Alkyl Silicone Fluid
Alkyl Aryl modified Silicone Fluid BL-225
BL-225 is a medium viscosity alkyl and aryl modified silicone fluid. It owns good lubricity, mold release, hydrophobicity, compatibility with…
BL-225 View technical index
Industry
Silicone for Industrial Processing & Defoaming
Foam is lost volume, lost throughput and lost yield. It shows up in fermentation, water treatment, metalworking, cleaning and every high-shear mixing step.
The pain points
What Goes Wrong Without the Right Silicone
01
Foam carry-over that de-rates a reactor or a tank below its nameplate volume.
02
Defoamers that knock foam down once and then stop working.
03
Additives that contaminate the product or interfere with downstream separation.
04
Vacuum and lubrication duties where mineral oil cannot take the temperature.
What we bring
How the Blissam Range Answers It
- Silicone defoamer and emulsion grades for aqueous foam control.
- Vacuum diffusion pump fluids for high-vacuum service.
- Alkyl and phenyl modified fluids as high-temperature lubricants and base oils.
- Hydrophobic agents used in petroleum and polymer processing.
Product lines used here
Where To Start In the Catalogue
- Silicone Resin/Wax/Gum — 4 grades used here
- Alkyl Silicone Fluid — 2 grades used here
- Volatile Silicone Fluid — 2 grades used here
- Dimethyl Silicone Fluid — 2 grades used here
- Hydroxy Silicone Fluid — 2 grades used here
- Silicone Elastomer — 2 grades used here
- Silicone Emulsion — 2 grades used here
- Compound Silicone Fluid — 2 grades used here
Matching grades
26 Grades With Published Relevance To This Sector
Each grade below appears here because its own product page says so. The evidence table underneath quotes the sentence.
Volatile Silicone Fluid
Cyclomethicones BL-024
[INCI/CTFA] Cyclopentasiloxane
BL-024 View technical index
Volatile Silicone Fluid
Cyclomethicones BL-025
[INCI/CTFA] Cyclopentasiloxane (and) Cyclohexasiloxane
BL-025 View technical index
Defoamer
Defoamer
Defoamer is a kind of chemical agent, which actually means to eliminate foam. It is a substance with low surface tension and high surface activity,…
View technical index
Dimethyl Silicone Fluid
Dimethyl Silicone Fluid BL-201
BL-201 is a polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities from…
BL-201 View technical index
Dimethyl Silicone Fluid
Dimethyl Silicone Oil BL-201L
Dimethyl Silicone Oil BL-201L (0.65cst)
BL-201L View technical index
Hydroxy Silicone Fluid
Hydroxy Silicone Fluid BL-107
Chemical name：Silanol Terminated Polydimethylsiloxane
BL-107 View technical index
Hydroxy Silicone Fluid
Hydroxy Silicone Fluid BL-207
Chemical name：Silanol Terminated Polydimethylsiloxane Molecular Formula: HO[-Si(CH3)2O-]nH Chemical structure:
BL-207 View technical index
Alkyl Silicone Fluid
Long-chain Alkyl Silicone Fluid BL-222
BL-222 is a alkyl modified silicone fluid offers good lubricity, mold release, hydrophobicity, compatibility and printability.
BL-222 View technical index
Silicone Resin
MQ Resin Powder BL-M300 Series
BL-M300 MQ resin is a co-hydrolysis product of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit).
