Fiber Laser Cutting Machines
3015 E 3000w Fiber Laser Cutting Machine
The WH-3015E is a single-platform fiber laser cutter with a 1500 x 3000 mm rated sheet size and a laser source selectable at 1500 W, 2000 W or 3000...
Industry
Laser Machines For Sheet Metal Fabrication
Sheet metal shops need to cut mixed orders of plate and tube without moving parts between separate machines. Weihua Laser supplies fiber cutters with 0.01 mm repeat positioning accuracy and enclosed designs that let you process 1500 W to 3000 W jobs on...
Overview
What This Industry Needs From A Laser Supplier
Sheet metal shops need to cut mixed orders of plate and tube without moving parts between separate machines. Weihua Laser supplies fiber cutters with 0.01 mm repeat positioning accuracy and enclosed designs that let you process 1500 W to 3000 W jobs on annealed beds. These machines handle carbon steel, stainless and tube frames while keeping your shop inside local safety rules.
Pain Points
Where The Process Hurts Today
- Punch tooling cost and lead time block short-run orders where the hole pattern changes every time
- Sheet parts and tube parts are cut on separate machines, so material is handled twice
- A cutter whose bed was never stress relieved drifts out of accuracy and starts producing scrap
- Open cutting zones expose operators to laser radiation and require expensive external safety fencing
- Manual focus adjustment between materials and thicknesses slows down changeover and increases setup error
Requirements
What Buyers In This Sector Need
- One machine that covers plate and tube cutting with a single setup to reduce handling
- Repeat positioning accuracy of 0.01 mm so hole patterns stay interchangeable between parts
- Fast changeover between materials and thicknesses using an auto-focus laser head
- Enclosed cutting with safety interlocks so the shop stays inside local workplace rules
- A supplier that answers technical questions within 24 hours when the machine is down
Applications
Typical Application Scenarios
- Cutting electrical cabinet panels where every louvre and hole must repeat across the batch
- Cutting square and round tube for fitness equipment, shelving and furniture frames
- Processing mixed batches of 1 to 10 mm carbon steel and stainless steel plates
- Running high-volume signage jobs where bed stability prevents drift during long cuts
- Replacing a punch press for short-run parts where tooling cost is not justified
Recommended Machines
All machines
Fiber Laser Cutting Machines
HT Series Enclosure Metal Sheet Tube Fiber Laser Cutter
The HT Series is a fully enclosed fiber laser cutter designed to process both metal sheet and pipe on a single machine.
Fiber Laser Cutting Machines
ET Series Metal Sheet Tube Fiber Laser Cutter
The ET series is a fiber laser cutter for metal sheet and tube in one machine, offered as WH-3015ET, WH-4020ET and WH-6020ET.
Fiber Laser Cutting Machines
T Series Metal Tube & Pipe Fiber Laser Cutter
The WH-6020T and WH-6035T are fiber laser cutters for metal tubes and pipes. They process diameters from φ20 mm to φ230 mm or φ350 mm with a maximum...
Fiber Laser Cutting Machines
Full Enclosure Fiber Laser Cutter With Exchange Table
The H Series Full Enclosure Fiber Laser Cutter With Exchange Table is offered as WH-3015H, WH-4020H, WH-6020H and WH-6025H, with rated sheet sizes of...
Fiber Laser Cutting Machines
3015A Fiber Laser Cutter With Exchange Table
The WH-3015A is a fiber laser cutter with an open exchange table and a 1500 x 3000 mm rated sheet size.
Metal and Nonmetal CO2 Laser Cutters
1390 Tube Laser Cutting Machine
The WH-1390M is a dual-head CO2 laser cutter with a 1300 x 900 mm work area and a 300 W sealed tube for cutting metal and nonmetal sheets.
How We Work
From Enquiry To A Running Machine
Send drawings in DXF or AI and the material and thickness mix you run
We recommend the bed size and source power that match that mix, not the largest machine
Machine is assembled, run idle and checked for positioning and repeat positioning accuracy
A secondary configuration check and a component count are done before packaging
Machine ships by sea, air or international express with an English manual and video guidance
Installation and commissioning are supported by video and remote technical support
Delivery
Delivery And After Sales
- Two-year warranty on the whole machine, free repair and return postage for accessory faults
- Free lifetime technical support once the warranty period ends
- Spare parts supply and on-site service when a problem cannot be solved remotely
- Response to any pre-sales or after-sales question within 24 hours
Buyer Questions
Sheet Metal Fabrication FAQ
Which machine suits a shop cutting mostly 1 to 6 mm steel?
A 1500 W or 2000 W 3015 platform covers that range comfortably. The 3000 W source only earns its cost if you regularly cut above 8 mm.
Can I cut tube on the same machine as sheet?
Yes, the HT series takes both. It features an exchange platform for sheet cutting and handles pipes from 20 mm to 350 mm diameter.
How accurate is the cutting for hole patterns?
The E series has 0.01 mm repeat positioning accuracy. The HT series has 0.02 mm repeat positioning accuracy.
What bed sizes are available?
Rated sheet sizes include 3000 x 1500 mm, 4000 x 2000 mm, and 6000 x 2000 mm depending on the model.
What certification do the machines carry?
We hold CE certificates for laser cutting machines and for laser marking machines, and can send copies before shipment.
How long does shipping take?
It depends on destination and method. We ship by sea, air and international express and confirm the schedule when the order is placed.
Cases From This Industry
Scope A Machine For Sheet Metal Fabrication
Tell us the material, the thickness and the shift pattern you run. We size the machine to that, not to a catalogue page.