Rainbow Magnetic Snap Button
A brass and iron magnetic snap in 14 by 2 mm, 18 by 2 mm, 14 by 4 mm and 18 by 4 mm, finished in rainbow plating. Publishing both diameter and thickness matters on a magnetic snap, because thickness is what decides whether it will hold a structured flap. Minimum 1,000 pieces.
Rainbow finish on a closure, with both diameter and thickness options published.
| Diameter | 14 mm*2 mm/18 mm*2 mm/14*4 mm/18 mm*4 mm |
|---|---|
| Material | Brass and iron |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass |
| Typical Use | Bag/purse |
| Minimum Order | 1000 pcs |
Problems It Solves
- A weak magnet lets the flap gape, which is the single most visible fault on a shelf sample
- Prong plates that are too thin pull through a soft lining after a few hundred openings
- Thickness that was not checked against the flap material makes the closure sit proud
Key Benefits
- Diameter and thickness options so the magnet strength suits the flap weight
- Brass and iron construction with the prong plate sized to spread the pull
- Plated caps in the same colour range as the bag's other trim
Application Scenarios
- Handbag and tote flap closures
- Wallet and card holder closures
- Inner pocket closures where a zip would be too bulky
- Presentation and gift box lids
Who It Is For
- Handbag and wallet factories replacing snap fasteners with a hidden closure
- Leather workshops that fit closures by hand
- Packaging makers needing a magnetic lid catch
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Brass plus iron assembly with a magnetised core
- Diameters of 14 mm and 18 mm with 2 mm and 4 mm thickness options
- Prong and washer sets supplied for punch-and-fold fitting
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Choose the thicker version for a heavy or structured flap
- Always fit a reinforcement layer behind the prong plate
- Test the closure through the finished material thickness, not on bare leather
| Compared with | What changes |
|---|---|
| Metal snap fastener | A snap holds harder but needs two hands and shows a visible cap on the flap face |
| Hook and loop tape | Tape is cheapest but is noisy, collects lint and looks unfinished on a leather bag |
Related Reading
Industries
Solutions
Other Items in Magnetic Snap Buttons
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
Which Thickness Should I Choose
The 2 mm version suits light flaps and wallets, and the 4 mm version suits structured or heavier flaps. Ask for both in the sample set and test them on your own material.
Ask for a Sample of the Rainbow Magnetic Snap Button
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.