Snow Blower Tyres in 13 14 15 and 16 Inch Sizes
These are replacement snow blower tyres, offered in 13″, 14″, 15″ and 16″ sizes, for dealers, rental fleets and importers who keep walk behind snow equipment running through a season. Traction is what a snow thrower depends on: once the tread is worn smooth the machine slips on packed snow and ice, the operator fights it instead of driving it, and the clearing rate on a fixed route drops. Tyres are also the part most often damaged by kerbs, grit and cold storage, so they turn over faster than almost anything else on the machine. Covering four sizes from one supplier lets a workshop restock a mixed fleet in a single order rather than chasing each size separately.
- Four sizes, 13″, 14″, 15″ and 16″, so a mixed fleet is restocked from one supplier and one shipment
- Fresh tread restores traction on packed snow, which is what sets the clearing rate on a fixed route
- Replacing a worn tyre is far cheaper than the wheel and axle damage that comes from a machine slipping under load
- Ordered alongside tyre pins and drive parts so a wheel service kit arrives complete
- OEM and ODM production available for dealers matching their own machine range
- Single piece sample orders accepted so size and fitment can be checked before volume
Product Gallery
Specifications
| Part Type | Snow blower tyre |
|---|---|
| Sizes Available | 13″, 14″, 15″, 16″ |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Dealer workshops refitting tyres on machines coming in for pre season service
- Rental fleets replacing tyres scuffed by kerbs and grit across a hire season
- Municipal depots restocking several machine sizes from a single parts order
- Contractors refreshing traction before a season of fixed commercial routes
- Importers adding a spares carton to a container of complete machines
Who It Is For
- Snow equipment dealers and service workshops
- Importers and distributors of snow blower spare parts
- Equipment rental and hire fleets
- Municipal and facility maintenance departments
- Contractors running fixed seasonal clearing routes
Problems It Solves
- Worn tread lets the machine slip on packed snow and ice, so the operator cannot hold a line
- Slipping wheels slow the route and blow out the labour budget on fixed price contracts
- Chasing four different wheel sizes from four suppliers multiplies freight and admin cost
- A perished tyre found at the first snowfall takes the machine out of service at the worst moment
- Machines stored through the off season deflate and perish, and a fleet needs restocking all at once
Technical Features
- Replacement snow blower tyres in 13″, 14″, 15″ and 16″ sizes
- Traction component for walk behind snow throwers on packed snow and ice
- Supplied as part of a complete snow blower accessory range
- Available to buyer specification under OEM and ODM arrangements
Quality Control
- Incoming inspection on raw material before parts reach the line
- In process checks on size and tread form during production
- 100% inspection of finished tyres before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding on the part packaging
- Mixed size orders so one shipment covers a whole fleet
- Retail box or bulk carton packing to suit the sales channel
How It Compares
Against Replacing the complete wheel assembly
If the rim and axle are sound, fitting a tyre restores traction at a fraction of the cost and takes far less space in a container.
Against Running worn tyres through one more season
Worn tread slips under load, which slows a fixed route and puts extra stress on the drive rather than into the snow.
Against Sourcing each wheel size from a different supplier
Four sizes from one manufacturer consolidates a mixed fleet restock into one order, one inspection and one shipment.
Use Guide
- Measure the existing wheel and confirm it against the 13″, 14″, 15″ or 16″ size before ordering
- Stop the engine and disconnect the spark plug lead before lifting the machine to work on a wheel
- Inspect the tyre pin and axle bore while the wheel is off and replace a bent pin rather than reusing it
- Set both wheels to the same pressure so the machine tracks straight under load
- Check tyre condition at the end of the season before the machine goes into storage
Snow blower parts-tyre Buyer Questions
What sizes are available?
13″, 14″, 15″ and 16″.
What is the minimum order quantity?
One 20ft container is the standard MOQ, but a single piece sample order is accepted so you can confirm fitment first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Can I mix sizes in one order?
Yes. Mixed size orders are accepted, which suits a workshop restocking several machine types at once.
Can the tyres be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding and packaging artwork.
What payment methods do you accept?
Western Union, PayPal or T/T, depending on the order quantity.
Which port do you ship from?
Ningbo or Shanghai, whichever gives the better sailing for your destination.
Other Models in Snow Blower Parts
733 Snow blower parts-battery cover
View Specifications →
733 Snow blower parts-universal joint
View Specifications →
733 Snow blower parts-transmission gear
View Specifications →
733 Snow blower parts-transmission shaft
View Specifications →
733 Snow blower parts-cylinder
View Specifications →
733 Snow blower parts-clutch
View Specifications →
Snow blower parts-stay wire
View Specifications →
Loncin engine part-air filter
View Specifications →Guides That Help You Specify This
How to Choose a Snow Thrower for a Commercial Clearing Route
Clearing width, intake height and drive type decide how long a fixed route takes. Here is how to specify a machine against the route rather than against a brochure.
Read the guide →Snow Blower Spare Parts a Pre Season Stocking List
The parts that actually stop a machine mid route are cheap, small and never in stock when they are needed. Stock them in autumn instead.
Read the guide →Request a Quotation for the Snow blower parts-tyre
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.