SB5002 Roof Snow Shovel with Aluminum Tube and 63x15cm PC Blade
The SB5002 is a long handled roof snow shovel for distributors, retailers and property maintenance buyers in regions where settled roof snow becomes a structural and water ingress problem. It is designed so the operator stands on the ground and pulls snow down the roof slope rather than climbing onto an icy surface. The handle is soft TPR, the tube is aluminum and the blade is polycarbonate at 63 by 15cm, wide enough to shift volume without becoming too heavy to hold overhead. It is a straightforward seasonal item with no moving parts and no service requirement.
- Operator stays on the ground, which removes the ladder step that causes most winter roof injuries
- Aluminum tube keeps the working weight low so a full roof can be cleared in one session
- 63 by 15cm polycarbonate blade moves a useful width of snow per pull
- Polycarbonate blade will not gouge shingles, membrane or metal panels
- Soft TPR handle stays grippable in gloves and wet conditions
- No engine and no spare parts, so a retailer can stock it without any service support
Product Gallery
Specifications
| Model No | SB5002 |
|---|---|
| Handle | Soft TPR |
| Tube | Aluminum |
| Blade | PC 63*15cm |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Homeowners reducing roof snow load before a thaw and refreeze forms ice dams
- Property managers clearing porch roofs, canopies and carports across a portfolio
- Facility staff clearing low outbuilding and warehouse roofs after heavy falls
- Owners clearing flat covers on caravans, boats and trailers
- Retail chains stocking a winter tool aisle in snow belt regions
Who It Is For
- Importers and distributors stocking manual snow tools for the winter season
- Hardware and DIY retail chains
- Property and facility management companies
- Building and roofing maintenance suppliers
- Private label and promotional buyers
Problems It Solves
- Roof clearing normally means a ladder on frozen ground, which is the highest risk task in seasonal property maintenance
- Snow that sits and refreezes forms ice dams that push water back under the roof covering
- Metal roof tools scratch shingles and dent panels and gutters, creating repair costs worse than the snow
- Heavy tools cannot be held above head height long enough to finish the job
- Hard grips become slippery and painfully cold in winter use
Technical Features
- Aluminum tube for a long reach at low weight
- Soft TPR handle grip
- Polycarbonate blade measuring 63 by 15cm
- Flat wide blade profile for pulling snow down the roof slope
- Long handle format for use from ground level
Materials
- Soft TPR handle grip
- Aluminum tube
- Polycarbonate blade
Quality Control
- Incoming inspection on aluminum tube and polycarbonate blade stock
- In process checks on tube assembly and blade fixing
- 100% finished product inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and label set
- Packaging artwork in the destination market language
- Retail colour box or bulk carton packing to suit the sales channel
How It Compares
Against Ladder and hand shovel
Climbing onto a snow covered roof is the main source of serious winter maintenance injuries. This tool does the same job with the operator on the ground.
Against Steel bladed roof tool
Steel gouges roof coverings and adds weight at the far end of a long handle. The polycarbonate blade is lighter to hold overhead and does not mark the surface.
Against Extended ordinary snow shovel
A shovel blade is shaped to scoop and lift. The 63 by 15cm flat blade is shaped to slide under settled snow and pull it off the slope.
Use Guide
- Position yourself out of the fall line before starting each pull
- Work upwards in strips from the roof edge instead of reaching for the ridge first
- Leave a thin snow layer rather than scraping down to the roof covering
- Check for overhead power lines and keep the aluminum tube well clear of them
- Dry the tube and blade and store under cover at the end of the season
Snow shovel for roof Buyer Questions
What is the minimum order quantity?
One 20ft container. A single piece sample order is also accepted if you want to check the product first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
What materials are used?
A soft TPR handle, an aluminum tube and a polycarbonate blade measuring 63 by 15cm.
Can the shovel be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme and packaging artwork.
How is the product packed for container loading?
Either retail colour box or bulk carton, to suit your sales channel. Tell us the format you need and we will confirm loading quantities for your order.
What payment terms do you accept?
Western Union, PayPal or T/T, depending on the order quantity.
Which port do you ship from?
Ningbo or Shanghai, whichever gives the better sailing for your destination.
Other Models in Snow and Ice Shovels
Multi-function snow shovel sets
View Specifications →
Ice scraper snow brush snow shovel 3-in-1
View Specifications →
Wheels snow shovel
View Specifications →Handle snow roof rake
View Specifications →Roof snow shovel
View Specifications →
Cleaning tool for car
View Specifications →
Car snow shovel
View Specifications →
Cleaning snow shovel
View Specifications →Guides That Help You Specify This
Specifying Snow Shovels for a Seasonal Retail Programme
Materials, handle formats and packing decide whether a snow tool range sells through or comes back. A buyer's checklist.
Read the guide →How to Buy Garden Machinery Direct From a Chinese Factory
What to ask, what to verify and where first orders usually go wrong, written from the factory side of the conversation.
Read the guide →Request a Quotation for the Snow shovel for roof
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.