Volatile Silicone Fluid
Cyclomethicones BL-024
[INCI/CTFA] Cyclopentasiloxane
BL-024 View technical index
Industry
Silicone for Coatings, Inks & Adhesives
A coating fails at the surface — craters, orange peel, foam pinholes, poor recoat. Silicone is how you control that surface without wrecking intercoat adhesion.
The pain points
What Goes Wrong Without the Right Silicone
01
Foam generated in high-speed dispersion that will not knock down before filling.
02
Craters and fisheyes from contamination or poor substrate wetting.
03
Weathering and heat resistance requirements a pure organic binder cannot meet.
04
Release performance that has to be repeatable across a coating line.
What we bring
How the Blissam Range Answers It
- Defoamers and silicone emulsions for foam control in water-borne systems.
- Silicone resins and MQ resins for heat-resistant and weather-resistant binders.
- Silicone release coatings for liners, labels and non-stick surfaces.
- Hydroxy and vinyl terminated fluids as reactive intermediates in your own resin.
Product lines used here
Where To Start In the Catalogue
- Dimethyl Silicone Fluid — 2 grades used here
- Hydroxy Silicone Fluid — 2 grades used here
- Volatile Silicone Fluid — 1 grade used here
- Defoamer — 1 grade used here
- Fluoro Silicone Oil — 1 grade used here
- Silicone Resin — 1 grade used here
- Polymethylsilsequioxane — 1 grade used here
Matching grades
9 Grades With Published Relevance To This Sector
Each grade below appears here because its own product page says so. The evidence table underneath quotes the sentence.
Defoamer
Defoamer
Defoamer is a kind of chemical agent, which actually means to eliminate foam. It is a substance with low surface tension and high surface activity,…
View technical index
Dimethyl Silicone Fluid
Dimethyl Silicone Fluid BL-201
BL-201 is a polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities from…
BL-201 View technical index
Dimethyl Silicone Fluid
Dimethyl Silicone Oil BL-201L
Dimethyl Silicone Oil BL-201L (0.65cst)
BL-201L View technical index
Hydroxy Silicone Fluid
Hydroxy Silicone Fluid BL-107
Chemical name：Silanol Terminated Polydimethylsiloxane
BL-107 View technical index
Hydroxy Silicone Fluid
Hydroxy Silicone Fluid BL-207
Chemical name：Silanol Terminated Polydimethylsiloxane Molecular Formula: HO[-Si(CH3)2O-]nH Chemical structure:
BL-207 View technical index
Silicone Resin
MQ Resin Powder BL-M300 Series
BL-M300 MQ resin is a co-hydrolysis product of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit).
BL-M300 View technical index
Polymethylsilsequioxane
Silicone Micro Powder BL-P100 Series
INCI Name: Polymethylsilsesquioxane
BL-P100 View technical index
| Grade | Published application text |
|---|---|
| Cyclomethicones BL-024 | BL-024 may be used in personal care products including antiperspirants, skin, sun care, hair conditioners, color cosmetics and particle/pigment treatment. etc. |
| Defoamer | Defoamer is a kind of chemical agent, which actually means to eliminate foam. It is a substance with low surface tension and high surface activity, and can control or eliminate foam in the… |
| Dimethyl Silicone Fluid BL-201 | used as defoaming agents, lubricants, transformer oils, damping oils and diffusion pump fluids in petroleum, chemical, medical, pharmaceutical, food processing, textile, printing and… |
| Dimethyl Silicone Oil BL-201L | Dimethyl Silicone Oil BL-201L is mainly used in lubricants, dispersants, foam stabilizers, defoaming agents and other fields. It can also be used in personal care products such as… |
| Fluoro Silicone Oil Series | Fluorosilicone oil, due to the introduction of fluorine groups, has better oil resistance, solvent resistance, chemical stability, and good lubrication under extreme pressure conditions.… |
| Hydroxy Silicone Fluid BL-107 | Application Silicone OH polymer can be used in variety of applications, including: 1. In RTV silicone rubber, mould defoaming agent, silicone rubber for main raw material in glass, with no… |
| Hydroxy Silicone Fluid BL-207 | Application Hydroxy Silicone Fluid BL-207 can be used in variety of applications, including: 1. In RTV silicone rubber, mould defoaming agent, silicone rubber for main raw material in… |
| MQ Resin Powder BL-M300 Series | Reinforcing material: Condensation type liquid silicone rubber(LSR). 2. Release agent: For urethane rubber such as shoe sole. 3. Silicone Defoamer: It can be used to prepare… |
| Silicone Micro Powder BL-P100 Series | INCI Name: Polymethylsilsesquioxane |
How we deliver
From Enquiry To Repeat Supply
- DefineProcess step, substrate, target property, volume.
- SelectGrade shortlist with technical index and SDS.
- TrialSample with certificate of analysis for your line.
- FixSpecification agreed in writing before bulk.
- ShipDrum, IBC or bulk with export documents.
Answers
Coatings, Inks & Adhesives — Sourcing Questions
Which Blissam grades are relevant to coatings, inks & adhesives?
9 catalogue grades carry published application text covering this sector, concentrated in Dimethyl Silicone Fluid, Hydroxy Silicone Fluid, Volatile Silicone Fluid. The table on this page shows the exact sentence from each product page that puts it here.
Do you supply to formulators or to end users?
Both. Blissam sells to distributors, formulators and end users, and works to an open collaboration model where the grade is developed around what the customer's process actually needs.
Can a grade be adjusted for our process window?
Yes. Viscosity, active content, modification ratio, emulsion particle size and pH are adjustable in-house. Tailored grades are supplied against a written specification and validated with a trial quantity first.
What technical documentation is available?
Technical data sheet, safety data sheet and a per-batch certificate of analysis for every grade. Send the list of grade codes and we will issue the set together.
Where do you ship from and to?
From Hangzhou, Zhejiang, China, to distributors and end users in North America, South America, Southeast Asia, Europe, the Middle East, Russia and Australia.
Get a Grade Recommendation for Coatings, Inks & Adhesives
Tell us the process step and the property you need to hit. We will shortlist two or three grades from the catalogue and send their technical index, or quote a tailored grade if nothing standard fits.