Stainless Steel Coil and Sheet
Cold rolled hot rolled and copper coated stainless coil in 200 to 400 series
What Stainless Steel Coil and Sheet Is and Who It Is For
Stainless coil and sheet are supplied cold rolled, hot rolled and copper coated, in the 200 to 400 series to ASTM, JIS and EN standards. The surface finish is the part of the order that decides the application, so the finish is specified on the order alongside the grade and the thickness.
Key Benefits
- Full finish range from mill 2B through to 8K mirror and decorative textures
- Standards to ASTM, JIS and EN so the certificate matches your specification
- Established mill origins including POSCO, Tisco, BaoSteel, Jisco, LISCO and Tsingshan
- Coil, sheet, tube and custom profiles from the same supplier
| Surface treatment | 2B, BA, NO.1, NO.3, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sand blast, satin brush, etching, vibration |
|---|---|
| Standard grade | ASTM, JIS, EN, 200 to 400 series |
| Origin | POSCO, Tisco, BaoSteel, Jisco, LISCO, Tianhao, Tsingshan |
| 2B finish | cold rolled, heat treated, pickled and finally cold rolled to give appropriate lustre; used for medical equipment, food industry, construction material and kitchen utensils |
| BA finish | bright heat treatment after cold rolling; used for kitchen utensils, electric equipment and building construction |
| NO.3 finish | polished with No.100 to No.120 abrasives to JIS R6001; used for kitchen utensils and building construction |
| NO.4 finish | polished with No.150 to No.180 abrasives to JIS R6001; used for kitchen utensils, building construction and medical equipment |
| HL finish | polished to give continuous polishing streaks using abrasive of suitable grain size; used for building construction |
| NO.1 finish | heat treated and pickled after hot rolling; used for chemical tanks and pipe |
Who It Is For
- Fabricators buying coil for cutting and forming
- Building product manufacturers
- Kitchen and food equipment makers
- Traders sourcing mill certified stainless
Problems It Solves
- The wrong surface finish fails inspection after the part is already formed
- Certificates that do not match the specified standard hold up customs and QA
- Sourcing coil, tube and profiles from three suppliers triples the paperwork
Technical Features
- Cold rolled, hot rolled and copper coated coil
- Surface finishes 2B, BA, NO.1, NO.3, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sand blast, satin brush, etching and vibration
- 200 to 400 series grades
- Mill origin stated on the order
Where Stainless Steel Coil and Sheet Is Used
Kitchen utensils and food industry equipment
Kitchen utensils and food industry equipment
Building construction cladding and trim
Building construction cladding and trim
Medical equipment components
Medical equipment components
Chemical tanks and pipe in NO.1 finish
Chemical tanks and pipe in NO.1 finish
Materials
- 200 series stainless
- 300 series stainless
- 400 series stainless
Quality Control
- Finish checked against the specified designation before shipment
- Mill certificates supplied with each coil
- Thickness and width verified on receipt
Customization Options
- Coil or cut sheet
- Any finish from the standard list
- Protective film on polished finishes
How We Make It
Grade
Grade, thickness and finish confirmation
Mill selection
Mill selection and order placement
Cutting
Cutting to sheet where required
Packing
Packing with protective film
Documentation
Documentation and shipment
How It Compares
2B is the general purpose cold rolled finish. BA and 8K mirror are chosen where appearance matters, NO.4 and HL where a directional finish hides handling marks, NO.1 where the surface will be in chemical service.
Use Guide
- Specify grade, thickness, width and finish designation together
- Say whether protective film is required for polished finishes
- Confirm the standard, ASTM, JIS or EN, that the certificate must reference
Often Ordered Together
Stainless Steel Tube and Pipe
Stainless tube and pipe supplied with the coil and profile programme
View details
Stainless Steel Special Profiles
Custom stainless sections drawn from CAD or SolidWorks drawings
View details
Filter Press Stainless Profiles
SUS304 profile sets drawn for filter press plates and frames
View detailsWhere To Read More
Questions Buyers Ask About Stainless Steel Coil and Sheet
Which surface finishes can you supply?
2B, BA, NO.1, NO.3, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sand blast, satin brush, etching and vibration.
Which standards and series do you cover?
ASTM, JIS and EN in the 200 to 400 series.
Which mills do you source from?
POSCO, Tisco, BaoSteel, Jisco, LISCO, Tianhao and Tsingshan among others.
Get a Quote for Stainless Steel Coil and Sheet
Send the drawing, the quantity and the delivery condition you need. We reply with price, lead time and a sample plan.