Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table belongs to the coffee table family and is produced on the same steel-frame line as the rest of the range. The metal structure is made in the factory's own press and welding shops, then coated on the line shown in the workshop photographs on this site. The typical buyer is o filling a living room bay with a fixed specification.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Glass, MDF or melamine tops
Top material is chosen per price point without changing the frame tooling.
Nesting sets ship efficiently
Nested sets cut CBM per selling unit, which matters when the freight rate is the difference between a viable programme and a dead one.
Round, rectangular and nesting formats
One supplier covers the shapes a living room bay needs, so the range reads as a family instead of a collection of one-offs.
What This Model Is Specified Against
The problems below are the ones that turn a coffee table order into a customer-service case. Each one is a build decision on this model.
- Glass breakage in transitTempered glass tops ship in a separate protected compartment with edge protection, packed to the drawing agreed for that model.
- Weld and coating defects that show on a glossy topWeld points are placed under the top rail where possible and dressed before coating.
- Tops that rock on an uneven floorLevelling feet are specified on the models that need them, and the frame is checked flat on a jig before the top is fitted.
Where It Gets Used
Online marketplaces
Single-carton tables sized for parcel networks.
Café and lounge areas
Low tables for informal seating zones.
Serviced apartments and rentals
Hard-wearing tables that are cheap to replace.
Living room retail ranges
Core price-point tables for a seasonal bay.
Buyers Who Specify It
- Importers building an assorted occasional-table container
- Online furniture sellers needing parcel-safe cartons
- Chain retail buyers refreshing a living room bay
- Hospitality fit-out buyers replacing lounge tables
Construction
- Powder-coated steel tube frames in black, white, gold and bronze finishes
- Tempered glass, MDF or melamine-faced tops
- Round, square, rectangular and nesting formats
- Knock-down frames with a numbered hardware pack
- Levelling feet on selected models
What We Can Confirm
| Product name | Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table |
|---|---|
| Category | Coffee Table |
| Minimum order quantity | 100 pieces per model |
| Design style | Modern |
| Colour | Customized |
| Size | Customized |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table is fixed per the drawing and held for the life of the order.
Assembly and Care
- Check the carton for transit damage before opening it, and photograph anything visible.
- Sort the hardware pack into its numbered groups before you start.
- Follow the assembly order given — the sequence exists because some fixings become unreachable later.
- Use the anchor point where one is supplied, especially on taller units.
- Avoid dragging the assembled unit across a floor; lift it to move it.
Other Models in This Range
Coffee Table
A60019
View model
Coffee Table
A60018
View model
Coffee Table
A60006
View model
Coffee Table
A60005
View model Buyer programmes
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
MDF Melamine and Tempered Glass Tops Compared
Choosing the surface that sits on the frame, and what each one costs you in freight and returns.
A Private-Label Furniture Development Checklist
Fourteen things to settle in writing before a private-label furniture programme goes into production.
Questions About This Model
What is the lead time for Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Can we get a sample of Low Height Wood Furniture Coffee Table Square of Living Room MDF Multifunction Coffee Table before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Do the tables ship assembled?
Most ship knocked down. The top, frame and hardware go in one carton unless the model has a glass top that needs a separate compartment.
What glass thickness do you use on glass-top tables?
Glass thickness is set per model and confirmed on the specification sheet at quotation. It is not published in the catalogue because it changes with the top size.
Is the MOQ per model or per colour?
The 100-piece MOQ on the newer models is per model per colour. A mixed-colour order is quoted separately.
Quote Low Height Wood Furniture Coffee Table Square of Living Room
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.