x 4 mm · 250 x 400 x 30 x 4 mm · 330 x 500 x 30 x 4 mm |
| Number of Sizes | 4 |
| Material Thickness | 4.0 mm |
| Material | Cold rolled steel strip |
| Finish | White, black, grey and zinc plated |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Cold rolled steel strip
Manufacturing Process
- Blanking
- Punching
- Press forming
- Welding or riveting of the stay
- Surface finishing
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Utility shelf brackets
The braced form carries a heavier point load at the front of the shelf, which is where a garage shelf usually fails.
Use Guide
- Mount into a stud, not into plasterboard plugs, when the shelf will carry tools or paint.
- Keep bracket spacing at or below 600 mm for heavy storage.
Others in This Family
Further Reading
How to Choose a Shelf Bracket Size and Thickness
Bracket sizes are quoted as wall leg x shelf leg x material thickness. This guide explains how to read that notation, how to...
Inside Our Inspection Flow From Incoming Steel to Delivery
Seven checkpoints between the steel arriving and the carton leaving, and the one rule that decides whether a lot is repaired or...
Questions About the 106 Heavy Duty Shelf Bracket
How far apart should these brackets be fitted?
For heavy storage keep the unsupported span at or below 600 mm. Closer spacing is cheaper than a thicker board.
Can you supply a zinc plated version?
Yes, zinc plated is a standard finish on this line alongside white, black and grey.
Which sizes of the 106 Heavy Duty Shelf Bracket are available?
This model is listed in 4 sizes: 150 x 250 x 30 x 4 mm, 200 x 300 x 30 x 4 mm, 250 x 400 x 30 x 4 mm, 330 x 500 x 30 x 4 mm. Sizes between the listed steps are run to order.
Can I get a sample of the 106 Heavy Duty Shelf Bracket before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 106 Heavy Duty Shelf Bracket
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.