A60081
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
A60081 is produced at Wanhao's plant in Zhangzhou as part of the coffee table range. The frame is fabricated and coated on site, and the non-metal parts are fitted and checked against the frame rather than against a drawing alone. Most enquiries for this model come from h working to a landed-cost target.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Glass, MDF or melamine tops
Top material is chosen per price point without changing the frame tooling.
Nesting sets ship efficiently
Nested sets cut CBM per selling unit, which matters when the freight rate is the difference between a viable programme and a dead one.
Round, rectangular and nesting formats
One supplier covers the shapes a living room bay needs, so the range reads as a family instead of a collection of one-offs.
What This Model Is Specified Against
These are the issues raised most often on coffee table programmes, and the build answer to each.
- Weld and coating defects that show on a glossy topWeld points are placed under the top rail where possible and dressed before coating.
- Tops that rock on an uneven floorLevelling feet are specified on the models that need them, and the frame is checked flat on a jig before the top is fitted.
- Glass breakage in transitTempered glass tops ship in a separate protected compartment with edge protection, packed to the drawing agreed for that model.
Where It Gets Used
Café and lounge areas
Low tables for informal seating zones.
Serviced apartments and rentals
Hard-wearing tables that are cheap to replace.
Living room retail ranges
Core price-point tables for a seasonal bay.
Online marketplaces
Single-carton tables sized for parcel networks.
Buyers Who Specify It
- Chain retail buyers refreshing a living room bay
- Hospitality fit-out buyers replacing lounge tables
- Importers building an assorted occasional-table container
- Online furniture sellers needing parcel-safe cartons
Construction
- Powder-coated steel tube frames in black, white, gold and bronze finishes
- Tempered glass, MDF or melamine-faced tops
- Round, square, rectangular and nesting formats
- Knock-down frames with a numbered hardware pack
- Levelling feet on selected models
What We Can Confirm
| Model code | A60081 |
|---|---|
| Product name | A60081 |
| Category | Coffee Table |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on A60081 is fixed per the drawing and held for the life of the order.
Against buying frame and surface from two suppliers
Splitting the frame and the surface across two factories means two QC standards and a fit problem nobody owns. A60081 is fabricated and fitted in one plant.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Coffee Table
A60019
View model
Coffee Table
A60018
View model
Coffee Table
A60006
View model
Coffee Table
A60005
View model Buyer programmes
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
MDF Melamine and Tempered Glass Tops Compared
Choosing the surface that sits on the frame, and what each one costs you in freight and returns.
A Private-Label Furniture Development Checklist
Fourteen things to settle in writing before a private-label furniture programme goes into production.
Questions About This Model
How is A60081 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
What is the lead time for A60081?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Is the MOQ per model or per colour?
The 100-piece MOQ on the newer models is per model per colour. A mixed-colour order is quoted separately.
Can you print our brand on the carton?
Yes. Carton artwork, barcodes and labels are produced to your artwork file. Send the print-ready file with the order confirmation.
Can we order a nesting set in a custom colour?
Yes, on the models marked Color: Customized. Each table in the set is coated in the same batch so the finish matches across the set.
Quote A60081
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.