British-style single-joint four-tip water-mark fiberglass integrated billiard cue 10MM small tip standard for billiard halls
10 mm tip, one-piece, fibreglass construction, built for English play.
Product Overview
Among the American and Chinese style playing cues made in Taishan, this one is distinguished by the figures below rather than by a grade name. The tip diameter is published as 10 mm, the cue is one-piece, the material named on the listing is fibreglass. The same listing offers tip sizes 8.5, 9, 10.5, 11, 12 and 13 mm; 1/2 jointed and 3/4 jointed formats to order, which is the range this model can be built within rather than what this particular item is. The listing states a minimum order quantity of 300 pieces for this line. On the source listing, the listing describes it as held in stock rather than made to order; OEM work is accepted on it, which for this factory means your logo on the packing and the case; it is published as a wholesale and export line. Anything the listing does not publish is marked as such in the specification table below and confirmed by email rather than estimated here.
Key Benefits
- Tip diameter published as 10 mm, so it can be matched to your ferrules
- Published as in stock, so it does not wait for a production slot
- Ordered against a published tip diameter rather than against a photograph
- Joint format stated, so halves and spares can be matched later
- Forearm material named instead of described as premium hardwood
- Sample available before a bulk order commits
At A Glance
- Family
- Pool cue
- Category
- Pool Cues
- Product family
- Pool cue
- Tip diameter
- 10 mm
- Joint format
- One-piece
- Material
- Fibreglass
Who It Is For
- Pool halls buying house cues in quantity
- Distributors building a graded range
- Brand owners specifying their own colourway
- E-commerce sellers who need one clear specification
- Players buying a private cue
Problems It Solves
- Cues ordered by photograph arrive in the wrong tip diameter
- Halves that do not interchange across a batch of the same model
- Warped shafts in rooms where humidity swings
- House cues destroyed by being used to break
- A reorder that quietly differs from the first order
Application Scenarios
- House cue racks in a commercial room
- Retail shelves needing a printed spec
- Member cues in a locked rack
- Academy sets matched across students
- Mixed export container loads
Technical Features
- Material named on the listing: Fibreglass
- Joint format: One-piece
- Tip diameter: 10 mm
- Intended play style: English
- Figures not listed above are not published by the source and are confirmed in writing rather than estimated
Published Specification
Every row below is reproduced from this product's own source listing. Rows shown in italics are figures the listing does not publish; those are confirmed in writing rather than estimated here.
| Product family | Pool cue |
| Tip diameter | 10 mm |
| Joint format | One-piece |
| Material | Fibreglass |
| Game or table style | English |
| Availability | Published as in stock |
| OEM and private label | Accepted: logo on case and customised packing |
| Weight | Not published on the source listing |
| Length | Not published on the source listing |
| Other tip sizes offered on this listing | 8.5, 9, 10.5, 11, 12 and 13 mm |
| Other joint formats offered | 1/2 jointed, 3/4 jointed |
| Minimum order quantity | 300 pieces, as stated on the source listing |
| Lead time | Not published on the source listing |
Use Guide
- Match the tip diameter to the ferrules already in your rack before ordering
- Store cues away from external walls, direct sun and air-conditioning outlets
- Keep a dedicated break cue at each table so playing cues are not used to break
- Re-tip before the tip flattens past the ferrule edge
- Record the product page you ordered against so the reorder matches
Quality Control
- Full QC before shipment, per the quality control system published on the source FAQ
- Sample approved before the production run, so the shipment has a reference
- Full refund or new replacement in the case of bad quality, as published by the source
- Specification reproduced from the source listing, with unpublished figures marked rather than estimated
- Reorders quoted against the same product page so the item does not drift
Materials
- Named on the source listing: Fibreglass
- Material substitutions are raised before production rather than after arrival
- Where a material matters to your market, confirm it in writing with the order
Manufacturing Process
- Timber or composite selected against the published material
- Shaft turned and tapered to the model's profile
- Joint machined so halves interchange within the model
- Ferrule fitted and the tip set to the published diameter
- Wrap, inlay and finish applied
- Inspected and packed for the destination
Certification And Documents
The source site publishes no certification scheme or certificate number for this range, so none is claimed here. The company profile describes supply chain management aimed at meeting the regulations of the destination country, and the documents a specific shipment needs are confirmed per order rather than posted publicly.
Customisation Options
- Logo printed on the case and the packing, per the source FAQ
- Packing customised to retail, counter or bulk supply
- Colour options where the product publishes them
- Sample produced and approved before the production run
- Low minimum order quantity, with sample orders accepted
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.
| Against an item bought on a photograph | This page publishes the diameter, the format and the material the source listing carries, and marks the rows it does not. A photograph publishes none of them, which is where most billiards sourcing goes wrong. |
| Against sourcing through a trading company | The source FAQ states plainly that this is the real manufacturer, with the Taishan address published and visitors welcome, so specification changes are settled with the people who make the goods. |
| Against another product in this range | See the Pool Cues page for the full family and the related products below for the nearest alternatives, each with its own published figures. |
British-style single-joint four-tip water-mark fiberglass integrated billiard cue 10MM small tip standard for billiard halls Questions
What tip diameter does this cue carry?
How does it separate for transport?
Can it be supplied with our logo?
What weight is it?
Products Buyers Shortlist Alongside This One
Factory direct sale 1/2 billiard cue 13mm large tip professional American pool cue
13 mm tip, 1/2 jointed, built for American pool play.
See the specification
Factory Direct Sale Chinese-style Carbon Billiard Cue, American Nine-Ball Small Tip, Medium Tip, Large Tip Integrated Cue Stick
Large tip, one-piece, carbon composite construction, built for American pool play.
See the specification
Factory direct sale 1/2 billiard cue small tip medium tip professional American snooker new model
Small tip, 1/2 jointed, built for American pool play.
See the specificationGuides That Cover This Product
Where It Has Been Installed
Request British-style single-joint four-tip water-mark fiberglass integrated billiard cue 10MM small tip standard for billiard halls
Send the quantity, whether it is a sample or a bulk order, the destination country and whether you need your own logo. A quotation comes back by email.