Tractor LED Lights
The SLL-0902-13 is an oval 4 inch LED work light designed for tractors, trucks and construction equipment that operate in dusty, wet or vibration-heavy environments. It delivers 1170 effective lumens from 13 x 1W Osram LEDs, providing broad, even illumination across the work zone instead of a narrow hotspot. The die-cast aluminium housing with UV-resistant polycarbonate lens is sealed to IP68 and rated for -40 to +85 degrees Celsius, so it performs reliably in extreme conditions without fogging or failure. The 9–32V DC operating range supports both 12V and 24V systems, reducing the number of SKUs needed for fleet or OEM use.
- 1170 effective lumens from 13 x 1W Osram LEDs spread evenly across a wide flood beam, improving visibility on the work edge
- IP68 sealing and a durable polycarbonate lens resist water, dust and pressure washing during daily machine cleaning
- Operating range of 9–32V DC allows the same part number to be used on 12V and 24V vehicles, simplifying inventory
- Die-cast aluminium housing with UV-resistant polyester powder coating resists corrosion and fading in direct sunlight
- Overvoltage and overheat protection prevent damage from electrical surges or prolonged high ambient temperatures
Where This Lamp Is Used
- Cab roof and hood lighting on tractors and harvesters during night field operations
- Side and rear work lighting on construction equipment like excavators and loaders
- Auxiliary lighting on utility trucks and service vehicles where vibration and dust are common
- Fleet lighting on 12V and 24V trucks where a single part number reduces stock complexity
- Lighting on machinery used in agricultural or mining environments with high dust and moisture
Who It Is For
- Distributors of vehicle lighting who need one part number to serve both 12V and 24V systems
- Machinery OEMs fitting work lights on production lines and requiring consistent mounting patterns
- Fleet operators replacing halogen lights that fail under vibration or after a few hundred hours
- 4x4 and agricultural accessory brands building a private label work lamp range with consistent performance
- Equipment dealers fitting lights on machines used in harsh outdoor conditions
Problems It Solves
- Halogen work lights burn out quickly under vibration and draw more current than LED alternatives
- Cheap sealed lamps let water in through the cable entry and fog up after a few wash cycles
- Narrow beam lights leave the working edge of the machine dark, increasing risk during night operations
- Lights with narrow voltage ranges require separate SKUs for 12V and 24V fleets, increasing inventory cost
- Unprotected LEDs fail during voltage spikes or overheating in enclosed engine bays
Technical Features
- 13 x 1W Osram LEDs with a real power draw of 13W and a maximum rating of 13W
- Wide flood beam pattern with a 1 lux reading at 50 meters
- Semi-gloss black UV-resistant polyester powder coating over the full housing
- Bare wire lead of 40cm as standard with a Deutsch connector available on request
- Overvoltage and overheat protection built into the circuit board
- Operating window of -40 to +85 degrees Celsius, suitable for extreme climates
- IP68 sealing and a sealed cable entry gland keep water and dust out during pressure washing
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-0902-13 |
|---|---|
| Max Power | 13W |
| Real Power | 13W |
| LED | 13 pcs x 1W Osram |
| Theoretical Lumen | 1300 lm |
| Beam Pattern | Wide Flood |
| 1 Lux Reading | Wide Flood 50 meters |
| Colour Temperature | 6000K |
| Operating Voltage | 9–32V DC |
| Lens Material | Anti-scratch UV resistant polycarbonate |
| Waterproof Rating | IP68 |
| Operating Temperature | -40 to +85 degrees Celsius |
| Electrical Connection | Bare wire 40cm, Deutsch connector available |
| Certification | CE, RoHS |
Materials Used
- Anti-scratch UV resistant polycarbonate lens
- Silicone rubber gasket and sealed cable entry gland
- UV-resistant polyester powder coating
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in semi-gloss black with UV resistance
LED board assembly with Osram emitters
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP68 rating before shipment
- Vibration testing on a vibration test machine to reproduce machine mounted service
- Salt spray corrosion testing on housing coating and stainless bracket
- High and low temperature alternating humidity testing across the -40 to +85 degrees Celsius window
Customisation Options
- Deutsch DT connector instead of the standard 40cm bare wire lead
- Spot beam optics in place of the wide flood pattern
- Private label logo on the housing and printed carton
- Alternative cable length for a specific machine harness
- Mixed cartons combining this lamp with other SUNLITEC models for trial orders
How It Compares With the Alternatives
| Round 4 inch work lamp | The oval body fits better on curved surfaces like tractor hoods and cab roofs |
|---|---|
| Spot beam version of the same lamp | Wide flood covers the near working area evenly while spot reaches further ahead but leaves the machine edges dark |
| Larger 5.5 inch work lamp | Lower output but fits tight spaces where a larger body would interfere with guards or wiring |
How to Fit and Use It
- Leave a drip loop in the 40cm lead so water runs away from the gland rather than into it
- Aim the wide flood beam at the working area close to the machine and use a spot lamp separately for distance
- Clean the PC lens with water and a soft cloth only, since solvents will haze the anti-scratch coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 9 to 32V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is CE and RoHS compliant, which meets basic electrical and environmental safety standards for road use.
Get a Price on Tractor LED Lights
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.