F60106
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
F60106 is produced at Wanhao's plant in Zhangzhou as part of the dining set range. Construction follows the same route as the rest of the range: steel parts cut, formed and coated in house, then matched to the panel, glass or upholstered components before packing. It suits r who need the carton plan and the specification agreed before the price is signed.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Glass, MDF and melamine tops
Several price tiers from one frame family.
One carton plan for the set
Freight and shelf handling both get simpler.
2, 4 and 6 seat formats
Covers apartment through family price points.
What This Model Is Specified Against
A dining set fails in a small number of places. F60106 is specified against those places.
- Long assembly on the customer's floorPart count is kept down and the hardware is numbered to the instruction steps.
- Chairs that do not tuck under the tableSeat height and apron clearance are checked on the sample before production starts.
- Sets arriving with mismatched finishesTable and chairs are coated together when the set is ordered as a set.
Where It Gets Used
Apartment dining
Compact 2 and 4 seat sets.
Staff rooms and break areas
Contract quantities in a project colour.
Cafés and canteens
Wipe-clean tops and stacking chairs.
Family dining ranges
6 seat sets at a promotional price.
Buyers Who Specify It
- Retail buyers running dining promotions
- Contract buyers fitting out canteens
- Importers supplying wholesalers
- E-commerce sellers in the dining category
Construction
- Powder-coated steel tube frames
- Tempered glass, MDF or melamine tops
- 2, 4 and 6 seat configurations
- Levelling feet on table frames
- Set-level carton plan agreed before production
What We Can Confirm
| Model code | F60106 |
|---|---|
| Product name | F60106 |
| Category | Dining Set |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. F60106 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. F60106 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Unpack on the carton itself so the finished surfaces never touch the floor.
- Check the parts against the parts list before you start; a missing fixing is easier to report before assembly than during it.
- Assemble on a flat surface and leave every fixing finger-tight until the last one is in place.
- Tighten in sequence, then stand the unit up and adjust the feet against the floor.
- Wipe coated surfaces with a damp cloth only; solvent cleaners will dull a powder-coated finish.
Other Models in This Range
Dining Set
F60004
View model
Dining Set
F60136
View model
Dining Set
F60005
View model
Dining Set
F60007
View model Buyer programmes
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
MDF Melamine and Tempered Glass Tops Compared
Choosing the surface that sits on the frame, and what each one costs you in freight and returns.
A Dining Set Buying Guide for Retail Buyers
Carton count, assembly time and wobble — the three numbers that decide whether a dining programme works.
Questions About This Model
Can we get a sample of F60106 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Is the set packed in one carton?
Where the model allows it, yes. Larger sets need more than one carton and the plan is confirmed in writing.
What is the table top thickness?
Top thickness is a per-model specification confirmed at quotation.
What is the MOQ for a dining set?
100 sets per model is the published MOQ on the newer models. Older catalogue models are quoted case by case.
Quote F60106
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.