Snow Blower Control Cables and Cable Pulley
These are the control cables and the cable pulley that carry the operator's auger and drive commands from the handlebar levers down to the machine, and they are bought by dealers, rental fleets and importers who service walk behind snow equipment. A cable is the link between the operator and the clutch, so when it stretches, frays or seizes the auger will not engage cleanly, the drive slips, and the machine becomes unsafe to hand to a customer. Cables fail progressively rather than suddenly, which means a fleet tends to need several at once rather than one. SONJUN supplies cables and the matching cable pulley as part of the full snow blower accessory range, so a complete control repair can be ordered in one go.
- Cable and cable pulley available from the same supplier, so a control repair is not held up waiting for the other half
- Restores clean auger and drive engagement, which is what makes a machine safe to release back to a customer
- Cables fail gradually across a fleet, so bulk stocking keeps machines on route instead of queued in the workshop
- Ordered with belts, pins and gear parts in one consolidated shipment
- OEM and ODM production available for dealers matching their own machine range
- Single piece sample orders accepted so routing and length can be checked before volume
Product Gallery
Specifications
| Part Type | Snow blower control cable |
|---|---|
| Related Part | Cable pulley |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Dealer workshops replacing stretched cables during a pre season service
- Rental fleets refitting controls on machines returned with a slipping clutch lever
- Municipal depots holding cable stock so route machines are not stood down
- Contractors replacing a seized cable after a machine has sat through a cold spell
- Importers building a pre season spares stock alongside a container of machines
Who It Is For
- Snow equipment dealers and service workshops
- Importers and distributors of snow blower spare parts
- Equipment rental and hire fleets
- Municipal and facility maintenance departments
- Independent small engine repair businesses
Problems It Solves
- A stretched cable will not fully engage the auger, so the machine runs but clears badly
- A frayed or seized cable can leave the auger engaged after the lever is released, which is a safety problem on a hire machine
- Replacing a cable without the matching pulley leaves the same worn routing and the fault returns
- Cable faults build up across a fleet at the same time, and one at a time ordering cannot keep up
- Long parts lead times keep machines off route during the few weeks that actually earn money
Technical Features
- Control cables for auger and drive engagement on walk behind snow blowers
- Matching cable pulley supplied within the same parts range
- Part of a complete snow blower accessory range
- Available to buyer specification under OEM and ODM arrangements
Quality Control
- Incoming inspection on cable and fittings before assembly
- In process checks on cable length, end fittings and free movement
- 100% inspection of finished cables before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding on the part packaging
- Cable and pulley supplied together as a control repair set or as separate lines
- Retail box or bulk carton packing to suit the sales channel
How It Compares
Against Adjusting a stretched cable rather than replacing it
Adjustment buys a few hours on a cable that has already stretched once, whereas a new cable restores the full lever travel the clutch was designed around.
Against Replacing the complete control assembly
If the levers and housing are sound, a cable and pulley restore control for a fraction of the cost and ship in a fraction of the space.
Against Buying cables through the machine's original dealer chain
Buying direct lets a workshop hold bulk cable stock at manufacturer pricing, which is what keeps repairs inside the same day.
Use Guide
- Compare the length and end fittings of the old cable against the replacement before ordering
- Stop the engine and disconnect the spark plug lead before working on the controls
- Inspect the cable pulley for wear at the same time and replace it if the groove is grooved or scored
- Route the new cable clear of the muffler and hot engine parts, with no tight bends
- Check that the auger and drive fully disengage when the lever is released before returning the machine to service
Snow blower parts-cables Buyer Questions
What is the minimum order quantity?
One 20ft container is the standard MOQ, but a single piece sample order is accepted so you can confirm fitment first.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Do you supply the cable pulley as well?
Yes. The cable pulley is part of the same snow blower accessory range and can ship in the same order.
Can I order cables with other snow blower parts?
Yes. SONJUN offers the full accessory range for snow blowers, so cables, belts, pins and gear parts can be consolidated into one order.
Can parts be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding and packaging artwork.
What payment methods do you accept?
Western Union, PayPal or T/T, depending on the order quantity.
What support is there if a part has a quality problem?
Within the warranty period replacement spare parts are supplied free of charge for quality problems, and outside it spare parts are sold at cost price.
Other Models in Snow Blower Parts
733 Snow blower parts-battery cover
View Specifications →
733 Snow blower parts-universal joint
View Specifications →
733 Snow blower parts-transmission gear
View Specifications →
733 Snow blower parts-transmission shaft
View Specifications →
733 Snow blower parts-cylinder
View Specifications →
733 Snow blower parts-clutch
View Specifications →
Snow blower parts-stay wire
View Specifications →
Loncin engine part-air filter
View Specifications →Guides That Help You Specify This
How to Choose a Snow Thrower for a Commercial Clearing Route
Clearing width, intake height and drive type decide how long a fixed route takes. Here is how to specify a machine against the route rather than against a brochure.
Read the guide →Snow Blower Spare Parts a Pre Season Stocking List
The parts that actually stop a machine mid route are cheap, small and never in stock when they are needed. Stock them in autumn instead.
Read the guide →Request a Quotation for the Snow blower parts-cables
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.