Eot crane remote control
The F24-10S is a single speed radio remote control for EOT cranes, supplied as a matched transmitter and receiver pair. Ten function buttons control ten motions at one speed, allowing an operator to manage the crane from the floor
What The Eot crane remote control Is For
The F24-10S is a single speed radio remote control for EOT cranes, supplied as a matched transmitter and receiver pair. Ten function buttons control ten motions at one speed, allowing an operator to manage the crane from the floor or a safe distance without a cab. Control range is up to 100 metres and both units are rated IP65, which ensures reliable operation in dusty, wet, or outdoor environments. Receiver voltage is specified per order from AC380V down to AC/DC12V, so the set can be installed directly onto an existing contactor panel without a transformer.
What You Get From This Unit
- Operator can control the crane from the floor or a safe distance instead of being confined to a cab
- Single speed operation simplifies training and reduces the chance of over-control
- IP65 transmitter and receiver resist dust and water, making them suitable for outdoor and wash-down areas
- Receiver voltage built to order avoids the need for a control transformer on the panel
- Over 4.3 billion unique ID codes prevent interference between nearby cranes on the same site
Where This Model Is Used
- Single girder and double girder EOT cranes in fabrication and assembly shops
- Bridge cranes where the cab view of the hook is blocked by structure or load
- Outdoor gantry cranes exposed to rain, dust, and temperature extremes
- Retrofit of an existing pendant-controlled crane without rewiring the motor panel
- Maintenance teams replacing a failed or damaged control station quickly
Buyers This Model Suits
- Crane and hoist OEMs specifying controls into new machine builds
- Maintenance contractors replacing a failed or worn-out control unit
- Equipment dealers stocking a control unit that fits multiple machine voltages
- Traders sourcing a radio control set from China with low MOQ and fast delivery
What Goes Wrong Without It
- Operator must walk with the load while holding a pendant cable that drags and snags on structures
- Cab operator cannot see the hook and must rely on hand signals from a second person
- Existing panel runs AC110V and a standard 24V receiver would require an extra transformer
- Two cranes in the same bay respond to the same transmitter due to lack of unique coding
- Pendant cable and plug fail repeatedly in wet or dusty environments
How The Unit Is Built
- 10 push buttons: 10 single speed function buttons, 1 emergency stop, 1 on/off switch
- 11 control commands from the ten single speed buttons
- Transmitter LED flashes green while battery power is sufficient and red when depleted
- Power key can be set to start, acceleration, toggle switch, general or other functions
- Battery voltage warning device cuts power during low battery condition
Data From The Original Product Sheet
| Model | F24-10S |
|---|---|
| Configuration | 1 transmitter with 1 receiver |
| Speed | Single speed |
| Function buttons | 10 |
| Control distance | Up to 100 m |
| Channels | 80 |
| Control motions | 11 |
| Unique ID codes | Over 4.3 billion |
| Enclosure protection | IP65 |
| Working temperature | -35 C to +85 C |
| Transmitter voltage | DC3V |
| Receiver power | AC380V / 220V / 110V / 48V / 36V / 24V / 12V or AC/DC12V |
| Output capacity | Full sealed relay output, 5 A |
| Housing material | Glass fibre |
| Colour | Yellow |
| Warranty | 1 year |
What The Housing And Contacts Are Made Of
- Glass fibre-reinforced nylon housing for impact resistance on industrial shop floors
- Sealed relay contacts rated 5 A so the receiver switches contactor coils directly without external relays
How This Unit Is Made
Step 1
Boards are populated on the SMT line and soldered on the automatic wave soldering machine
Step 2
Transmitter and receiver are paired to a unique ID code and channel before assembly
Step 3
Each set is function tested against the ordered receiver voltage before packing
Step 4
S/N and channel are printed on the back of both units so a replacement can be matched later
What Is Checked Before It Ships
- Raw material through finished product is inspected step by step on the production line
- Working process follows ISO9001:2008
- Every set is powered up and each motion is checked before it leaves the line
- 12 month warranty from delivery
What Can Be Changed On Your Order
- Receiver voltage selected from the listed range at order time
- Button text supplied as arrow tips or as your own English labels
- Two transmitters paired to one receiver, or a spare transmitter added to the set
- Own brand and label printing accepted on OEM orders
How It Compares With The Alternatives
| Wired pendant control station | Radio removes the trailing cable but adds batteries to change and a receiver to wire in; a pendant is cheaper and never needs pairing |
|---|---|
| F24-8D with eight double speed buttons | The 10S adds two more single speed motions; if the machine only has hoist, long travel and cross travel the 8D is the cheaper fit |
| Joystick sets such as F24-60 | Push buttons are faster to train an operator on; a joystick gives proportional control that push buttons cannot |
Getting It Onto The Machine
- Confirm the control voltage on the existing crane panel before ordering the receiver
- Count the motions the machine actually needs, then choose the button count with one spare
- Mount the receiver inside the panel with the 1 m cable running to the contactor terminals
- Watch the transmitter LED: slow red flashing means change the two batteries
- Record the S/N and channel from the back of both units so a lost transmitter can be replaced without changing the receiver
Other Models In This Series
Industries Cases And Guides For This Model
Overhead and Bridge Cranes
Industry application
Electric Hoists and Winches
Industry application
Construction Equipment
Industry application
DC24V F24-12S Truck Wireless Remote Control For An Australian Buyer
Case study
F21-2S Up and Down Remote Control For Chain Hoists
Case study
Four Advantages Of Using A Wireless Controller
Technical guide
How To Choose The Receiver Voltage For A Crane Radio Control
Technical guide
What Does IP65 Mean On A Crane Remote Control
Technical guide
Retrofit A Pendant Crane To Radio Control
Solution
Replace A Lost Or Broken Transmitter
Solution
Catalogue And Datasheets
Download center
Frequently Asked Questions
What is the minimum order quantity?
One set. A single sample is available so you can test it on the machine before committing to volume.
How long is delivery?
Around 2-4 days for a sample order and about 7 days for a small volume order, then 3-8 days by FedEx or DHL.
Which receiver voltage should I order?
Match the control voltage on the crane panel. The receiver is built for AC380V, 220V, 110V, 48V, 36V, 24V, 12V or AC/DC12V, so tell us the panel voltage with the order.
Can I get a replacement transmitter only?
Yes. Send the S/N and CH printed on the back of your receiver and we build a new transmitter on the same channel, so the receiver stays in place.
Will two cranes in the same bay interfere?
Each set is coded with one of over 4.3 billion unique ID codes and runs on 80 channels, so a transmitter only answers its own paired receiver.
Can the button text be changed?
Yes. Arrow tips are standard and your own English button text and brand can be printed on OEM orders.
How is it packed?
One set per box at 46 x 24.4 x 14.8 cm, six sets per carton at 76.3 x 49.3 x 33 cm.
Quote The Eot crane remote control
Send the control voltage on your panel and the motion list. A price, a lead time and the matching receiver build come back the same working day.