H60026
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
H60026 sits in the dining cart section of the Wanhao catalogue and is built to order for export programmes. The metal structure is made in the factory's own press and welding shops, then coated on the line shown in the workshop photographs on this site. It fits programmes run by d where consistency between shipments matters more than novelty.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Bright colour options
Strong end-cap merchandising in a low-cost category.
Flat pack with a short assembly
Frame, trays, castors, hardware pack.
2 and 3 tier formats
Two price points from the same frame family.
What This Model Is Specified Against
Three things go wrong with dining cart in a volume programme. Here is how H60026 is built against them.
- Colour fading on bright finishesCoating spec for bright colours is confirmed per model at quotation.
- Castors that break off under loadCastor type and the fixing into the frame are specified per model against the loaded weight.
- Trays that rattle in transitTray-to-frame fixing is set so the cart is quiet in use and stable in the carton.
Where It Gets Used
Café back-of-house
Service and clearing trolleys.
Craft and home office
Mobile supply storage.
Bathroom and laundry
Compact rolling storage.
Kitchen storage
Vegetables, jars and small appliances.
Buyers Who Specify It
- Home-organisation brands
- Discount and variety retail buyers
- Café and hotel back-of-house buyers
- E-commerce sellers in kitchen storage
Construction
- Powder-coated steel tube frames
- 2 and 3 tier tray configurations
- Four castors, usually two braked
- Handle bar on selected models
- Flat-pack carton
What We Can Confirm
| Model code | H60026 |
|---|---|
| Product name | H60026 |
| Category | Dining Cart |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. H60026 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on H60026 is fixed per the drawing and held for the life of the order.
Assembly and Care
- Unpack on the carton itself so the finished surfaces never touch the floor.
- Check the parts against the parts list before you start; a missing fixing is easier to report before assembly than during it.
- Assemble on a flat surface and leave every fixing finger-tight until the last one is in place.
- Tighten in sequence, then stand the unit up and adjust the feet against the floor.
- Wipe coated surfaces with a damp cloth only; solvent cleaners will dull a powder-coated finish.
Other Models in This Range
Dining Cart
H60009
View model
Dining Cart
H60004
View model
Dining Cart
H60007
View model
Dining Cart
H60008
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Capabilities
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
Related guides
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Flat-Pack Carton Design and Why It Drives Your Damage Rate
The carton is not packaging. On a flat-pack furniture programme it is half the product.
Questions About This Model
Can you produce H60026 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
How is H60026 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
How long does assembly take?
Most trolleys assemble from a frame, trays, castors and a hardware pack. Exact part count is on the instruction sheet for the model.
What load does a tier take?
Tier load is confirmed per model. It depends on the tray material and the frame gauge.
Do the trays lift out?
Removable and fixed trays both exist in the range. The product page shows the model supplied.
Quote H60026
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.