10W LED Flood Light
Within the Standard LED Flood Lights line, 10W LED Flood Light is the mains-powered LED flood light specified for facades, yards, compounds and access roads that must stay lit. It draws 10W, with colour temperature Warm white / WW 2800-3500K, a 100º degree beam angle and an input of 100-240V AC 50/60Hz /DC12-24V. Permanent flood lighting is the simplest product in the category and the easiest to get wrong.
- LED Power
- 10W
- Color Temperature
- Warm white / WW 2800-3500K
- Beam Angle
- 100º
- CRI
- >75
What This Model Gives You
Colour temperature Warm white / WW 2800-3500K
The band is published, so the shelf label and the light in the box agree.
100º degree beam angle
Beam angle is specified as part of the product rather than left as a surprise on site.
Colour rendering >75
Colours under this light read closer to how they look in daylight, which matters wherever product or skin tone is on display.
Power factor ≥0.95
A published power factor is what lets an electrical contractor size the circuit properly.
Technical Data For 10W LED Flood Light
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| Input Voltage | 100-240V AC 50/60Hz /DC12-24V |
|---|---|
| Power Factor | ≥0.95 |
| LED Power | 10W |
| LED Luminous Flux | 760-860lm |
| Average Iilluminance | 1m=75lux / 2M=22lux / 3M=12ux / Facula Area |
| CRI | >75 |
| Beam Angle | 100º |
| Color Temperature | Warm white / WW 2800-3500K |
| Neutral White | NW 4000-5000K |
| Pure White | CW 5500-7000K |
| R/g/b/other Optional | Operational condition |
| Temperature | -30 |
| Humidity | 10%-90%RH |
| Net Weight | 0.51kg |
| Package | Color box,30pcs/ctn |
| Mounting Height | Suitable for 8~10mheight |
| Certificate | · |
How It Is Built
- Electrical input: 100-240V AC 50/60Hz /DC12-24V
- Power factor: ≥0.95
- 10W LED Flood Light Parameters Performance.
- 1. Projector / Spotlight/Wall Lighting.
- 2. Pathway Lighting / Park Lighting.
Buyers This Model Suits
- Distributors supplying commercial outdoor lighting
- Industrial, storage and agricultural site operators
- Electrical contractors on fixed outdoor installations
- Facilities and estate managers
Application Scenarios
- Industrial and agricultural buildings
- Building facade and signage lighting
- Yard, compound and storage area lighting
- Loading bays and access roads
Objections This Model Removes
Sensor units get installed where permanent light was required
Mixed wattages from different suppliers look inconsistent on one building
Coverage is only discovered after the flood lights are installed
Halogen flood lighting costs too much to run and fails too often
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Aluminium housing and heat sink production
LED board population and lens assembly
Driver assembly and cable gland fitting
Output and illuminance verification before packing
What Gets Checked
- Illuminance measurement at the published distances
- Output verification against the stated luminous flux
- Housing seal and cable gland integrity test
- Electrical safety and earth continuity test
What You Can Change
- Carton quantity adapted to site delivery
- Wattage selected from 10W to 50W
- Colour temperature selected at order stage
- Mounting bracket and cable specification
Certification
Our LED bulb line holds CE (LVD) and RoHS certificates issued by Shenzhen BST Technology, with the numbers published on our Trust page. Ask us in writing for the certification position on this specific model before you quote it into a regulated market - we will tell you what is held and what is not.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| A halogen flood light of comparable output | A fraction of the energy, far longer service life and published lumen data |
| A high bay fitting | Directional outdoor coverage rather than downward industrial lighting |
| The PIR version of the same wattage | Stays lit continuously, which is what some areas require by policy or by insurance |
Getting It Right On Site
Keep to one wattage family across a facade for a consistent appearance
Confirm the IP rating in writing before quoting into an outdoor tender
Allow for cable gland access when specifying the mounting position
Plan spacing from the published illuminance figures and the mounting height
Other Models In Standard LED Flood Lights
20W LED Flood Light
30W LED Flood Light
50W LED Flood Light
10W Rechargeable Emergency LED Flood Light
10W PIR Motion Sensor LED Flood Light
20W Rechargeable Emergency LED Flood Light
Where This Product Fits A Build
Guides That Cover This Product
10W LED Flood Light Questions
What beam angle is this model?
100º degrees. Beam angle is a separate part number in this range, so order the angle you need rather than adjusting on site.
What colour temperature does it produce?
Warm white / WW 2800-3500K. Confirm the exact point you want when you send the enquiry.
Can it be dimmed?
Dimming is not specified on this family. For dimmable output look at the rechargeable dimmable flood lights.
How far does the light reach?
The specification table on this page gives average illuminance at measured distances. Use those figures with your mounting height.
Is it suitable for permanent outdoor mounting?
It is an outdoor flood light. Confirm the IP rating in writing with us before quoting it into a tender.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For 10W LED Flood Light
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.