Textile and Apparel
Printed Fabric Contour Cutting With Vision CCD
Manual cutting or die cutting cannot follow the irregular edges of a printed pattern without significant setup time for each new design.
Application Cases
Jobs These Machines Are Bought To Do
Eight application cases built from the machines, materials and samples on this site. Each one names the process problem first and the machine second.
Advertising and Signage
Acrylic Signage Engraving and Cutting
Signage shops often struggle with the trade-off between bed size and precision.
Sheet Metal Fabrication
Carbon Steel Bracket Cutting On A 3015 Bed
Brackets in this thickness range were being cut on plasma and then ground by hand before welding.
Mould and Die Repair
Injection Mould Edge Repair Without Removing the Mould
Conventional TIG welding introduces high heat input that distorts thin mould sections and creates large heat-affected zones requiring...
Metal Surface Cleaning and Restoration
Rust Removal On Steel Parts Before Coating
Traditional cleaning methods like sandblasting or chemical stripping create dust, sludge, or substrate damage.
Hardware and Electronics Marking
Colour Marking On Stainless Steel Hardware
Standard fiber lasers often struggle to produce vibrant, consistent colors on stainless steel without burning the surface or requiring...
Advertising and Signage
Marble and Granite Photo Engraving
Engraving large slabs on standard machines requires flipping the stone or using heavy lifting gear to reach the back, which risks breakage.
Advertising and Signage
Vinyl Graphics Contour Cutting For Print Shops
Manual cutting of vinyl graphics is slow and inconsistent, leading to wasted material on complex contours.
Buyer Questions
Questions About These Cases
Are these cases from named customers?
No. Buyers in this trade rarely allow their name on a supplier site, so each case describes the job, the machine and the process rather than a company name.
Can you run a test cut on my material?
Send a sample or the material specification and we will run a test on the same model you are quoting and send the video and photos back.
Which case is closest to sheet metal work?
Carbon Steel Bracket Cutting On A 3015 Bed covers mixed-thickness plate work from 3 mm to 14 mm on a fiber cutter.
Do you support installation after delivery?
Yes. English manuals and video guidance ship with the machine, and support runs by email, phone, video and remote connection with on-site service when needed.
Send Us Your Part And We Will Tell You What It Takes
A drawing, a photo or a sample is enough to size the machine, the power and the options for the job you are quoting.