180x180mm Square LED Panel Light 550lm
Part number CRPN-003
180x180mm Square LED Panel Light 550lm is the LED ceiling panel we hold for office, retail and public interior ceilings. It is specified at 550 lumens, with a body of 180x180x19mm, an input of AC100-240V, or AC220V, AC110V and SMD 3528 emitters. A shallow panel solves the problem that a full ceiling void creates. It is catalogued as CRPN-003.
- Size
- 180x180x19mm
What This Model Gives You
550 lumens published output
The lumen figure is specified rather than implied, which is what lets a buyer compare like with like.
Body dimensions 180x180x19mm
Physical fit can be checked on paper before the order is placed, not after the goods land.
Against a surface-mounted LED batten
A flush ceiling appearance suited to finished commercial interiors.
Against a grid of downlights
Even coverage without the scalloping and shadow that a downlight grid produces.
Technical Data For 180x180mm Square LED Panel Light 550lm
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| Item No | CRPN-003 |
|---|---|
| Input | AC100-240V, or AC220V, AC110V |
| Size | 180x180x19mm |
| Frame Material | AL6063 aluminium material |
| LED Type | SMD 3528 |
| Lumen | 550LM |
| CRI (color Rendering Index) | 74-78 Ra |
| Heat Dissipation | two sides and back plate |
| Power Consumption | 10w |
How It Is Built
- Light source: SMD 3528
- Electrical input: AC100-240V, or AC220V, AC110V
Buyers This Model Suits
- Healthcare and education facility buyers
- Office fit-out contractors and their suppliers
- Electrical distributors stocking metric grid sizes
- Property managers refurbishing suspended ceilings
Application Scenarios
- Clinic, classroom and corridor lighting
- Ceiling refurbishment where void depth is limited
- Open plan office ceilings on a 600mm grid
- Retail and showroom ceilings needing colour scene control
Objections This Model Removes
Ceiling voids are too shallow for a conventional recessed luminaire
Cut-out dimensions are missing and the ceiling is cut wrong
Mixed panel sources give visibly different light across one ceiling
Panels arrive that do not match the ceiling grid already installed
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Aluminium frame extrusion, cutting and finishing
LED board population and edge or back lighting assembly
Diffuser and light guide plate fitting
Driver pairing, illumination uniformity check and packing
What Gets Checked
- Packaging drop test for panel corners
- Frame dimension check against the published size
- Illumination uniformity inspection across the diffuser
- Driver compatibility and flicker check
What You Can Change
- Colour temperature or tunable white specification
- Recessed, surface or suspended mounting accessories
- Driver specification matched to your market
- Panel size selected from the standard metric grid range
Certification
Our LED bulb line holds CE (LVD) and RoHS certificates issued by Shenzhen BST Technology, with the numbers published on our Trust page. Ask us in writing for the certification position on this specific model before you quote it into a regulated market - we will tell you what is held and what is not.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| A grid of downlights | Even coverage without the scalloping and shadow that a downlight grid produces |
| A recessed modular fluorescent luminaire | A fraction of the depth and considerably lower running cost for comparable coverage |
| A surface-mounted LED batten | A flush ceiling appearance suited to finished commercial interiors |
Getting It Right On Site
Confirm the ceiling grid dimension before ordering, not after
Check the available void depth against the published panel depth
Order all panels for one ceiling together for batch colour consistency
Specify the mounting accessory with the panel if the ceiling is not a grid
Other Models In LED Panel Lights
Round LED Panel Light Series 6W To 22W
RGB LED Panel Light 295x295mm
CCT Adjustable LED Panel Light 295x295mm
Square LED Panel Light Series 6W To 18W
598x598mm LED Panel Light 38W
Super Brightness Square LED Panel Light Series
RGB LED Panel Light 295x595mm
CCT Adjustable LED Panel Light 295x595mm
Guides That Cover This Product
CRI And Why Colour Rendering Decides Retail Lighting
What Ra means, which numbers matter in shops and hotels, and where a low CRI lamp costs you sales.
Design GuideSMD LED Chip Types Explained 2835 3014 3528 5050 And 5630
What the four-digit numbers mean, how they differ in output and heat, and where each belongs.
Component GuideChoosing LED Panel Sizes For Suspended Ceiling Grids
Metric grids, cut-out dimensions and void depth - the three numbers that decide a panel order.
Design Guide180x180mm Square LED Panel Light 550lm Questions
What are the physical dimensions?
180x180x19mm. Check that against the fitting or the ceiling opening before you order in quantity.
Can it be surface mounted?
Ask us about a surface mounting kit for this size before ordering. The panel itself is designed for grid and recessed installation.
Is the driver included?
Confirm the driver specification with your order so it matches your market voltage and any dimming requirement.
Will this panel fit my ceiling grid?
Compare the published dimensions on this page with your grid opening. Metric grids are usually 300mm or 600mm modules.
How deep are the panels?
The flat panel series is 12 to 13mm deep depending on model. The round and square recessed series are 12.5 to 19mm. The figure is in each specification table.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For 180x180mm Square LED Panel Light 550lm
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.