Industrial and Protective Coatings
Protective coatings are bought on service life. The raw material decisions behind them are about crosslink density, film flexibility and how the system behaves once VOC limits tighten.
What Goes Wrong in This Industry
Common Pain Points
- Heavy duty anticorrosion systems that crack when the substrate moves
- VOC regulations forcing a move to high solids or solvent free formulations
- Machinery finishes that chalk or fade in outdoor service
What We Supply Against Them
- Solvent free HDI biuret and isocyanurate grades support high solids and low VOC two component systems
- Polyetheramine hardeners add impact resistance and flexibility to epoxy anticorrosion primers
- Bisphenol A and phenolic modified epoxy resins give the chemical resistance the primer layer has to carry
Materials We Supply Into Industrial and Protective Coatings
The HB series for flexible high build light resistant polyurethane coatings
View Specifications
Biuret and isocyanurate grades for light stable 2K polyurethane coatings
View Specifications
Low viscosity amine hardeners that toughen epoxy without blushing
View Specifications
Bisphenol A bisphenol F o-cresol and phenolic modified grades in one table
View Specifications
Fast curing aromatic hardeners for 2K polyurethane coatings and adhesives
View SpecificationsHow an Order Runs
Specification
You send the performance target or the incumbent grade. We confirm what matches within 24 hours.
Sample
Free samples for laboratory testing and formulation validation, about 7 days, with shipping at your cost.
Quotation
Priced against current market conditions. Terms are 30% deposit in advance, 70% against a copy of the bill of lading.
Production And Inspection
Quality control across incoming materials, production and finished product inspection, with a batch certificate of analysis.
Packing And Documentation
Export packaging, specialised hazard packing for dangerous goods, and validated cold storage shippers where the material requires it.
Shipment
Sea, land or air routing coordinated through our Hong Kong entity. 20-30 days after the deposit is received.
Related Process Guides
A 2K polyurethane coating is a negotiation between pot life, dry speed, hardness and weathering. This is how we work through it with a formulator.
See The Process
Epoxy work is resin plus hardener plus cure schedule. Changing any one of the three changes the other two, so we specify them together.
See The Process
Cast elastomers, rollers and TPU all come down to three components: the isocyanate, the polyol soft segment and the chain extender.
See The ProcessGuides For This Industry
Both are aliphatic HDI derivatives and both give light stable coatings. Their crosslink density, viscosity and flexibility are not the same.
Read The GuideEEW, colour, viscosity and softening point are the four numbers that decide whether a resin grade fits your process.
Read The Guide
Latency is the whole point. This guide explains what melting point and activation temperature tell you about shelf life and cure schedule.
Read The GuideIndustrial and Protective Coatings Questions
Which products do you supply into industrial and protective coatings?
The products listed on this page: HDI Biuret-Based Polyisocyanates, HDI Trimer Polyisocyanate Curing Agents, Polyetheramine Curing Agent, Epoxy Resins, TDI Trimer Polyisocyanate Curing Agents. Each one carries its full grade table on its own page.
Can you match a grade we already use?
Send the datasheet or the key figures — NCO content, equivalent weight, viscosity, solids — and we will say which of our grades matches and which do not. We will also say when nothing matches.
What volumes do you supply?
All international orders carry a minimum order quantity. Standard packing formats in this range are 200 kg steel drums and 1,000 kg IBC, with bulk supply available on request for regular volumes.
How long does a first order take?
Samples about 7 days. Mass production 20-30 days after the deposit is received, once your final approval is given.
Do you provide technical support during qualification?
Yes. We give product selection advice and formulation support based on your application requirements, processing conditions and performance targets.
Talk to Someone Who Knows the Industrial and Protective Coatings Requirement
Technical response within 24 hours. Tell us the property you need to hit and the volume you run.