H60021
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Wanhao builds H60021 as a dining cart for buyers sourcing a dining range from a single factory. The product is built to a fixed drawing so that a second production run reproduces the first, including the hardware pack. It fits programmes run by e where consistency between shipments matters more than novelty.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Flat pack with a short assembly
Frame, trays, castors, hardware pack.
2 and 3 tier formats
Two price points from the same frame family.
Bright colour options
Strong end-cap merchandising in a low-cost category.
What This Model Is Specified Against
Every point below is a decision taken before production on H60021, not a check added afterwards.
- Colour fading on bright finishesCoating spec for bright colours is confirmed per model at quotation.
- Castors that break off under loadCastor type and the fixing into the frame are specified per model against the loaded weight.
- Trays that rattle in transitTray-to-frame fixing is set so the cart is quiet in use and stable in the carton.
Where It Gets Used
Bathroom and laundry
Compact rolling storage.
Kitchen storage
Vegetables, jars and small appliances.
Café back-of-house
Service and clearing trolleys.
Craft and home office
Mobile supply storage.
Buyers Who Specify It
- Discount and variety retail buyers
- Café and hotel back-of-house buyers
- E-commerce sellers in kitchen storage
- Home-organisation brands
Construction
- Powder-coated steel tube frames
- 2 and 3 tier tray configurations
- Four castors, usually two braked
- Handle bar on selected models
- Flat-pack carton
What We Can Confirm
| Model code | H60021 |
|---|---|
| Product name | H60021 |
| Category | Dining Cart |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a shelf product from a trading company
A trading company sells what a factory already made. H60021 can be modified in colour and size where the model allows it, because the quote comes from the plant that builds it.
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on H60021 is specified against the export route the order actually takes.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Dining Cart
H60009
View model
Dining Cart
H60004
View model
Dining Cart
H60007
View model
Dining Cart
H60008
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Capabilities
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
Related guides
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Flat-Pack Carton Design and Why It Drives Your Damage Rate
The carton is not packaging. On a flat-pack furniture programme it is half the product.
Questions About This Model
Is H60021 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
Can you produce H60021 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
Are the castors lockable?
Braked castors are fitted on most models. Confirm the castor specification per model at quotation.
Can we get the trolley in our brand colour?
Yes, on models marked Color: Customized, subject to the quantity supporting a coating batch.
How long does assembly take?
Most trolleys assemble from a frame, trays, castors and a hardware pack. Exact part count is on the instruction sheet for the model.
Quote H60021
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.