733 Series Snow Blower Transmission Shaft Replacement Part
This is the transmission shaft from the 733 series snow blower, supplied as a replacement service part for dealers, workshops and importers who need to get a machine back on its route quickly. The shaft carries engine torque through the drive line to the gearbox and the auger, so a twisted, scored or worn shaft shows up as lost drive, vibration or a joint that will not stay seated. It is a shock load part on a snow machine, because the auger regularly meets a frozen ridge or a buried kerb and the load travels straight back down the shaft. SONJUN supplies the full accessory range for its snow blowers, so the shaft can be ordered together with the universal joint, gear and clutch parts that are usually replaced in the same repair.
- Restores the drive line without replacing the gearbox and auger assembly around it
- Ordered against the 733 series machine so spline and length match the drive line already in the field
- Stocked with the universal joint, gear and clutch that are normally changed in the same job
- Can be added to a machine order so the first season spares kit arrives in the same container
- Free replacement within warranty for quality problems, and at cost price outside warranty
- One supplier behind the whole parts list keeps a mid season repair to a single enquiry
Product Gallery
Specifications
| Part | Transmission shaft |
|---|---|
| Application | 733 series snow blower |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Dealer workshops repairing lost drive or drive line vibration mid season
- Rental fleets rebuilding machines after shock loads from untrained operators
- Importers assembling an opening spares stock behind a first container of machines
- Municipal and facility workshops servicing their own snow equipment in house
- Refurbishing end of season machines before resale
Who It Is For
- Importers and distributors of SONJUN snow blowers
- Authorised dealers and independent service workshops
- Equipment hire and rental companies running their own maintenance
- Municipal and facility maintenance departments
- Spare parts wholesalers supplying the winter equipment trade
Problems It Solves
- A worn or twisted shaft loses drive to the auger and the machine stops clearing when the route is at its busiest
- Replacing the whole drive assembly for one shaft ties up parts budget that should cover several machines
- Shafts matched by eye from a general parts trader rarely line up on spline and length, so the repair does not hold
- Sourcing single parts from several traders means several MOQs, several freight charges and a long wait
- Drive line vibration left unfixed takes out the joint and the bearings next, turning a small part into a large bill
Technical Features
- Transmission shaft for the 733 series snow blower drive line
- Supplied together with the matching universal joint
- Part of the full SONJUN snow blower accessory range
- Ordered against the machine model so fitment is matched to the original build
Quality Control
- Incoming inspection on parts and components before they reach the line
- In process checks during production of the part
- 100% inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding on parts packaging
- Bulk or individually bagged packing to suit a workshop or a retail parts counter
- Packaging and label artwork in the destination market language
How It Compares
Against Unbranded aftermarket shaft
A shaft matched from a photograph often differs on spline or length and the joint will not stay seated. This part is ordered against the 733 machine as built.
Against Replacing the complete drive assembly
Fitting a whole assembly for one shaft costs several times the part price and keeps the machine off the route longer.
Against Buying spares from a separate parts trader
A separate trader means a second MOQ and a second freight charge. Here the shaft ships with the rest of the accessory range on one order.
Use Guide
- Confirm the machine model and drive line layout before ordering the replacement shaft
- Stop the engine and disconnect the spark plug lead before working on the drive line
- Inspect the universal joint and the bearings at the same time, since a worn shaft rarely fails alone
- Refit to the original orientation and turn the drive line by hand to check for free rotation before running under load
- Include the shaft in the pre season inspection along with the joint and gear
733 Snow blower parts-transmission shaft Buyer Questions
What is the minimum order quantity for spare parts?
One 20ft container is the standard MOQ. A sample order of one piece is accepted, and parts can be added to a machine order.
How long is the lead time?
25 to 35 days for one 40HQ container. A sample order ships in 1 to 7 days.
Do you supply the matching universal joint?
Yes. The transmission shaft and universal joint are both in the accessory range and can be ordered together.
What happens if a part fails under warranty?
Within the warranty period, replacement spare parts for quality problems are supplied free of charge. Outside warranty, spare parts are sold at cost price.
Can parts be supplied under our own brand?
Yes. OEM and ODM production is available, including branding and packaging artwork.
What payment terms do you accept?
Western Union, PayPal or T/T, depending on the order quantity.
Which port do you ship from?
Ningbo or Shanghai, whichever gives the better sailing for your destination.
Other Models in Snow Blower Parts
733 Snow blower parts-battery cover
View Specifications →733 Snow blower parts-universal joint
View Specifications →733 Snow blower parts-transmission gear
View Specifications →
733 Snow blower parts-cylinder
View Specifications →
733 Snow blower parts-clutch
View Specifications →
Snow blower parts-stay wire
View Specifications →
Loncin engine part-air filter
View Specifications →
Loncin engine part-carburetor
View Specifications →Guides That Help You Specify This
How to Choose a Snow Thrower for a Commercial Clearing Route
Clearing width, intake height and drive type decide how long a fixed route takes. Here is how to specify a machine against the route rather than against a brochure.
Read the guide →Snow Blower Spare Parts a Pre Season Stocking List
The parts that actually stop a machine mid route are cheap, small and never in stock when they are needed. Stock them in autumn instead.
Read the guide →Request a Quotation for the 733 Snow blower parts-transmission shaft
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.