BL-M300 View technical index
| Grade | Published application text |
|---|---|
| Alkyl Aryl modified Silicone Fluid BL-225 | The product has good adsorption of metal materials and excellent lubrication, the lubrication of aluminum is especially good, it can be used as metal lubricant and can also be used as the… |
| Cyclomethicones BL-024 | BL-024 is cyclopentasiloxane .The product is nontoxic, odorless, colorless, and tasteless. The product has high compatibility with lots of cosmetic ingredients, with the benefits of… |
| Cyclomethicones BL-025 | BL-025 is is a mixture comprised of cyclomethicone D5 and D6, with the clear and nontoxic properties The product has high compatibility with lots of cosmetic ingredients, with the benefits… |
| Defoamer | Defoamer is a kind of chemical agent, which actually means to eliminate foam. It is a substance with low surface tension and high surface activity, and can control or eliminate foam in the… |
| Dimethyl Silicone Fluid BL-201 | used as defoaming agents, lubricants, transformer oils, damping oils and diffusion pump fluids in petroleum, chemical, medical, pharmaceutical, food processing, textile, printing and… |
| Dimethyl Silicone Oil BL-201L | Dimethyl Silicone Oil BL-201L is mainly used in lubricants, dispersants, foam stabilizers, defoaming agents and other fields. It can also be used in personal care products such as… |
| Fluoro Silicone Oil Series | Fluorosilicone oil, due to the introduction of fluorine groups, has better oil resistance, solvent resistance, chemical stability, and good lubrication under extreme pressure conditions.… |
| Hydroxy Silicone Fluid BL-107 | Application Silicone OH polymer can be used in variety of applications, including: 1. In RTV silicone rubber, mould defoaming agent, silicone rubber for main raw material in glass, with no… |
| Hydroxy Silicone Fluid BL-207 | Application Hydroxy Silicone Fluid BL-207 can be used in variety of applications, including: 1. In RTV silicone rubber, mould defoaming agent, silicone rubber for main raw material in… |
| Long-chain Alkyl Silicone Fluid BL-222 | Base oil for lubricating grease: it can be used for lubrication between stainless steel and titanium steel, as lubricating oil for aluminum machines, etc. |
| MQ Resin Powder BL-M300 Series | Reinforcing material: Condensation type liquid silicone rubber(LSR). 2. Release agent: For urethane rubber such as shoe sole. 3. Silicone Defoamer: It can be used to prepare… |
| Phenyl Silicone Fluid BL-250 | Base oil for high temperature ball bearing greases. |
| Silicone Elastomer Powder BL-9701 | No need to heat up to use, firstly use low viscosity silicone oil (such as 3CST or 5CST), or grease (isopropyl myristate) to disperse the ingredients. Then use a homogenizer to stir it… |
| Silicone Elastomer Suspension BL-9509 | Silicone Elastomer Emulsion can be mixed with water. Add into system of emulsion formulation directly is better for its dispersibility.It is recommended to add cyclomethicone and… |
How we deliver
From Enquiry To Repeat Supply
- DefineProcess step, substrate, target property, volume.
- SelectGrade shortlist with technical index and SDS.
- TrialSample with certificate of analysis for your line.
- FixSpecification agreed in writing before bulk.
- ShipDrum, IBC or bulk with export documents.
Answers
Industrial Processing & Defoaming — Sourcing Questions
Which Blissam grades are relevant to industrial processing & defoaming?
26 catalogue grades carry published application text covering this sector, concentrated in Silicone Resin/Wax/Gum, Alkyl Silicone Fluid, Volatile Silicone Fluid. The table on this page shows the exact sentence from each product page that puts it here.
Do you supply to formulators or to end users?
Both. Blissam sells to distributors, formulators and end users, and works to an open collaboration model where the grade is developed around what the customer's process actually needs.
Can a grade be adjusted for our process window?
Yes. Viscosity, active content, modification ratio, emulsion particle size and pH are adjustable in-house. Tailored grades are supplied against a written specification and validated with a trial quantity first.
What technical documentation is available?
Technical data sheet, safety data sheet and a per-batch certificate of analysis for every grade. Send the list of grade codes and we will issue the set together.
Where do you ship from and to?
From Hangzhou, Zhejiang, China, to distributors and end users in North America, South America, Southeast Asia, Europe, the Middle East, Russia and Australia.
Get a Grade Recommendation for Industrial Processing & Defoaming
Tell us the process step and the property you need to hit. We will shortlist two or three grades from the catalogue and send their technical index, or quote a tailored grade if nothing standard fits.