Mon to Sat 8:00 to 17:30 GMT+8Established 2001 in Dongguan China
[email protected]WhatsApp +86-18717460938
Request A Quote
T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers - Garfour view 1
T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers - Garfour view 2T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers - Garfour view 3T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers - Garfour view 4T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers - Garfour view 5T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers - Garfour view 6
Automotive Wiring Harness

T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers

A T-harness adapter that plugs between the vehicle connector and an aftermarket amplifier on Jeep Wrangler and Chrysler vehicles, keeping the factory amplifier circuits intact. The T layout taps the loom without cutting a single factory wire.

  • T layout taps the vehicle loom with no cutting and no splicing
  • Retains the factory amplifier function after the upgrade
  • Plug-in fitting turns an audio retrofit into a short bay job
  • Reversible install protects vehicle warranty and resale
Request A Quote Email This Specification

Samples ship within 3 days of confirmation. Bulk lead time is typically 7 to 12 days.

Problems It Solves

  • Cutting the factory loom kills the original amplifier function
  • Spliced audio installs create noise and warranty disputes
  • Every install wired differently makes fault-finding slow

Who It Is For

  • Car audio installers
  • Vehicle accessory fitters
  • Aftermarket audio brands

Application Scenarios

  • Aftermarket amplifier retrofits on Jeep Wrangler and Chrysler models
  • Audio upgrades in dealer accessory programmes
  • Workshop installs needing reversible wiring

Technical Features

  • T-harness pass-through layout
  • OBD2 style plug connector
  • Factory amplifier retention wiring

Specifications

ApplicationJeep Wrangler and Chrysler amplifier retrofit
TypeT-harness adapter
FunctionRetains OEM factory amplifier

Values shown are the standard build. Connector family, conductor gauge, circuit count and finished length are all build options.

Quality Control And Certification

  • Continuity And Circuit Verification. Verifies the physical arrangement sequence of the harness terminals and the circuit topology between them
  • Circuit Configuration Verification. Confirms that a complete, uninterrupted current flow path exists within each circuit
  • Terminal Retention Strength Test. Measures the mechanical reliability of the connection between the terminal and the wire
  • Ingress Protection Rating Test. Evaluates the dust and water resistance sealing performance of harness connectors

The company is certified to IATF 16949 and UL standards. Samples are confirmed prior to trial or mass production, and the approved sample is the reference for every repeat order.

Customization Options

  • Connector family and terminal type to your part numbers
  • Conductor gauge selected from the current per circuit
  • Finished length and breakout positions to your drawing
  • Jacket colour, marking and labelling to your scheme
  • Packing to your instruction, PE bag and carton as standard

Compared With The Alternatives

Cut and splice looms

A T-harness leaves the factory wiring untouched and the install reversible

Full replacement harnesses

A pass-through adapter is a fraction of the fitting time

Use Guide

  • Disconnect the battery before unplugging the factory amplifier connector
  • Route the adapter so the connector bodies are supported, not hanging
  • Confirm factory audio functions before refitting the trim
Related Products

Other Assemblies In Automotive Wiring Harness

10AWG SAE To SAE Extension Cable 6m Quick Disconnect - Garfour view 1 Automotive Wiring Harness 10AWG SAE To SAE Extension Cable 6m Quick Disconnect20 foot 10AWG SAE extension lead for solar panels and battery charging View Specifications ISM M11 ECU Engine Wiring Harness For GMC And Deutz - Garfour view 1 Automotive Wiring Harness ISM M11 ECU Engine Wiring Harness For GMC And DeutzHeavy duty ECU engine harness for ISM M11 and GM HD applications View Specifications LS3 LS2 6.2L Standalone Harness With 58x Drive By Wire - Garfour view 1 Automotive Wiring Harness LS3 LS2 6.2L Standalone Harness With 58x Drive By WireStandalone LS3 and LS2 harness for 58x drive by wire truck and Corvette builds View Specifications Rocker Switch Wiring Loom For Trucks ATV And Trailers - Garfour view 1 Automotive Wiring Harness Rocker Switch Wiring Loom For Trucks ATV And TrailersSwitched accessory loom for car truck ATV UTV yacht and trailer fitments View Specifications
Related Reading

Guides That Cover This Build

Buying Guide

How To Specify A Custom Wire Harness For Quotation

What a harness manufacturer actually needs from you before a quotation means anything, and what happens when those details are missing.

 Process Guide

Four Tests That Decide Whether A Wire Harness Is Sound

Continuity, circuit configuration, terminal retention and ingress protection, and what each one catches that the others do not.

 Buying Guide

What To Check Before Ordering A Standalone Engine Harness

Crank reluctor generation, throttle type and transmission control decide whether a standalone loom will run your engine at all.

T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers FAQ

Will the factory amplifier still work?

Yes. The harness is built to retain the OEM amplifier circuits.

Which models does it fit?

It is built for Jeep Wrangler and Chrysler applications. Send your model and year to confirm the connector.

Is a sample confirmed before mass production of T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers?

Yes. Samples are confirmed prior to trial or mass production on every custom build, so the first production shipment is not the first time you see the part.

Can T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers be built to our own drawing?

Yes. We are open to OEM projects whenever you can provide a drawing or a physical sample, and the approved sample becomes the reference for repeat orders.

Where is the factory and can we visit?

Our factory is in Humen Town, Dongguan City, Guangdong Province, a 30 minute drive from Shenzhen International Airport. We welcome visits at any time.

Get A Price On T-Harness OBD2 Adapter For Jeep And Chrysler Amplifiers

Tell us the quantity, the finished length and any change to the connector set. We come back with the price, the lead time and a sample plan.

Chat On WhatsApp Email Our Engineers