Fiber Laser Cutting Machines
3015 E 3000w Fiber Laser Cutting Machine
The WH-3015E is a single-platform fiber laser cutter with a 1500 x 3000 mm rated sheet size and a laser source selectable at 1500 W, 2000 W or 3000...
Solution
Metal Sheet and Tube Cutting
Fabrication shops often split work between a plate cutter and a separate tube line, doubling handling time. Weihua Laser supplies fiber platforms for 1 to 14 mm plate and dedicated tube chucks for round and square profiles, letting you cut both on the same...
Scope
What This Solution Covers
Fabrication shops often split work between a plate cutter and a separate tube line, doubling handling time. Weihua Laser supplies fiber platforms for 1 to 14 mm plate and dedicated tube chucks for round and square profiles, letting you cut both on the same floor with consistent accuracy.
Before
Problems In The Current Process
- Plate and tube parts are cut on separate machines, forcing material to be moved twice between stations
- Long pipes sag during cutting, causing out-of-round holes and scrapped parts that cannot be reworked
- Punch tooling lead times block short-run orders where the hole pattern changes for every batch
- A cutter bed that was never stress relieved drifts out of accuracy and produces inconsistent parts
- Manual focus adjustment between different material thicknesses slows down changeover and increases operator error
Requirements
What The Process Has To Deliver
- A single machine that covers the plate thicknesses actually in stock, typically 1 to 14 mm
- Repeat positioning accuracy tight enough that hole patterns stay interchangeable between parts
- Fast changeover between materials and thicknesses without manual focus adjustment
- Enclosed cutting with fume extraction so the shop stays inside local workplace rules
- A supplier that answers technical questions within a day when the machine is down
Process
Stage By Stage
Send drawings in DXF or AI and the material and thickness mix you run
We recommend the bed size and source power that match that mix, not the largest machine
Machine is assembled, run idle and checked for positioning and repeat positioning accuracy
A secondary configuration check and a component count are done before packaging
Machine ships by sea, air or international express with an English manual and video guidance
Installation and commissioning are supported by video and remote technical support
Applications
Typical Applications
- Cutting 3000 W fiber laser plates for electrical cabinets where every louvre and hole must repeat across the batch
- Processing 20 to 350 mm diameter pipes for fitness equipment, shelving and furniture frames
- Cutting square and rectangular tube for agricultural machinery frames using a pneumatic chuck system
- Welding stainless sheet corners with a handheld fiber welder instead of TIG and grinding
- Cleaning rust and mill scale off steel weldments before powder coating
Machines Used In This Solution
All machines
Fiber Laser Cutting Machines
T Series Metal Tube & Pipe Fiber Laser Cutter
The WH-6020T and WH-6035T are fiber laser cutters for metal tubes and pipes. They process diameters from φ20 mm to φ230 mm or φ350 mm with a maximum...
Fiber Laser Cutting Machines
HT Series Enclosure Metal Sheet Tube Fiber Laser Cutter
The HT Series is a fully enclosed fiber laser cutter designed to process both metal sheet and pipe on a single machine.
Fiber Laser Cutting Machines
Full Enclosure Fiber Laser Cutter With Exchange Table
The H Series Full Enclosure Fiber Laser Cutter With Exchange Table is offered as WH-3015H, WH-4020H, WH-6020H and WH-6025H, with rated sheet sizes of...
Fiber Laser Cutting Machines
Glass Laser Cutting Machine
The Glass Laser Cutting Machine uses a Wuhan Huaray picosecond laser source at 30w, 50w or 70w to cut glass on a 500 x 400 mm marble work table.
Delivery
Delivery And Support
- Two-year warranty on the whole machine, free repair and return postage for accessory faults
- Free lifetime technical support once the warranty period ends
- Spare parts supply and on-site service when a problem cannot be solved remotely
- Response to any pre-sales or after-sales question within 24 hours
Buyer Questions
Metal Sheet and Tube Cutting FAQ
Which machine suits a shop cutting mostly 1 to 6 mm steel?
A 1500 W or 2000 W 3015 platform covers that range comfortably. The 3000 W source only earns its cost if you regularly cut above 8 mm.
Can I cut tube on the same machine as sheet?
Yes, the HT and ET series take both. If tube is the main job, the T series is a dedicated tube and pipe cutter.
Do I still need to deburr laser cut parts?
Laser edges normally go straight to welding or coating. Thicker carbon steel cut with oxygen may leave light dross that wipes off.
How do I remove weld spatter and rust before coating?
A handheld pulse or continuous fiber laser cleaner removes rust, oil and paint without chemicals or blasting media.
What certification do the machines carry?
We hold CE certificates for laser cutting machines and for laser marking machines, and can send copies before shipment.
How long does shipping take?
It depends on destination and method. We ship by sea, air and international express and confirm the schedule when the order is placed.
Build A Metal Sheet and Tube Cutting Line
Send the part drawing or a photo of the current process. We will come back with the machine, the options and what stays manual.