100W E27 Bulb High Bay Light
The FD-HB020H100 is a 100W high bay light designed for industrial and commercial indoor spaces such as warehouses, factories, workshops and large retail halls. It uses an E27 bulb socket to accept standard E27 LED bulbs, allowing for easy replacement or upgrade of the light source. The fixture is made from aluminium for efficient heat dissipation and has an IP65 rating for protection against dust and water jets, suitable for environments with moderate moisture or cleaning routines. It operates on AC85-265V, making it compatible with standard mains voltage across different regions.
| Model | FD-HB020H100 |
|---|---|
| Power | 100W |
| Input Voltage | AC85-265V |
| IP Rating | IP65 |
| Dimension | Sliver D360 x H165 mm |
| Material | Aluminium |
| LED Chip | E27 |
| Driver | FENGDIAN |
| Warranty | 3 Years |
Key Benefits
- Uses standard E27 bulb socket, allowing for quick bulb replacement or future upgrades
- Aluminium body provides effective heat dissipation for longer LED lifespan
- IP65 rating protects against dust and water jets, suitable for industrial environments
- AC85-265V input supports stable operation across different regional voltages
- D360 x H165 mm dimension fits standard high bay mounting heights
- FENGDIAN driver ensures reliable performance with consistent output
Application Scenarios
- Lighting large open areas in industrial warehouses with high ceilings
- Illuminating factory production floors where dust and moisture are present
- Providing general lighting in large retail halls and distribution centres
- Replacing older high bay fixtures in commercial buildings with a standard E27 interface
Who It Is For
- Industrial facility managers upgrading lighting in high-ceiling warehouses
- Electrical contractors installing high bay lights in commercial and industrial projects
- Lighting designers specifying fixtures with standard E27 compatibility
- Brand owners sourcing OEM high bay lights under their own label
Problems It Solves
- Older high bay fixtures with non-standard bulbs require custom replacements
- Poor heat dissipation in plastic or low-grade metal housings shortens LED life
- Lack of dust and water protection in low IP-rated fixtures leads to early failure in harsh environments
- Voltage fluctuations in different regions can damage non-wide-range input fixtures
Technical Features
- E27 bulb socket accepts standard LED bulbs for easy maintenance
- Aluminium body for effective heat transfer and structural durability
- IP65 rating for resistance to dust and water jets
- AC85-265V input for stable operation across varying mains voltages
- FENGDIAN driver integrated for reliable power regulation
- D360 x H165 mm size suitable for standard high bay mounting systems
Materials
- Aluminium body for heat dissipation and structural strength
- E27 bulb socket for compatibility with standard LED bulbs
- Sealed housing with gaskets to maintain IP65 protection
Manufacturing Process
- Aluminium body machining and surface finishing
- Assembly of E27 bulb socket and internal wiring
- Installation of FENGDIAN driver and electrical connections
- Sealing and gasket fitting to achieve IP65 rating
- Powered ageing test before packing
Quality Control
- Incoming inspection of E27 bulbs and FENGDIAN drivers
- IP65 sealing verification before final closure
- Powered ageing test under full load before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing, confirmed against an approved sample before production
- Available with or without driver depending on site control strategy
- OEM and ODM production for buyers selling under their own brand
- Standard E27 socket allows for future bulb upgrades
Compared With the Alternatives
High bay with integrated LED module
Higher initial cost, but no need to replace bulbs; this model allows bulb replacement for lower long-term maintenance cost
Plastic-bodied high bay
Less durable and less heat-resistant; aluminium body improves lifespan and safety in high-heat environments
IP40-rated high bay
Not suitable for dusty or wet environments; IP65 ensures reliability in industrial settings with cleaning or moisture
Use Guide
- Mount the fixture at the recommended height for even illumination across the space
- Ensure the E27 bulb is properly seated and compatible with the 100W power rating
- Use the FENGDIAN driver as supplied or replace with a compatible driver if needed
- Clean the fixture surface periodically to maintain heat dissipation and output
- Avoid direct exposure to high-pressure water jets to preserve IP65 integrity
100W E27 Bulb High Bay Light Questions
What type of bulb fits this high bay light?
It uses an E27 bulb socket, so standard E27 LED bulbs can be installed.
Is the driver included?
Yes, the fixture comes with a FENGDIAN driver. It can also be supplied without a driver if centralised drivers are used.
What is the IP rating and where is it suitable?
The fixture has an IP65 rating, suitable for indoor industrial environments with dust or water jets from cleaning.
Can I use a different bulb than the one supplied?
Yes. The E27 socket allows for replacement with any compatible E27 LED bulb.
What is the warranty period?
This model carries a 3 year warranty. Across the FENGDIAN range, warranty is 2 to 5 years depending on the product.
How long does it take to receive a sample?
Sample orders are accepted and typically ship within 3-5 days.
How long is the mass production lead time?
Mass production is typically 1-2 weeks, with shipping via DHL, UPS, FedEx or TNT taking 3-5 days in transit.
Related Products
Request a Quotation for 100W E27 Bulb High Bay Light
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.