- Home
- Products
- Jump And Break Cues
- Factory-supplied high-grade maple 3-section jump and break integrated cue 13.8MM large tip billiard cue
Factory-supplied high-grade maple 3-section jump and break integrated cue 13.8MM large tip billiard cue
13.8 mm tip, one-piece, maple construction, built for American pool play.
Product Overview
Within the three-section jump and break cues on this site, this model is separated out by its own published detail rather than pooled into a family description. The tip diameter is published as 13.8 mm, the cue is one-piece and three-section, the material named on the listing is maple. The same listing offers tip sizes 8.5, 9, 10, 10.5, 11, 12 and 13 mm; materials including purpleheart; 1/2 jointed and 3/4 jointed formats to order, which is the range this model can be built within rather than what this particular item is. The listing states a minimum order quantity of 200 pieces for this line. On the source listing, the listing describes it as held in stock rather than made to order; OEM work is accepted on it, which for this factory means your logo on the packing and the case; it is published as a wholesale and export line. Anything the listing does not publish is marked as such in the specification table below and confirmed by email rather than estimated here.
Key Benefits
- Tip diameter published as 13.8 mm, so it can be matched to your ferrules
- Published as in stock, so it does not wait for a production slot
- Three-section build so one cue covers the break and the jump
- Hard break tip, which is what keeps break energy in the rack
- Takes the hardest shot in the room off your playing cues
- Published as factory-supplied rather than sourced through a trader
At A Glance
- Family
- Jump and break cue
- Category
- Jump And Break Cues
- Product family
- Jump and break cue
- Tip diameter
- 13.8 mm
- Joint format
- One-piece, Three-section
- Material
- Maple
Who It Is For
- Rooms protecting their house cue stock
- Tournament tables needing a dedicated break stick
- Distributors completing a cue range
- Coaches teaching the jump shot
- Retailers selling break cues as an add-on
Problems It Solves
- Playing cues damaged by break shots
- Ferrules split by attempted jump shots
- Break tips too soft to survive a season
- Sections that do not interchange
- No dedicated break cue, so the table takes the damage
Application Scenarios
- One break cue per table
- Exhibition and trick-shot play
- Retail bundles with a playing cue
- Coaching the break and the jump
- Club stock rotation
Technical Features
- Material named on the listing: Maple
- Joint format: One-piece, Three-section
- Tip diameter: 13.8 mm
- Intended play style: American pool, Snooker
- Figures not listed above are not published by the source and are confirmed in writing rather than estimated
Published Specification
Every row below is reproduced from this product's own source listing. Rows shown in italics are figures the listing does not publish; those are confirmed in writing rather than estimated here.
| Product family | Jump and break cue |
| Tip diameter | 13.8 mm |
| Joint format | One-piece, Three-section |
| Material | Maple |
| Game or table style | American pool, Snooker |
| Availability | Published as in stock |
| OEM and private label | Accepted: logo on case and customised packing |
| Weight | Not published on the source listing |
| Length | Not published on the source listing |
| Other tip sizes offered on this listing | 8.5, 9, 10, 10.5, 11, 12 and 13 mm |
| Other joint formats offered | 1/2 jointed, 3/4 jointed |
| Other materials offered | Purpleheart |
| Minimum order quantity | 200 pieces, as stated on the source listing |
| Lead time | Not published on the source listing |
Use Guide
- Keep it visually distinct from the playing rack
- Do not re-tip it with a soft playing tip
- Check the section joints stay tight through a season of breaks
- Confirm your house rules allow jump shots before buying per table
- Store it with the playing cues, away from damp
Quality Control
- Full QC before shipment, per the quality control system published on the source FAQ
- Sample approved before the production run, so the shipment has a reference
- Full refund or new replacement in the case of bad quality, as published by the source
- Specification reproduced from the source listing, with unpublished figures marked rather than estimated
- Reorders quoted against the same product page so the item does not drift
Materials
- Named on the source listing: Maple
- Material substitutions are raised before production rather than after arrival
- Where a material matters to your market, confirm it in writing with the order
Manufacturing Process
- Maple selected for the three-section build
- Sections turned and joints machined to interchange
- Hard break tip fitted to the published diameter
- Assembly checked at both full and shortened length
- Finished and marked
- Inspected and packed
Certification And Documents
The source site publishes no certification scheme or certificate number for this range, so none is claimed here. The company profile describes supply chain management aimed at meeting the regulations of the destination country, and the documents a specific shipment needs are confirmed per order rather than posted publicly.
Customisation Options
- Logo printed on the case and the packing, per the source FAQ
- Packing customised to retail, counter or bulk supply
- Colour options where the product publishes them
- Sample produced and approved before the production run
- Low minimum order quantity, with sample orders accepted
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.
| Against an item bought on a photograph | This page publishes the diameter, the format and the material the source listing carries, and marks the rows it does not. A photograph publishes none of them, which is where most billiards sourcing goes wrong. |
| Against sourcing through a trading company | The source FAQ states plainly that this is the real manufacturer, with the Taishan address published and visitors welcome, so specification changes are settled with the people who make the goods. |
| Against another product in this range | See the Jump And Break Cues page for the full family and the related products below for the nearest alternatives, each with its own published figures. |
Factory-supplied high-grade maple 3-section jump and break integrated cue 13.8MM large tip billiard cue Questions
Does this cue jump as well as break?
What tip does it carry?
Should it be re-tipped with a normal playing tip?
Can a room order one per table?
Products Buyers Shortlist Alongside This One
Factory wholesale ready-to-ship high-grade maple 1/2 split 3-section jump cue integrated big head billiard cue
Large tip, 1/2 jointed, maple construction, built for American pool play.
See the specification
Factory direct sales in-stock 3-section push-jump integrated cue stick large head cue 13.8MM high-grade maple large head billiard cue
13.8 mm tip, one-piece, maple construction, built for American pool play.
See the specification
Factory Direct Bili 18A PRO Oil Based Billiard Cue Chalk 9pcs Box – Professional Pool Cue Tip Chalk for Snooker & Pool
Grade 18A, oil-based, packed 9 per box.
See the specificationGuides That Cover This Product
Where It Has Been Installed
Request Factory-supplied high-grade maple 3-section jump and break integrated cue 13.8MM large tip billiard cue
Send the quantity, whether it is a sample or a bulk order, the destination country and whether you need your own logo. A quotation comes back by email.