Alkyl Silicone Fluid
Alkyl Aryl modified Silicone Fluid BL-225
BL-225 is a medium viscosity alkyl and aryl modified silicone fluid. It owns good lubricity, mold release, hydrophobicity, compatibility with…
BL-225 View technical index
Industry
Silicone for Plastics, Rubber & Mould Release
A release agent has one job and two constraints: let the part out, and leave nothing behind that stops painting, plating or printing.
The pain points
What Goes Wrong Without the Right Silicone
01
Release agents that transfer and ruin downstream finishing.
02
Carbonisation and smoke on hot dies, leaving residue on the tool.
03
Build-up that forces the line to stop for tool cleaning.
04
Rubber and plastic processing that needs internal lubricity, not just a spray.
What we bring
How the Blissam Range Answers It
- BL-225 alkyl aryl modified fluid — no carbonation at 360 °C, no residue or smoke on the die.
- Dimethyl and methyl hydrogen fluids as release and hydrophobic agents.
- Silicone emulsions for dilute, water-borne release on rubber and tyre lines.
- Grades that do not impair post-processing such as painting, electroplating and printing.
Product lines used here
Where To Start In the Catalogue
- Vinyl Silicone Fluid — 3 grades used here
- Silicone Emulsion — 3 grades used here
- Alkyl Silicone Fluid — 2 grades used here
- Dimethyl Silicone Fluid — 2 grades used here
- Hydroxy Silicone Fluid — 2 grades used here
- Defoamer — 1 grade used here
- Heat Conduction Silicone Rubber — 1 grade used here
- Silicone Resin — 1 grade used here
Matching grades
20 Grades With Published Relevance To This Sector
Each grade below appears here because its own product page says so. The evidence table underneath quotes the sentence.
Defoamer
Defoamer
Defoamer is a kind of chemical agent, which actually means to eliminate foam. It is a substance with low surface tension and high surface activity,…
View technical index
Dimethyl Silicone Fluid
Dimethyl Silicone Fluid BL-201
BL-201 is a polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities from…
BL-201 View technical index
Dimethyl Silicone Fluid
Dimethyl Silicone Oil BL-201L
Dimethyl Silicone Oil BL-201L (0.65cst)
BL-201L View technical index
Heat Conduction Silicone Rubber
Heat Conduction Silicone Rubber
Thermal conductive gaskets are used to fill the air gap between heating devices and heat sinks or metal bases, and their flexible and elastic…
View technical index
Hydroxy Silicone Fluid
Hydroxy Silicone Fluid BL-107
Chemical name：Silanol Terminated Polydimethylsiloxane
BL-107 View technical index
Hydroxy Silicone Fluid
Hydroxy Silicone Fluid BL-207
Chemical name：Silanol Terminated Polydimethylsiloxane Molecular Formula: HO[-Si(CH3)2O-]nH Chemical structure:
BL-207 View technical index
Vinyl Silicone Fluid
Hydroxyl Vinyl Silicone Fluid BL-205
Product Code:BL-205 Synonyms: Hydroxyl Vinyl Polysiloxane, Hydroxyl terminated vinyl methyl silicone fluid, Silanol Terminated…
BL-205 View technical index
Alkyl Silicone Fluid
Long-chain Alkyl Silicone Fluid BL-222
BL-222 is a alkyl modified silicone fluid offers good lubricity, mold release, hydrophobicity, compatibility and printability.
BL-222 View technical index
Silicone Resin
MQ Resin Powder BL-M300 Series
BL-M300 MQ resin is a co-hydrolysis product of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit).
