F60042
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
F60042 is produced at Wanhao's plant in Zhangzhou as part of the dining set range. Steel forming, coating and final assembly all happen at the same site, which is what keeps a repeat run matching the first one. It suits e who need the carton plan and the specification agreed before the price is signed.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Glass, MDF and melamine tops
Several price tiers from one frame family.
One carton plan for the set
Freight and shelf handling both get simpler.
2, 4 and 6 seat formats
Covers apartment through family price points.
What This Model Is Specified Against
Every point below is a decision taken before production on F60042, not a check added afterwards.
- Sets arriving with mismatched finishesTable and chairs are coated together when the set is ordered as a set.
- Long assembly on the customer's floorPart count is kept down and the hardware is numbered to the instruction steps.
- Chairs that do not tuck under the tableSeat height and apron clearance are checked on the sample before production starts.
Where It Gets Used
Cafés and canteens
Wipe-clean tops and stacking chairs.
Family dining ranges
6 seat sets at a promotional price.
Apartment dining
Compact 2 and 4 seat sets.
Staff rooms and break areas
Contract quantities in a project colour.
Buyers Who Specify It
- Contract buyers fitting out canteens
- Importers supplying wholesalers
- E-commerce sellers in the dining category
- Retail buyers running dining promotions
Construction
- Powder-coated steel tube frames
- Tempered glass, MDF or melamine tops
- 2, 4 and 6 seat configurations
- Levelling feet on table frames
- Set-level carton plan agreed before production
What We Can Confirm
| Model code | F60042 |
|---|---|
| Product name | F60042 |
| Category | Dining Set |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. F60042 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. F60042 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Dining Set
F60004
View model
Dining Set
F60136
View model
Dining Set
F60005
View model
Dining Set
F60007
View model Buyer programmes
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Related guides
MDF Melamine and Tempered Glass Tops Compared
Choosing the surface that sits on the frame, and what each one costs you in freight and returns.
A Dining Set Buying Guide for Retail Buyers
Carton count, assembly time and wobble — the three numbers that decide whether a dining programme works.
Questions About This Model
How is F60042 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
What is the lead time for F60042?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
What is the table top thickness?
Top thickness is a per-model specification confirmed at quotation.
What is the MOQ for a dining set?
100 sets per model is the published MOQ on the newer models. Older catalogue models are quoted case by case.
Can we buy extra chairs for a set?
Yes, chairs can be ordered as a separate line against the same finish.
Quote F60042
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.