G60032
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
G60032 belongs to the bar set family and is produced on the same steel-frame line as the rest of the range. The metal structure is made in the factory's own press and welding shops, then coated on the line shown in the workshop photographs on this site. It is quoted mainly to i who need one factory to cover a whole product family.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Tables and stools as a set
Matched height and finish out of one order.
Fixed and swivel stools
Two price tiers on the same frame family.
Compact footprint
Designed for kitchen islands and small dining corners.
What This Model Is Specified Against
Every point below is a decision taken before production on G60032, not a check added afterwards.
- High tables that tip when leaned onBase plate size and weight are specified per model against the table height.
- Stool footrests that bendFootrest ring gauge and its fixing to the legs are specified for the load a footrest actually sees.
- Swivel mechanisms that seizeMechanism type is fixed per model and the supplier is held for the life of the order.
Where It Gets Used
Small-apartment dining
Where a full dining table does not fit.
Retail and showroom counters
Customer seating at a service counter.
Cafés and bars
Seating that cleans quickly and stacks where the model allows.
Kitchen islands and breakfast bars
Counter and bar height stools.
Buyers Who Specify It
- E-commerce sellers targeting small apartments
- Café and bar fit-out buyers
- Retail buyers in kitchen and dining
- Importers supplying hospitality wholesalers
Construction
- Powder-coated steel tube frames
- Bar and counter heights
- Fixed, swivel and adjustable stool formats
- Footrest ring on stool models
- Weighted or wide base plates on high tables
What We Can Confirm
| Model code | G60032 |
|---|---|
| Product name | G60032 |
| Category | Bar Set |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. G60032 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. G60032 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Bar Set
G60023
View model
Bar Set
G60024
View model
Bar Set
G60026
View model
Bar Set
G60022
View model Buyer programmes
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Related guides
A Dining Set Buying Guide for Retail Buyers
Carton count, assembly time and wobble — the three numbers that decide whether a dining programme works.
Questions About This Model
Is G60032 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
Can you produce G60032 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
What seat heights do you make?
Counter and bar heights are both produced. Confirm the exact seat height per model at quotation.
Can stools be ordered without the table?
Yes. Stools are quoted as their own model.
Do you make a matching bar table in a custom height?
Yes, on models marked Size: Customized. Height changes are confirmed on a sample before production.
Quote G60032
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.