Snow Sweeper Head Replacement Brush Assembly 80cm to 170cm
The snow sweeper head is the complete front brush assembly of a snow sweeper, supplied as a replacement part for distributors, service workshops and fleet operators who need a damaged or worn out sweeper back on its route. It is offered in seven working widths, from 31.5 inch (80cm) up to 66.9 inch (170cm), with a brush diameter of 14.9 inch or 19.7 inch, and is built from steel and PP, steel for the frame that takes the impacts and PP for the sweeping brush itself. Matching width and brush diameter to the original head is the whole job when ordering a sweeper head, which is why both are specified here rather than left to a guess. SONJUN supplies all accessories for snow sweepers, so a workshop can order heads and the rest of the wear parts in one consignment.
- Seven working widths from 80cm to 170cm so one supplier covers a mixed sweeper fleet or a full catalogue
- Brush diameter offered in 14.9 inch and 19.7 inch so the replacement matches the original head
- Steel frame with PP brush, so impact loads and sweeping contact are handled by the right material each
- Replacing the head returns a damaged sweeper to service instead of writing off the machine mid season
- Ordered with the rest of the sweeper accessory range in one consignment, cutting freight per line
- OEM production available for assemblers building sweepers under their own brand
Product Gallery
Specifications
| Application | Snow sweeper |
|---|---|
| Sizes | 31.5″ (80cm), 41.7″ (106cm), 43.3″ (110cm), 49.2″ (125cm), 51.2″ (130cm), 59″ (150cm), 66.9″ (170cm) |
| Material | Steel + PP |
| Brush Diameter | 14.9″ / 19.7″ |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Service workshops repairing sweepers that have hit a kerb or a buried obstacle
- Distributors stocking heads so a dealer is not waiting on air freight during the season
- Rental fleets rebuilding returned sweepers between hire periods
- Municipal depots keeping a spare head for machines on priority footpath routes
- Machine assemblers buying the sweeping head as a sub assembly for their own build
Who It Is For
- Snow equipment distributors and spare parts importers
- Authorised service workshops and repair shops
- Equipment rental and hire fleets
- Municipal and facility maintenance depots
- Machine assemblers and OEM snow sweeper builders
Problems It Solves
- A bent or worn sweeper head takes the machine off the route during the weeks it earns its keep
- Ordering a head without knowing the brush diameter usually ends in a part that will not fit the shaft
- A mixed fleet of sweeper widths forces a workshop to deal with several parts suppliers
- Replacing a whole sweeper because of one damaged assembly wipes out the margin on a service contract
- Split parts orders arrive at different times and leave the workshop waiting on the last line
Technical Features
- Complete sweeping head assembly for snow sweeper machines
- Working widths of 31.5″ (80cm), 41.7″ (106cm), 43.3″ (110cm), 49.2″ (125cm), 51.2″ (130cm), 59″ (150cm) and 66.9″ (170cm)
- Brush diameter of 14.9 inch or 19.7 inch
- Steel and PP construction
- Supplied as part of a full snow sweeper accessory programme
Materials
- Steel
- PP
Quality Control
- Incoming inspection on steel and PP before they reach the line
- In process checks during forming, welding and brush assembly
- 100% inspection of finished parts before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and decal set
- Working width and brush diameter selected from the sizes offered to match the machine
- Retail packaging or bulk carton packing to suit the parts channel
How It Compares
Against Replacing the complete snow sweeper
A new sweeper costs a season's parts budget for one damaged assembly. A replacement head puts the same machine back on the route at part cost.
Against Replacing only the brush
If the frame is bent the brush alone will not restore even contact. The complete head resets frame and brush together.
Against Snowblower head
A blower head takes snow in and throws it clear, which suits depth. The sweeper head brushes snow aside, which suits thinner cover over footpaths and paved areas.
Use Guide
- Measure the original working width and brush diameter before ordering so the replacement head matches the machine
- Stop the engine and disconnect the spark plug lead before removing the damaged head
- Inspect the drive and mounting points while the head is off, since the same impact often damages both
- Set the head so the brush contacts the surface evenly across the full width before the first run
- Store the machine with the brush off the ground and the steel frame dry at the end of the season
Snow sweeper head Buyer Questions
What widths of snow sweeper head are available?
Seven: 31.5 inch (80cm), 41.7 inch (106cm), 43.3 inch (110cm), 49.2 inch (125cm), 51.2 inch (130cm), 59 inch (150cm) and 66.9 inch (170cm).
What brush diameter do I order?
The head is offered with a brush diameter of 14.9 inch or 19.7 inch. Match it to the brush currently fitted to the machine.
What is the minimum order quantity?
One 20ft container. Sample orders are also accepted, and a single piece sample order is acceptable if you want to check fitment first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Can you supply the other snow sweeper parts at the same time?
Yes. We offer all accessories for snow sweepers, so heads and other wear parts ship in one consignment.
Can the head be produced under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour and packaging artwork.
What spare parts support do you provide after delivery?
Within the warranty period replacement parts for quality problems are free of charge. Outside the warranty period spare parts are sold at cost price.
Other Models in Snow Blower Parts
733 Snow blower parts-battery cover
View Specifications →
733 Snow blower parts-universal joint
View Specifications →
733 Snow blower parts-transmission gear
View Specifications →
733 Snow blower parts-transmission shaft
View Specifications →
733 Snow blower parts-cylinder
View Specifications →
733 Snow blower parts-clutch
View Specifications →
Snow blower parts-stay wire
View Specifications →
Loncin engine part-air filter
View Specifications →Guides That Help You Specify This
How to Choose a Snow Thrower for a Commercial Clearing Route
Clearing width, intake height and drive type decide how long a fixed route takes. Here is how to specify a machine against the route rather than against a brochure.
Read the guide →Snow Blower Spare Parts a Pre Season Stocking List
The parts that actually stop a machine mid route are cheap, small and never in stock when they are needed. Stock them in autumn instead.
Read the guide →Request a Quotation for the Snow sweeper head
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.