104 L Profile Bracket
104 L Profile Bracket is a long-leg zinc plated bracket supplied in nine single-dimension lengths from 120 mm to 680 mm. It suits deep shelving and worktop supports where a short stamped bracket does not reach far enough under the board. This model is listed in 9 sizes, from 120 mm to 680 mm. Stock finishes are zinc plated.
Available Sizes
- 120 mm
- 175 mm
- 240 mm
- 280 mm
- 330 mm
- 380 mm
- 480 mm
- 580 mm
- 680 mm
What This Model Gives You
- Nine lengths cover shallow shelves through to worktop depth
- Zinc plated finish for indoor and sheltered outdoor use
- One profile across the whole length range keeps a retail range visually consistent
How It Is Built
- Zinc plated after forming
- Single-leg dimension stated per size
Application Scenarios
- Deep retail display shelving
- Workbench and worktop supports
- Warehouse picking shelves
Who It Is For
- Shopfitters supporting deep display shelving
- Worktop and counter installers
- Storage system suppliers needing long bracket arms
Problems It Solves
- Deep shelves sag when the bracket arm stops short of the front edge
- Mixing bracket profiles across depths makes an installed run look untidy
104 L Profile Bracket Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 104 |
|---|---|
| Product Type | L Profile Bracket |
| Sizes | 120 mm · 175 mm · 240 mm · 280 mm · 330 mm · 380 mm · 480 mm · 580 mm · 680 mm |
| Number of Sizes | 9 |
| Material | Cold rolled steel strip; Zinc plating |
| Finish | zinc plated |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Cold rolled steel strip
- Zinc plating
Manufacturing Process
- Blanking
- Punching
- Press forming
- Zinc plating
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Folded triangular brackets
The L profile keeps the area under the shelf clear, so drawers and boxes can sit right back against the wall.
Use Guide
- Choose the length closest to the shelf depth and mount it so the arm ends within 15 mm of the front edge.
- For runs longer than one metre, space brackets so no unsupported span exceeds 600 mm.
Others in This Family
Further Reading
How to Choose a Shelf Bracket Size and Thickness
Bracket sizes are quoted as wall leg x shelf leg x material thickness. This guide explains how to read that notation, how to...
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Questions About the 104 L Profile Bracket
What does the single dimension refer to?
It is the length of the supporting arm. The wall leg is proportioned to the arm on this profile.
Is zinc plating suitable outdoors?
It is suitable for sheltered outdoor use. For permanent exposure, ask for hot dipped galvanized, which we run on the heavier bracket and corner brace lines.
Which sizes of the 104 L Profile Bracket are available?
This model is listed in 9 sizes: 120 mm, 175 mm, 240 mm, 280 mm, 330 mm, 380 mm, 480 mm, 580 mm, 680 mm. Sizes between the listed steps are run to order.
Can I get a sample of the 104 L Profile Bracket before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 104 L Profile Bracket
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.