BL-M300 View technical index
Methyl Hydrogen Silicone Fluid
Methyl Hydrogen Silicone Fluid BL-202
Chemical Structure:
BL-202 View technical index
Water Repellents
Methyl Hydrogen Silicone Oil BL-202
Synonyms: Polymethylhydrogen Siloxane Fluid, Methyl hydrogen silicone oil, Methyl hydrogen polysiloxane, Water repellent, water proofing agent,…
BL-202 View technical index
| Grade | Published application text |
|---|---|
| Alkyl Aryl modified Silicone Fluid BL-225 | Used to manufacture the release agent that be used in many kinds of metal die casting, such as aluminum, magnesium, zinc alloy die-casting. |
| Defoamer | Defoamer is a kind of chemical agent, which actually means to eliminate foam. It is a substance with low surface tension and high surface activity, and can control or eliminate foam in the… |
| Dimethyl Silicone Fluid BL-201 | used as releasing agents for the production processing of rubber, plastic products and castings. |
| Dimethyl Silicone Oil BL-201L | Application * used as an important raw material for the preparation of silicone oils, silicone rubbers and pharmaceutical synthesis; * used as an analytical reagent, Gas chromatographic… |
| Heat Conduction Silicone Rubber | Thermal conductive gaskets are used to fill the air gap between heating devices and heat sinks or metal bases, and their flexible and elastic characteristics enable them to cover very… |
| Hydroxy Silicone Fluid BL-107 | Application Silicone OH polymer can be used in variety of applications, including: 1. In RTV silicone rubber, mould defoaming agent, silicone rubber for main raw material in glass, with no… |
| Hydroxy Silicone Fluid BL-207 | Application Hydroxy Silicone Fluid BL-207 can be used in variety of applications, including: 1. In RTV silicone rubber, mould defoaming agent, silicone rubber for main raw material in… |
| Hydroxyl Vinyl Silicone Fluid BL-205 | This product is mainly used as the basis of add molding silicone rubber compound, is also available for preparation silicone modified acrylic resins, latex, etc. |
| Long-chain Alkyl Silicone Fluid BL-222 | Alkyl modified silicone oil in the form of a grease-like solid can be used as a lubricant for fibers and yarns and a processing agent for melt spinning after mixing with paraffin. * As a… |
| MQ Resin Powder BL-M300 Series | Reinforcing material: Condensation type liquid silicone rubber(LSR). 2. Release agent: For urethane rubber such as shoe sole. 3. Silicone Defoamer: It can be used to prepare… |
| Methyl Hydrogen Silicone Fluid BL-202 | Application * used for hydrophobic and moisture-proof treatment of dry powder extinguishing agent, electrical grade magnesia powder, calcium carbonate and other dry powder materials. *… |
| Methyl Hydrogen Silicone Oil BL-202 | Application * used for hydrophobic and moisture-proof treatment of dry powder extinguishing agent, electrical grade magnesia powder, calcium carbonate and other dry powder materials. *… |
| Silicone Emulsion BL-E580 | Textile industry lubrication of the yarns submitted to friction; * Plastic and rubber mold- release agent; * Leather and furniture polishing agents; * For production of polishing wax… |
| Silicone Emulsion BL-E586 | Mold release of rubber or plastic parts (stoppers, screw tops, bungs, etc.) * Lubrication of extruded rubber parts conveyor belts * Textile lubricant for yarn manufacture, sewing thread… |
How we deliver
From Enquiry To Repeat Supply
- DefineProcess step, substrate, target property, volume.
- SelectGrade shortlist with technical index and SDS.
- TrialSample with certificate of analysis for your line.
- FixSpecification agreed in writing before bulk.
- ShipDrum, IBC or bulk with export documents.
Answers
Plastics, Rubber & Mould Release — Sourcing Questions
Which Blissam grades are relevant to plastics, rubber & mould release?
20 catalogue grades carry published application text covering this sector, concentrated in Vinyl Silicone Fluid, Silicone Emulsion, Alkyl Silicone Fluid. The table on this page shows the exact sentence from each product page that puts it here.
Do you supply to formulators or to end users?
Both. Blissam sells to distributors, formulators and end users, and works to an open collaboration model where the grade is developed around what the customer's process actually needs.
Can a grade be adjusted for our process window?
Yes. Viscosity, active content, modification ratio, emulsion particle size and pH are adjustable in-house. Tailored grades are supplied against a written specification and validated with a trial quantity first.
What technical documentation is available?
Technical data sheet, safety data sheet and a per-batch certificate of analysis for every grade. Send the list of grade codes and we will issue the set together.
Where do you ship from and to?
From Hangzhou, Zhejiang, China, to distributors and end users in North America, South America, Southeast Asia, Europe, the Middle East, Russia and Australia.
Get a Grade Recommendation for Plastics, Rubber & Mould Release
Tell us the process step and the property you need to hit. We will shortlist two or three grades from the catalogue and send their technical index, or quote a tailored grade if nothing standard fits.