Standard LED Flood Lights
Mains-powered fixed flood lights from 10W to 50W with published illuminance at distance.
All 4 Standard LED Flood Lights Models
The standard flood light family is the workhorse: permanent, mains-powered, no sensor, no battery. Four wattages from 10W to 50W cover most fixed outdoor lighting, and like the PIR family, each model publishes average illuminance at measured distances rather than leaving coverage to be discovered on site.
What Buyers Come To Us With
Flood light coverage is only discovered after installation
Average illuminance at stated distances is published for all four wattages, so a layout can be planned on paper.
Halogen flood lights cost too much to run
These replace halogen floodlighting at a fraction of the load while publishing their actual lumen output for comparison.
Sensor units are installed where permanent light was wanted
This family is deliberately sensor-free for areas that must stay lit.
Mixed wattages from different suppliers look inconsistent on a building
A single family from 10W to 50W keeps appearance and colour consistent across a site.
Buyers This Range Suits
- Electrical contractors on fixed outdoor installations
- Facilities and estate managers
- Distributors supplying commercial outdoor lighting
- Sports, storage and industrial site operators
What Separates It
- 10W, 20W, 30W and 50W in one visual family
- Average illuminance published at measured distances
- Luminous flux from roughly 760 to 4500 lumens
- No sensor, for areas that must remain lit
Where Standard LED Flood Lights Get Installed
Building facade and signage lighting
Yard, compound and storage area lighting
Loading bays and access roads
Industrial and agricultural buildings
Industries Buying Standard LED Flood Lights
Where Standard LED Flood Lights Appears In A Build
Guides Related To Standard LED Flood Lights
Standard LED Flood Lights Questions
What is the difference between this and the PIR series?
The same wattage steps without a motion sensor. Use this family where the light must stay on and the PIR family where it should only come on for movement.
How much light does each wattage give?
Roughly 760 to 860 lumens at 10W up to 4350 to 4500 lumens at 50W, with average illuminance at distance published as well.
Are they suitable for permanent outdoor mounting?
They are outdoor flood lights, but confirm the IP rating in writing with us for the specific model before quoting into a tender.
Can they be dimmed?
Dimming is not specified on this family. For dimmable output look at the rechargeable dimmable flood lights.
Quote Standard LED Flood Lights For Your Next Order
Send the models and quantities you need. We reply with pricing, packaging options and the certification position in writing.