30W PIR Motion Sensor LED Flood Light
30W PIR Motion Sensor LED Flood Light is the PIR motion sensor flood light we hold for driveways, yards, perimeters and access routes. It draws 30W, with colour temperature Warm white WW 2800-3500K / Neutral white NW 4000-5000K / Pure white CW 5500-7000K, a 100º,50 º degree beam angle and an input of 100-240V AC 50/60Hz. Mounting height changes everything about how a sensor flood light performs.
- LED Power
- 30W
- Color Temperature
- Warm white WW 2800-3500K / Neutral white NW 4000-5000K / Pur
- Beam Angle
- 100º,50 º
- CRI
- >75
What This Model Gives You
100º,50 º degree beam angle
Beam angle is specified as part of the product rather than left as a surprise on site.
Colour rendering >75
Colours under this light read closer to how they look in daylight, which matters wherever product or skin tone is on display.
Power factor ≥0.95
A published power factor is what lets an electrical contractor size the circuit properly.
Colour temperature Warm white WW 2800-3500K / Neutral white NW 4000-5000K / Pure white CW 5500-7000K
The band is published, so the shelf label and the light in the box agree.
Technical Data For 30W PIR Motion Sensor LED Flood Light
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| Input Voltage | 100-240V AC 50/60Hz |
|---|---|
| Power Factor | ≥0.95 |
| LED Power | 30W |
| LED Luminous Flux | 2550-2850lm |
| Average Iilluminance | 2m=155lux / 3M=75lux / 4M=45lux / Facula Area |
| CRI | >75 |
| Beam Angle | 100º,50 º |
| Color Temperature | Warm white WW 2800-3500K / Neutral white NW 4000-5000K / Pure white CW 5500-7000K |
| Operational Condition | Temperature:-30 / °C / ~50 |
| Humidity | 10%-90%RH |
| Min | 5sec Max:6min±2min |
| Height | 2m-4.5m |
| Net Weight | 2.14kg |
| Package | Color box,6pcs/ctn |
How It Is Built
- Electrical input: 100-240V AC 50/60Hz
- Power factor: ≥0.95
- 2.Using high transmittance tempered glass,transimittance93%.
- 3.Complying with ROHS,absolutely not contain mercury or other harmful substance.
- 4.Lifespan of whole tube over 35000 hours.
Buyers This Model Suits
- Facilities managers lighting yards and perimeters
- Residential landlords and property buyers
- Hardware and DIY retail buyers
- Security installers and their distributors
Application Scenarios
- Commercial yards, loading bays and perimeters
- Car parks and access routes
- Outbuildings and storage areas
- Domestic driveways, doorways and side passages
Objections This Model Removes
Lights left burning all night waste energy and annoy neighbours
One sensor light cannot cover both a doorway and a yard
Motion lighting is sold with no output data at all
Security lights are specified by wattage and under-light the area
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Aluminium housing and heat sink production
LED board population and lens assembly
PIR sensor module integration and calibration
Detection range test and output verification
What Gets Checked
- Hold-time behaviour test after last detection
- Housing seal and electrical safety test
- Detection range and angle verification against specification
- Illuminance measurement at the published distances
What You Can Change
- Wattage selected from 10W to 50W
- Colour temperature selected at order stage
- Mounting bracket specification
- Own-brand packaging for retail
Certification
Our LED bulb line holds CE (LVD) and RoHS certificates issued by Shenzhen BST Technology, with the numbers published on our Trust page. Ask us in writing for the certification position on this specific model before you quote it into a regulated market - we will tell you what is held and what is not.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| A separate PIR sensor wired to a flood light | One fitting, one cable and nothing to commission on site |
| A halogen security flood light | A fraction of the energy for comparable coverage, with published lux figures at distance |
| The standard flood light in the same wattage | Runs only when movement is detected, which cuts running hours dramatically |
Getting It Right On Site
Use the published illuminance figures to plan the spacing between units
Size the unit from the area and the mounting height, not from wattage
Aim the sensor so movement crosses the detection zone rather than approaching it
Keep the sensor out of direct view of heat sources and moving foliage
Other Models In PIR Motion Sensor LED Flood Lights
10W PIR Motion Sensor LED Flood Light
20W PIR Motion Sensor LED Flood Light
50W PIR Motion Sensor LED Flood Light
10W Rechargeable Emergency LED Flood Light
10W LED Flood Light
20W Rechargeable Emergency LED Flood Light
Where This Product Fits A Build
Guides That Cover This Product
30W PIR Motion Sensor LED Flood Light Questions
What beam angle is this model?
100º,50 º degrees. Beam angle is a separate part number in this range, so order the angle you need rather than adjusting on site.
What colour temperature does it produce?
Warm white WW 2800-3500K / Neutral white NW 4000-5000K / Pure white CW 5500-7000K. Confirm the exact point you want when you send the enquiry.
How long does it stay on after movement?
It holds on for a set period after the last detection. Confirm the hold time with us for this model before quoting.
Can the sensor be switched off?
If you need permanent light, order the equivalent model from the standard flood light series instead.
How large an area will this cover?
Use the average illuminance figures at distance in the specification table on this page, together with your mounting height.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For 30W PIR Motion Sensor LED Flood Light
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.