100W Sliver Finish High Bay Light
The FD-HB030H100 is a 100W high bay luminaire designed for industrial and commercial spaces requiring robust, long-life lighting with a silver finish. The fixture is constructed from aluminium with an IP65 rating, making it suitable for environments with dust and water spray. It operates on AC85-265V, allowing compatibility with standard mains supply across regions. The unit is supplied with a FENGDIAN driver and can be installed using a sling chain or suspender, ideal for high-ceiling applications in warehouses, factories, and workshops.
| Model | FD-HB030H100 |
|---|---|
| Power | 100W |
| Input Voltage | AC85-265V |
| IP Rating | IP65 |
| Dimension | Silver D400 x H285 mm |
| Material | Aluminium |
| LED Chip | E27 |
| Driver | FENGDIAN |
| Warranty | 3 Years |
Key Benefits
- IP65 rating protects against dust and water spray in industrial environments
- Aluminium construction provides good heat dissipation and structural durability
- AC85-265V input supports stable operation across varying regional voltages
- Sling chain or suspender mounting allows flexible installation in high-ceiling spaces
- 100W power delivers high output suitable for large area illumination
- Silver finish offers a clean, modern appearance in commercial and industrial settings
Application Scenarios
- Lighting large warehouse interiors with high ceilings and high traffic
- Illuminating factory production floors where dust and moisture are present
- Providing general lighting in commercial workshops and maintenance bays
- Installing in distribution centres requiring durable, long-life fixtures
- Upgrading existing lighting in industrial buildings with consistent performance
Who It Is For
- Industrial lighting contractors specifying high bay lights for factory and warehouse projects
- Facility managers sourcing durable, low-maintenance lighting for high-ceiling spaces
- Electrical wholesalers supplying industrial lighting in Europe and the Middle East
- Brand owners sourcing OEM high bay lights under their own label with custom logo
Problems It Solves
- Dust and moisture ingress in industrial spaces can damage less protected fixtures
- Inconsistent voltage supply across regions can cause premature failure in non-wide-range fixtures
- Poor heat dissipation in low-quality housings reduces LED lifespan and output
- Lack of flexible mounting options limits installation in varied ceiling structures
- Short warranty periods increase long-term ownership cost for industrial users
Technical Features
- Aluminium body for effective heat transfer and structural strength
- IP65 rating for protection against dust and water spray
- AC85-265V input range for stable operation across different power supplies
- FENGDIAN driver included for reliable power regulation
- Sling chain or suspender mounting for high ceiling installations
- Silver finish on D400 x H285mm housing for visual consistency in commercial spaces
Materials
- Aluminium body for heat dissipation and structural rigidity
- Silver finish coating for corrosion resistance and visual appeal
- FENGDIAN driver for stable current regulation
- Sling chain or suspender hardware for secure ceiling mounting
Manufacturing Process
- Aluminium body die-casting and surface finishing
- Driver assembly and integration with the fixture
- Sealing and gasket fitting to achieve IP65 rating
- Final assembly with mounting hardware
- Powered ageing test before packing
Quality Control
- Incoming inspection of aluminium castings and driver components
- IP65 sealing verification using pressure and spray test
- Powered ageing run for 24 hours before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Driver can be supplied fitted or omitted when centralised drivers are used
- Mounting type can be adapted to sling chain or suspender as required
- OEM and ODM production available for buyers selling under their own brand
Compared With the Alternatives
Plastic high bay light
More durable and heat-resistant, but heavier and more expensive
Low-voltage high bay light
Requires centralised drivers, but offers lower risk in high-traffic industrial zones
Non-IP65 rated high bay
Less suitable for dusty or wet environments, increasing maintenance needs
Use Guide
- Ensure ceiling mounting points can support the fixture and chain weight
- Install the sling chain or suspender securely to prevent movement during operation
- Verify the AC85-265V supply matches the local voltage before connection
- Keep the fixture clean and free from dust build-up to maintain output
- Inspect the mounting hardware and chain periodically for wear or loosening
100W Sliver Finish High Bay Light Questions
What is the input voltage range for this high bay light?
The fixture operates on AC85-265V, suitable for standard mains supply across different regions.
Is the driver included?
Yes, the FENGDIAN driver is included with the fixture. It can also be supplied without the driver if centralised drivers are used.
What is the IP rating and what does it mean?
The fixture has an IP65 rating, which means it is protected against dust and water spray, suitable for industrial environments.
Can I install this light with a suspender instead of a sling chain?
Yes, the fixture is designed for both sling chain and suspender mounting, depending on site requirements.
What is the warranty period?
This model carries a 3 year warranty. Across the FENGDIAN range, warranties range from 2 to 5 years depending on the product.
Can I order a sample before placing a bulk order?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship within 3-5 days.
How long does mass production take?
Mass production is typically 1-2 weeks, and goods normally ship by DHL, UPS, FedEx or TNT with 3-5 days in transit, or by air or sea freight.
Related Products
Request a Quotation for 100W Sliver Finish High Bay Light
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.