Water Droplet Sculpture
Water droplet sculptures are forged from 304 stainless steel into abstract forms that suggest the moment of impact or...
View Details
Stainless Steel Sphere
Stainless Steel Dolphin Sculpture
The stainless steel dolphin sculpture is hand forged from 304 stainless steel plate into a dynamic, flowing form that captures the movement and intelligence of the animal. The body is constructed from multiple plates shaped and welded together, then ground and polished to a mirror finish. It is designed to be installed as a standalone feature in public or private landscapes, where its reflective surface interacts with light and surroundings.
| Material | 304 stainless steel |
|---|---|
| Forming | Hand forged and welded from plate |
| Standard Finish | Mirror polish |
| Alternative Finishes | Brushed satin, colour electroplating, baked lacquer |
| Typical Use | Public park, plaza, waterfront, hotel entrance, commercial atrium |
| Sizes | Built to the buyer's drawing at any scale |
| Category | Stainless Steel Sphere |
| Made In | Pingshan District, Shenzhen, China |
Key Benefits
- Hand forged 304 stainless steel body holds a mirror polish that reflects light and environment without fading
- Hollow construction reduces weight compared to solid casting, simplifying site installation
- Seamless appearance after welding and polishing, with no visible joints in the finished form
- Suitable for permanent outdoor installation in parks, plazas and waterfronts without degradation
- Curved form and smooth edges eliminate sharp points, improving safety in public spaces
Application Scenarios
- Public park or waterfront plaza where a sculptural feature adds movement and reflection
- Hotel entrance courtyard or rooftop garden with a modern art statement piece
- Shopping mall atrium or lobby with a large-scale interior sculpture that draws attention
- Residential estate or private garden where a custom animal form becomes a focal point
- Municipal art commission for a public space requiring a durable, low maintenance sculpture
Who It Is For
- Landscape architects specifying sculptural elements for public parks and urban plazas
- Property developers sourcing permanent art features for show gardens and entrance zones
- Hotel and resort buyers needing durable, reflective art for high-traffic outdoor areas
- Municipal art commissioners selecting pieces for public installations with long-term use
- Interior designers integrating large metal art into high-end commercial or residential spaces
Problems It Solves
- Painted or coated metal sculptures degrade under UV and moisture, while polished stainless steel maintains its appearance
- Solid cast sculptures are heavy and require lifting equipment, whereas forged plate is lighter
- Standard catalogue animal sculptures do not match the exact scale or pose needed for a site layout
- Existing animal forms in other materials may not survive long-term exposure to rain and cleaning
- Lack of custom sizing in off-the-shelf sculptures forces compromises in site design
Technical Features
- Body forged and welded from 304 stainless steel plate, then ground and mirror polished
- Weld seams dressed back before final polish to achieve a seamless appearance
- Hollow construction with internal structural support to maintain form and reduce weight
- Base plate or ground spigot detail adapted to site conditions such as paving, lawn or water
- Finish options include mirror polish, brushed satin, colour electroplating and baked lacquer
Materials
- 304 stainless steel plate for the main body and structural components
- Stainless steel welding consumables matched to the parent plate to maintain finish uniformity
Quality Control
- Formed shape checked against the approved drawing before welding begins
- Weld seams inspected and dressed until they are invisible under the final polish
- Polished surface checked under light for grinding marks, orange peel or unevenness
- Protective film applied to every polished face before packing
Customization Options
- Any size and scale to match the buyer's layout drawing or site plan
- Mirror, brushed, colour plated or baked lacquer finish per piece or per cluster
- Fixing detail adapted to installation on paving, lawn, water or embedded in structure
- Sample piece produced for approval before full production starts
Use Guide
- Send the site layout drawing or sketch with the intended size and placement marked
- Confirm whether the sculpture will be on paving, lawn, or in water to determine the fixing detail
- Leave the protective film in place until all surrounding site work is complete
- Clean with water and a soft cloth; avoid abrasive pads or chemicals on the mirror surface
- If a scratch occurs during installation, local re-polishing can restore the surface without replacement
Manufacturing Process
How This Piece Is Made
- Review of the buyer's layout drawing or concept sketch to confirm scale and placement
- Plate forming data calculated for each section before any steel is cut
- Hand forging of individual plates into the dolphin's curved forms
- Welding of the body sections with seam dressing before polishing
- Grinding through successive grits followed by mirror polishing
- Fixing detail welded on, protective film applied, and crating prepared for export
Every stage happens in the same workshop in Pingshan, Shenzhen, which is why a set of pieces arrives matching.
Comparison
How It Compares With the Alternatives
Compared with Cast bronze dolphinCast bronze has a richer look but is heavier and more expensive at this scale
Compared with Painted steel dolphinPainted steel is cheaper but will chip and rust outdoors, requiring maintenance
Compared with Resin dolphin sculptureResin is lighter but fades under sunlight and cannot achieve a mirror finish
Compared with Solid stainless steel castingSolid casting is heavier and more costly; forged plate reduces weight without sacrificing strength
Where This Piece Is Used
Commercial Property and RetailApplication notesUrban Public Art and LandscapeApplication notesExhibition Halls and ShowroomsApplication notesMountain and Wolves Landscape InstallationProject notesForged Stainless Steel Giant MushroomsProject notesMirror Polish Versus Brushed FinishProcess GuidePlanning a Sculpture for a Public PlazaBuying GuideColour Options for Stainless Steel SculptureDesign Guide
Related
More From Stainless Steel Sphere
Abstract Sculpture
Abstract sculptures are developed from the exploration of form and conceptual intent, shaped through hand forging and...
View Details
Laser Engraving Machine
The laser engraving machine is used to mark metal surfaces with precise, permanent details such as text, logos,...
View Details
Copper Craft Eagle
The Copper Craft Eagle is a hand-cast sculpture made from cast copper and brass, shaped to reflect the form and...
View DetailsFAQ
Stainless Steel Dolphin Sculpture Questions
What material is the dolphin made from?
It is hand forged from 304 stainless steel plate, which holds a mirror polish and resists rust and weathering.
Can you make the dolphin in the size we need?
Yes. Our technicians calculate the forming data for each plate, so the size and curvature follow your drawing exactly.
Can the sculpture be installed in water?
Yes. It can be installed in shallow water features. Let us know the water depth and condition so the fixing and drainage can be detailed.
What finishes are available?
Mirror polish is standard. Brushed satin, colour electroplating, and baked lacquer are also available. Samples can be made for approval.
How is the sculpture packed for export?
Polished faces are covered with protective film. The sculpture is crated with internal bracing. We confirm the crating based on the destination port.
Can we see a sample before full production?
Yes. One piece can be produced for approval before the full order is made, which is standard for custom projects.
How do we get a quote?
Send your drawing or sketch with size and quantity by email or WhatsApp. We will provide a quote based on your specifications.
Quote Stainless Steel Dolphin Sculpture at Your Size
Tell us the size, the quantity and where it will be installed. A drawing or a reference photograph is enough to start.