Snowblower Head Replacement Auger Housing in 22 24 28 and 39.4 Inch Widths
The snowblower head is the front clearing assembly of a walk behind or ride on snow blower, supplied here as a replacement part for dealers, service workshops and machine builders who need to get a machine back on a route rather than scrap it. It is offered in four working widths, 22 inch (56cm), 24 inch (60cm), 28 inch (71cm) and 39.4 inch (100cm), with a working depth of 20 inch or 21 inch. The head is made of steel, which is what takes the abuse when the auger meets a kerb edge, a frozen gravel ridge or a buried manhole cover. SONJUN supplies the full accessory range for snow blowers, so a workshop can order heads alongside the other wear parts in the same shipment instead of chasing several suppliers mid season.
- Four working widths from 56cm to 100cm so one supplier covers several machine sizes in your fleet or catalogue
- Steel construction for the part of the machine that takes impact damage from kerbs and buried obstacles
- 20 inch and 21 inch working depth options to match the original head fitted to the machine
- Replacing the head instead of the whole machine keeps a unit earning through the rest of the season
- Ordered together with other snow blower accessories in one consignment, which cuts freight and paperwork per line
- Available for OEM production so machine assemblers can buy the head to their own drawing
Product Gallery
Specifications
| Application | Snow blower |
|---|---|
| Sizes | 22″ (56cm), 24″ (60cm), 28″ (71cm), 39.4″ (100cm) |
| Material | Steel |
| Working Depth | 20″ / 21″ |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Service workshops repairing snow blowers damaged by a hidden kerb or frozen debris mid season
- Rental fleets rebuilding returned machines between hire periods
- Distributors holding a spares stock so a dealer is not waiting on an air shipment in January
- Machine assemblers buying the clearing head as a sub assembly for their own snow blower build
- Municipal depots keeping a spare head on the shelf for the machines on their priority routes
Who It Is For
- Snow equipment distributors and spare parts importers
- Authorised service workshops and repair shops
- Equipment rental and hire fleets
- Machine assemblers and OEM snow blower builders
- Municipal and facility maintenance depots running their own workshop
Problems It Solves
- A damaged clearing head takes the whole machine out of service in the middle of the season when it is worth the most
- Sourcing a matching head width and working depth from a general parts trader usually ends in a wrong fitment
- Buying a replacement machine to fix one bent housing destroys the margin on a rental or service contract
- Split orders across several part suppliers arrive at different times and leave the workshop waiting on one line
- Thin sheet housings deform on first impact and fail again within the same winter
Technical Features
- Steel clearing head assembly for the front of a snow blower
- Working widths of 22 inch (56cm), 24 inch (60cm), 28 inch (71cm) and 39.4 inch (100cm)
- Working depth of 20 inch or 21 inch
- Supplied as part of a full snow blower accessory programme
Materials
- Steel
Quality Control
- Incoming inspection on steel before it reaches the line
- In process checks during forming and welding of the head assembly
- 100% inspection of finished parts before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and decal set
- Head width and working depth selected from the sizes offered to match the machine
- Retail packaging or bulk carton packing to suit the parts channel
How It Compares
Against Replacing the complete snow blower
A new machine ends the season budget for one damaged assembly. Fitting a replacement head returns the same machine to the route at part cost.
Against Generic parts trader head
A trader stocks whatever width came in. Here the head is offered in four defined widths from 56cm to 100cm with 20 or 21 inch working depth, so the fitment is decided before the order ships.
Against Snow sweeper head
The sweeper head uses a rotating brush and sweeps snow aside. The snowblower head takes snow into the machine to be thrown, which suits deeper accumulation.
Use Guide
- Confirm the working width and working depth of the original head before ordering so the replacement matches the machine
- Stop the engine and disconnect the spark plug lead before removing the damaged head
- Check the drive belt or chain and the shaft for damage while the head is off, since the same impact often damages both
- Refit fasteners to the machine manufacturer's torque and turn the assembly by hand before starting
- Grease the shaft and store the machine dry at the end of the season to slow corrosion on the steel housing
Snowblower head Buyer Questions
What sizes of snowblower head do you offer?
Four working widths: 22 inch (56cm), 24 inch (60cm), 28 inch (71cm) and 39.4 inch (100cm), with a working depth of 20 inch or 21 inch.
What is the minimum order quantity?
One 20ft container. Sample orders are also accepted, and a single piece sample order is acceptable if you want to check fitment first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
What material is the head made from?
Steel.
Can you supply the other snow blower parts at the same time?
Yes. We offer all accessories for snow blowers, so heads and other wear parts can be consolidated into one shipment.
Can the part be produced under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour and packaging artwork.
What happens if a part has a quality problem?
Within the warranty period replacement spare parts are supplied free of charge for quality problems. Outside the warranty period spare parts are sold at cost price.
Other Models in Snow Blower Parts
733 Snow blower parts-battery cover
View Specifications →
733 Snow blower parts-universal joint
View Specifications →
733 Snow blower parts-transmission gear
View Specifications →
733 Snow blower parts-transmission shaft
View Specifications →
733 Snow blower parts-cylinder
View Specifications →
733 Snow blower parts-clutch
View Specifications →
Snow blower parts-stay wire
View Specifications →
Loncin engine part-air filter
View Specifications →Guides That Help You Specify This
How to Choose a Snow Thrower for a Commercial Clearing Route
Clearing width, intake height and drive type decide how long a fixed route takes. Here is how to specify a machine against the route rather than against a brochure.
Read the guide →Snow Blower Spare Parts a Pre Season Stocking List
The parts that actually stop a machine mid route are cheap, small and never in stock when they are needed. Stock them in autumn instead.
Read the guide →Request a Quotation for the Snowblower head
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.