SB5003 Snow Roof Rake with Aluminum 6061 Tube and 63x15cm PC Blade
The SB5003 is a long handled roof snow rake for retailers, property managers and distributors serving regions where roof snow load is a seasonal liability. It lets the user pull snow off a roof, canopy or carport while standing on the ground, which removes the need to put a person on a ladder in icy conditions. The tube is aluminum 6061, the handle is soft TPR and the blade is polycarbonate measuring 63 by 15cm. The wide thin blade slides under settled snow and pulls it clear without the weight penalty of a steel head.
- Ground level operation removes the ladder work that drives winter insurance and safety incidents
- Aluminum 6061 tube keeps the reach light enough to hold overhead through a full roof
- 63 by 15cm polycarbonate blade is wide enough to move volume and light enough not to fight the user
- Polycarbonate rather than steel at the roof surface, so shingles and panels are not gouged
- Soft TPR handle keeps grip usable with gloves in cold and wet conditions
- A clear seasonal add on sale next to shovels and scrapers with no service parts to stock
Product Gallery
Specifications
| Model No | SB5003 |
|---|---|
| Handle | Soft TPR |
| Tube | Aluminum 6061 |
| Blade | PC 63*15cm |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Homeowners pulling snow load off a roof before a thaw and refreeze cycle causes ice dams
- Property managers clearing canopies, porch roofs and carports across a portfolio
- Caravan, boat and vehicle cover owners clearing settled snow from flat covers
- Facility staff clearing low warehouse and outbuilding roofs after heavy falls
- Retail chains stocking a winter aisle in snow belt regions
Who It Is For
- Importers and distributors stocking manual snow tools for the winter season
- Hardware and DIY retail chains
- Property and facility management companies
- Roofing and building maintenance suppliers
- Private label and promotional buyers
Problems It Solves
- Clearing roof snow normally means a ladder on icy ground, which is the highest risk task in residential winter maintenance
- Settled snow that thaws and refreezes forms ice dams and backs water under the roof covering
- Steel headed roof tools scratch and dent shingles, panels and gutters
- Heavy tools cannot be held overhead long enough to finish a roof in one session
- Bare or hard plastic grips become unusable in cold and wet weather
Technical Features
- Aluminum 6061 tube
- Soft TPR handle grip
- Polycarbonate blade measuring 63 by 15cm
- Wide flat blade profile for pulling snow down the roof slope
- Long handle format intended for use from ground level
Materials
- Soft TPR handle grip
- Aluminum 6061 tube
- Polycarbonate blade
Quality Control
- Incoming inspection on aluminum tube and polycarbonate blade stock
- In process checks on tube assembly and blade fixing
- 100% finished product inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and label set
- Packaging artwork in the destination market language
- Retail colour box or bulk carton packing to suit the sales channel
How It Compares
Against Ladder and hand shovel
Working from a ladder on frozen ground is the main injury risk in residential snow clearing. This tool keeps the operator on the ground for the same job.
Against Steel bladed roof scraper
A steel blade gouges shingles and panels and is heavy to hold overhead. The polycarbonate blade is lighter and does not mark the roof surface.
Against Standard snow shovel with extension
A shovel blade is shaped to lift, not to pull down a slope. The 63 by 15cm flat blade is made to slide under settled snow and bring it off the roof.
Use Guide
- Stand clear of the fall line before pulling, since snow comes down fast once it releases
- Work from the roof edge upwards in strips rather than trying to reach the ridge first
- Leave a thin layer of snow on the surface rather than scraping to the roof covering
- Keep clear of overhead power lines and never use the rake near them
- Rinse, dry and store the tube and blade under cover at the end of the season
Handle snow roof rake Buyer Questions
What is the minimum order quantity?
One 20ft container. A single piece sample order is also accepted if you want to check the product first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
What materials are used?
A soft TPR handle, an aluminum 6061 tube and a polycarbonate blade measuring 63 by 15cm.
Can the rake be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme and packaging artwork.
How is the product packed for container loading?
Either retail colour box or bulk carton, to suit your sales channel. Tell us the format you need and we will confirm loading quantities for your order.
What payment terms do you accept?
Western Union, PayPal or T/T, depending on the order quantity.
Which port do you ship from?
Ningbo or Shanghai, whichever gives the better sailing for your destination.
Other Models in Snow and Ice Shovels
Multi-function snow shovel sets
View Specifications →
Ice scraper snow brush snow shovel 3-in-1
View Specifications →
Wheels snow shovel
View Specifications →Snow shovel for roof
View Specifications →Roof snow shovel
View Specifications →
Cleaning tool for car
View Specifications →
Car snow shovel
View Specifications →
Cleaning snow shovel
View Specifications →Guides That Help You Specify This
Specifying Snow Shovels for a Seasonal Retail Programme
Materials, handle formats and packing decide whether a snow tool range sells through or comes back. A buyer's checklist.
Read the guide →How to Buy Garden Machinery Direct From a Chinese Factory
What to ask, what to verify and where first orders usually go wrong, written from the factory side of the conversation.
Read the guide →Request a Quotation for the Handle snow roof rake
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.