Giant Ant
Giant ant sculptures are forged from 304 stainless steel into large-scale animal forms that stand as architectural...
View Details
Stainless Steel Sculpture
Super Diamond
The Super Diamond is a stainless steel sculpture formed from 304 stainless steel plate and polished to a mirror finish. It is designed to be installed as a standalone feature in public or private spaces, where its reflective surface captures light and surroundings, creating a dynamic visual effect that changes with the time of day and viewer position. The sculpture is built to the buyer's drawing, allowing for custom size and placement in a project layout.
| Material | Stainless steel, 304 as standard |
|---|---|
| Forming | Hand forged and welded from plate |
| Standard Finish | Mirror polish |
| Alternative Finishes | Brushed satin, colour electroplating, baked lacquer |
| Typical Use | Public plaza, hotel entrance, shopping mall, exhibition hall |
| Sizes | Built to the buyer layout drawing |
| Category | Stainless Steel Sculpture |
| Made In | Pingshan District, Shenzhen, China |
Key Benefits
- Mirror polished 304 stainless steel reflects light and surroundings, making the sculpture dynamic under different conditions
- Forged from plate rather than cast, so large pieces remain light enough for on-site handling without heavy equipment
- Closed form with no sharp edges, suitable for public spaces including parks and commercial entrances
- Resists rust and weathering in outdoor environments, ideal for permanent installations
- Custom size and shape built to the buyer's layout drawing, avoiding mismatch with site plans
Application Scenarios
- Public plaza or city square as a central feature that draws attention and reflects the sky and passing people
- Hotel lobby or reception area where a reflective sculpture enhances the interior atmosphere
- Shopping mall atrium or entrance where the sculpture acts as a landmark and visual anchor
- Corporate headquarters courtyard or entrance where a bold metal form supports branding
- Exhibition hall or art gallery setting where the sculpture functions as a focal point
Who It Is For
- Landscape architects specifying sculptural features for public plazas and urban spaces
- Hotel and resort buyers sourcing permanent interior or exterior decoration
- Property developers installing signature art pieces in show gardens and entrance zones
- Art consultants commissioning site-specific sculptures for public or private projects
- Municipal or urban design teams integrating art into city infrastructure
Problems It Solves
- Standard catalogue sculptures often do not match the scale or placement in a site layout, leading to gaps or misalignment
- Painted or coated metal sculptures degrade outdoors, requiring replacement or maintenance
- Solid cast metal pieces are too heavy for on-site handling and require cranes or special transport
- Natural stone or resin imitations cannot achieve a mirror finish or withstand outdoor exposure
- Fixed-size sculptures limit design flexibility when integrating into a detailed architectural or landscape plan
Technical Features
- Body forged and welded from 304 stainless steel plate, then ground and mirror polished
- Seamless appearance with weld lines dressed back before the final polish
- Hollow construction reduces weight while maintaining structural integrity
- Fixing detail adapted to site conditions such as paving, ground, or wall mounting
- Finish options include mirror polish, brushed satin, colour electroplating, and baked lacquer
Materials
- 304 stainless steel plate for the forged body and fixing components
- Stainless steel welding consumables matched to the parent plate to maintain finish consistency
Quality Control
- Formed shape checked against the approved drawing before welding
- Weld seams inspected and dressed until they disappear under the polish
- Polished surface checked under light for grinding marks and orange peel
- Protective film applied to every polished face before crating
Customization Options
- Any size and any number of pieces built to your layout drawing
- Mirror, brushed, colour plated or baked lacquer finish per piece or per cluster
- Fixing detail adapted to paving, ground, wall, or shallow water installation
- Sample piece produced for approval before full production begins
Use Guide
- Send the project layout drawing with the intended size and location marked
- Confirm whether the sculpture will be placed on paving, ground, wall, or in water, as the fixing detail varies
- Leave the protective film in place until all surrounding site work is complete
- Clean with water and a soft cloth; avoid abrasive pads on the mirror surface
- Re-polish locally if a scratch occurs during installation rather than replacing the piece
Manufacturing Process
How This Piece Is Made
- Review of the project layout drawing and agreement on the sculpture size and placement
- Plate forming data calculated for each section before any steel is cut
- Hand forging of the plate into the diamond shape with precise curvature
- Welding of the closed body and dressing back of the weld lines
- Grinding through successive grits followed by mirror polishing
- Fixing detail welded on, protective film applied, and crating for export
Every stage happens in the same workshop in Pingshan, Shenzhen, which is why a set of pieces arrives matching.
Comparison
How It Compares With the Alternatives
Compared with Natural stone diamond sculptureStone is heavier and harder to transport and install; cannot achieve a mirror finish
Compared with Cast copper diamondCopper develops a patina over time, which may not suit a modern design; heavier and more expensive
Compared with Painted carbon steel sculpturePainted steel is cheaper but chips and rusts outdoors; requires ongoing maintenance
Compared with Resin imitation diamondResin is light and low cost but fades under UV exposure and cannot be mirror polished
Where This Piece Is Used
Urban Public Art and LandscapeApplication notesCommercial Property and RetailApplication notesDesigners and Art ConsultantsApplication notesMountain and Wolves Landscape InstallationProject notesForged Stainless Steel Giant MushroomsProject notesChoosing Stainless Steel for Outdoor SculptureMaterial GuideFrom Drawing to Installed SculptureProcess GuideMaintaining Outdoor Metal SculptureMaintenance Guide
Related
More From Stainless Steel Sculpture
Panda Sculpture
The stainless steel panda sculpture is forged from 304 stainless steel into a large-scale animal form with a mirror...
View Details
Water Drops and Flowers Combination
Stainless steel sculpture combining water droplets and water flowers is forged from 304 stainless steel plate and...
View Details
Creative Ornaments
Creative ornaments are custom metal sculptures developed from 304 stainless steel, cast copper and brass, and wrought...
View DetailsFAQ
Super Diamond Questions
What material is the sculpture made from?
It is forged from 304 stainless steel plate and then mirror polished. This material is used because it holds a polish and resists rust in outdoor conditions.
Can you make it in the size on our layout drawing?
Yes. Our technicians calculate the forming data for each steel plate, so the size and curvature follow your drawing exactly.
Can the sculpture be installed in water?
Yes. It can be installed in shallow water features. Let us know the water condition so we can detail the fixing and drainage.
What finishes are available besides mirror polish?
Brushed satin, colour electroplating, and baked lacquer are all available. We produce samples for approval before production.
How are the pieces packed for export?
Polished faces are covered with protective film and the sculpture is crated. We confirm the crating arrangement based on the destination port.
Can we see a sample before the full piece is made?
Yes. One piece can be produced for approval before the full sculpture goes into production.
How do we get a price?
Send the layout drawing or a sketch with size and quantity by email or WhatsApp, and we will provide a quote based on it.
Quote Super Diamond at Your Size
Tell us the size, the quantity and where it will be installed. A drawing or a reference photograph is enough to start.