H60009
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
H60009 is produced at Wanhao's plant in Zhangzhou as part of the dining cart range. The product is built to a fixed drawing so that a second production run reproduces the first, including the hardware pack. It is quoted mainly to d who need one factory to cover a whole product family.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Flat pack with a short assembly
Frame, trays, castors, hardware pack.
2 and 3 tier formats
Two price points from the same frame family.
Bright colour options
Strong end-cap merchandising in a low-cost category.
What This Model Is Specified Against
Three things go wrong with dining cart in a volume programme. Here is how H60009 is built against them.
- Castors that break off under loadCastor type and the fixing into the frame are specified per model against the loaded weight.
- Trays that rattle in transitTray-to-frame fixing is set so the cart is quiet in use and stable in the carton.
- Colour fading on bright finishesCoating spec for bright colours is confirmed per model at quotation.
Where It Gets Used
Bathroom and laundry
Compact rolling storage.
Kitchen storage
Vegetables, jars and small appliances.
Café back-of-house
Service and clearing trolleys.
Craft and home office
Mobile supply storage.
Buyers Who Specify It
- Home-organisation brands
- Discount and variety retail buyers
- Café and hotel back-of-house buyers
- E-commerce sellers in kitchen storage
Construction
- Powder-coated steel tube frames
- 2 and 3 tier tray configurations
- Four castors, usually two braked
- Handle bar on selected models
- Flat-pack carton
What We Can Confirm
| Model code | H60009 |
|---|---|
| Product name | H60009 |
| Category | Dining Cart |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on H60009 is specified against the export route the order actually takes.
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. H60009 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Assembly and Care
- Check the carton for transit damage before opening it, and photograph anything visible.
- Sort the hardware pack into its numbered groups before you start.
- Follow the assembly order given — the sequence exists because some fixings become unreachable later.
- Use the anchor point where one is supplied, especially on taller units.
- Avoid dragging the assembled unit across a floor; lift it to move it.
Other Models in This Range
Dining Cart
H60010
View model
Dining Cart
H60004
View model
Dining Cart
H60007
View model
Dining Cart
H60008
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Capabilities
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Related guides
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Flat-Pack Carton Design and Why It Drives Your Damage Rate
The carton is not packaging. On a flat-pack furniture programme it is half the product.
Questions About This Model
Can we get a sample of H60009 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Are the castors lockable?
Braked castors are fitted on most models. Confirm the castor specification per model at quotation.
Can we get the trolley in our brand colour?
Yes, on models marked Color: Customized, subject to the quantity supporting a coating batch.
How long does assembly take?
Most trolleys assemble from a frame, trays, castors and a hardware pack. Exact part count is on the instruction sheet for the model.
Quote H60009
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.