SB4008-B Telescopic Car Snow Brush and Ice Scraper 67 to 107cm
The SB4008-B is a telescopic car snow brush and ice scraper aimed at distributors and retailers supplying drivers who need a wide brush without carrying a full length tool in the vehicle. It extends from 26.4 inches to 42 inches, 67 to 107cm, so it stows short and reaches across a roof when needed. The brush head is 9.6 inches, 24.5cm wide, and the ice scraper is 3.3 inches, 8.5cm. Construction is PP and aluminum, with handle sections of Dia24×440mm and Dia21×460mm.
- 24.5cm brush width clears a roof and bonnet in noticeably fewer strokes than a standard narrow brush
- Extends to 107cm for reach and collapses to 67cm so it still fits in a door pocket or boot
- Brush and scraper on one handle, so nothing is missing from the vehicle on a frozen morning
- Aluminum handle sections take scraping leverage without the joint failure common to all plastic tools
- PP brush filaments sweep snow off paint without the grit trap of a coarse bristle
- Short stowed length keeps the packed cube low, which matters on a full container of a low value item
Product Gallery
Specifications
| Model No | SB4008-B |
|---|---|
| Telescopic Length | 26.4″-42″ (67-107cm) |
| Size of Ice Scraper | W3.3″ (8.5cm) |
| Size of Brush | W9.6″ (24.5cm) |
| Handle | Dia24×440mm & Dia21×460mm |
| Material | PP + Aluminum |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Drivers clearing a car, estate or SUV before the morning commute
- Fleet and van operators issuing one tool per vehicle for the winter season
- Dealers and workshops clearing vehicles standing on an open forecourt
- Taxi and rideshare drivers clearing between fares in cold weather
- Retail and forecourt chains stocking a winter impulse range
Who It Is For
- Importers and distributors stocking car winter accessories
- Automotive retail and forecourt chains
- Fleet operators buying per vehicle in volume
- Supermarket and discount chains running a seasonal winter aisle
- Private label and promotional gift buyers
Problems It Solves
- Narrow brushes turn clearing a roof into a long job, so drivers skip it and the snow slides onto the windscreen at the first stop
- Fixed long handled brushes do not stow in a car and get left behind
- Short tools force the driver to lean across cold paintwork and drag clothing over it
- Metal edged scrapers scratch glass and leave a permanent line in the driver's eyeline
- Plastic telescopic joints seize or snap in hard frost
Technical Features
- Telescopic length from 26.4 inches to 42 inches, 67 to 107cm
- Brush head 9.6 inches, 24.5cm wide
- Ice scraper 3.3 inches, 8.5cm wide
- Handle sections of Dia24×440mm and Dia21×460mm
- PP and aluminum construction
Materials
- PP brush head and scraper body
- Aluminum handle sections
Quality Control
- Incoming inspection on aluminum tube and PP mouldings
- In process checks on telescopic joint fit, brush setting and scraper fitting
- 100% finished product inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and label set, including logo printing for promotional programmes
- Packaging artwork in the destination market language
- Retail colour box, hang card or bulk carton packing to suit the sales channel
How It Compares
Against Standard width car snow brush
At 24.5cm the brush head is wide enough to clear a roof in a few sweeps, which is the difference between a driver clearing the whole car and clearing only the glass.
Against Fixed length brush
A fixed brush is either too long to stow or too short to reach. This one collapses to 67cm and extends to 107cm.
Against All plastic telescopic brush
Plastic telescopic sections flex under scraping load and seize when wet and frozen. The aluminum sections handle the same use.
Use Guide
- Extend the handle and confirm the joint is locked before sweeping across a roof
- Clear the roof and bonnet before the glass so snow does not slide back onto cleared areas
- Use the brush on loose snow and the scraper only on bonded frost and ice
- Keep grit out of the brush face, since grit dragged across paint is what leaves marks
- Collapse, shake dry and keep the tool in the vehicle rather than in the garage
Cleaning snow shovel Buyer Questions
What is the minimum order quantity?
One 20ft container. A single piece sample order is also accepted if you want to check the product first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
How far does it extend?
From 26.4 inches to 42 inches, 67 to 107cm. The brush is 24.5cm wide and the ice scraper 8.5cm.
What is it made from?
PP and aluminum, with handle sections of Dia24×440mm and Dia21×460mm.
Can it be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme, logo printing and packaging artwork.
What payment terms do you accept?
Western Union, PayPal or T/T, depending on the order quantity.
Which port do you ship from?
Ningbo or Shanghai, whichever gives the better sailing for your destination.
Other Models in Snow and Ice Shovels
Multi-function snow shovel sets
View Specifications →
Ice scraper snow brush snow shovel 3-in-1
View Specifications →
Wheels snow shovel
View Specifications →
Handle snow roof rake
View Specifications →
Snow shovel for roof
View Specifications →
Roof snow shovel
View Specifications →
Cleaning tool for car
View Specifications →
Car snow shovel
View Specifications →Guides That Help You Specify This
Specifying Snow Shovels for a Seasonal Retail Programme
Materials, handle formats and packing decide whether a snow tool range sells through or comes back. A buyer's checklist.
Read the guide →How to Buy Garden Machinery Direct From a Chinese Factory
What to ask, what to verify and where first orders usually go wrong, written from the factory side of the conversation.
Read the guide →Request a Quotation for the Cleaning snow shovel
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.