SB2002-H 3-in-1 Ice Scraper Snow Brush and Snow Shovel
The SB2002-H is a detachable three in one car snow tool for automotive accessory distributors, retail chains and fleet buyers who need a scraper, a brush and a shovel that travel in one boot space. The ice scraper head is ABS with sharp teeth and a sharp blade and reaches 70cm in full length; the snow brush is 24.5cm wide in PP rated cold resistant to minus 30°C with a head that swivels 360 degrees; the snow shovel is plastic at 83cm full length with an aluminium alloy edge protecting the scoop. All three share the same handle system, joined by push button spring locks, so the kit assembles and comes apart in seconds and packs down small enough to cut both packaging and freight cost. Handles are available as spray powder steel tube or aluminium tube in 0.5mm and 0.8mm wall options.
- One handle system carries three heads, so a driver keeps one tool in the boot instead of three
- Detachable design packs down small, cutting carton size and the freight cost per piece
- Push button spring locks assemble and release with cold hands and gloves on
- Brush head swivels 360 degrees so the roof, bonnet and rear screen are reached without changing grip
- PP brush material is cold resistant to minus 30°C, where unrated plastic goes brittle
- Aluminium alloy edge on the shovel head takes the abrasion that wears a plain plastic scoop away
- EVA foam grip stays usable in freezing conditions where bare tube does not
Product Gallery
Specifications
| Model No | SB2002-H |
|---|---|
| Ice Scraper Width | 8.8cm |
| Ice Scraper Material | ABS |
| Ice Scraper Full Length | 70cm |
| Snow Brush Width | 24.5cm |
| Snow Brush Material | PP, cold-resistant to -30°C |
| Snow Brush Head Rotation | 360 degrees |
| Snow Brush Full Length | 78cm |
| Snow Shovel Material | Plastic |
| Snow Shovel Full Length | 83cm |
| Steel Tube Handle | φ24×320mm×0.5mm and φ24×220mm×0.5mm, spray powder |
| Aluminium Tube Handle | φ24×320mm×0.8mm and φ24×220mm×0.8mm |
| Connection Type | Spring connection with push button spring locks |
| Handle Grip | EVA foaming hand |
| Shovel Head Protection | Aluminium alloy article protection |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Clearing frost and ice from a windscreen before a morning commute
- Brushing snow off a roof, bonnet and rear screen after overnight snowfall
- Digging a vehicle out of snow at the roadside or in a car park
- Fleet vehicles carrying one compact winter tool per cab
- Retail and forecourt seasonal winter displays through a cold snap
Who It Is For
- Importers and distributors of automotive winter accessories
- Retail chains, hypermarkets and hardware stores with a winter seasonal range
- Petrol station and convenience store buyers
- Fleet and commercial vehicle operators
- Promotional and branded merchandise buyers
Problems It Solves
- Three separate tools take up boot space a driver does not have, so two get left at home
- Assembled snow tools ship as air and blow out the packaging and freight cost per unit
- Screw joints seize with ice and cannot be worked with gloves on; spring locks push and release
- A fixed brush head forces the user to change grip and reach across the roof
- Plain plastic scoop edges wear away against tarmac and kerbs within a season
- Bare metal handles are painful to hold in freezing conditions
Technical Features
- Ice scraper 8.8cm wide in ABS with sharp teeth and a sharp blade, full length 70cm
- Snow brush 24.5cm wide in PP, cold resistant to minus 30°C, head swivels 360 degrees, full length 78cm
- Plastic snow shovel with a full length of 83cm
- Aluminium alloy article protection on the snow shovel head to increase service life
- Spring connection mode with push button spring locks for removal and assembly
- Heavy duty polypropylene scoop and handle
- Handle options of φ24×320mm and φ24×220mm steel tube at 0.5mm wall, or aluminium tube at 0.8mm wall
- EVA foaming hand grip on the handle
- Detachable design that disassembles for storage
Materials
- ABS for the ice scraper head
- PP cold resistant to minus 30°C for the snow brush
- Heavy duty polypropylene for the scoop and handle
- Spray powder steel tube or aluminium tubular shafts for the handle
- Aluminium alloy edge protection on the snow shovel head
- EVA foam for the hand grip
Quality Control
- Incoming inspection on ABS and PP resin, steel and aluminium tube before assembly
- In process checks on spring lock fit and brush head swivel action
- 100% inspection of finished tools before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Choice of spray powder steel tube at 0.5mm or aluminium tube at 0.8mm handle
- Buyer branding and colour on the heads and handle
- Packaging artwork in the destination market language to suit the sales channel
How It Compares
Against Three separate snow tools
Three tools take three lots of boot space and three SKUs. One handle here carries the 70cm scraper, the 78cm brush and the 83cm shovel.
Against Fixed assembled snow brush
An assembled tool ships largely as air. The detachable design cuts packaging and logistics cost and stores flat in the vehicle.
Against Plain plastic snow shovel head
A bare plastic edge wears against tarmac and kerbs. This head has aluminium alloy article protection to extend service life.
Use Guide
- Assemble the handle sections and lock each joint with the push button spring lock before use
- Use the ABS scraper on glass only and keep the blade flat to the surface
- Swivel the brush head to the angle that suits the panel rather than dragging it across at a fixed angle
- Use the brush, not the scraper, on paintwork to avoid marking the finish
- Fit the shovel head when digging out and keep the aluminium protected edge to the ground
- Press the spring locks to disassemble and store the parts flat in the vehicle
- Dry the brush before storage so it does not freeze into a block
Ice scraper snow brush snow shovel 3-in-1 Buyer Questions
What is the minimum order quantity?
One 20ft container. Sample orders are accepted and a single piece sample order is acceptable.
How long is the lead time?
25 to 35 days for one 40HQ container. A sample order ships in 1 to 7 days.
Can we choose a steel or aluminium handle?
Yes. The handle is available as φ24×320mm and φ24×220mm spray powder steel tube at 0.5mm wall, or as aluminium tube at 0.8mm wall. Tell us which you want quoted.
Does the tool ship assembled or in pieces?
It is a detachable design that disassembles, which saves packaging and logistics cost and makes it easy for the end user to store.
Can it be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme and packaging artwork in your market language.
Is the product CE certified?
No CE certificate is claimed for this product. Tell us the destination market and we will confirm what can be arranged before you order.
What payment terms and shipping port do you use?
Western Union, PayPal or T/T depending on order quantity, shipping from Ningbo or Shanghai.
Other Models in Snow and Ice Shovels
Multi-function snow shovel sets
View Specifications →
Wheels snow shovel
View Specifications →
Handle snow roof rake
View Specifications →
Snow shovel for roof
View Specifications →
Roof snow shovel
View Specifications →
Cleaning tool for car
View Specifications →
Car snow shovel
View Specifications →
Cleaning snow shovel
View Specifications →Guides That Help You Specify This
Specifying Snow Shovels for a Seasonal Retail Programme
Materials, handle formats and packing decide whether a snow tool range sells through or comes back. A buyer's checklist.
Read the guide →How to Buy Garden Machinery Direct From a Chinese Factory
What to ask, what to verify and where first orders usually go wrong, written from the factory side of the conversation.
Read the guide →Request a Quotation for the Ice scraper snow brush snow shovel 3-in-1
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.