PVC Trunking 60x40mm for Distribution Runs
At 60x40 mm the profile stops being final circuit containment and becomes a distribution route. It carries a substantial bundle along a corridor or a perimeter and accepts a divider where power and data have to stay apart.
What This Profile Gives You
Distribution Capacity
Takes the bundle that feeds a floor rather than a single room.
Divider Ready
Section suits compartment use where services must be separated.
Stiff Cover
Extruded rigid enough not to bow between fixings across the wider span.
Impact Resistant
Suited to corridors and service areas where the wall takes knocks.
Application Scenarios
- Perimeter distribution at desk height in open plan offices
- Corridor runs feeding several rooms from one riser
- Workshop and laboratory benches with multiple services
Who It Is For
- Office fit-out contractors
- Building services teams
- Distributors supplying the project trade
What Goes Wrong Without It
- Several small profiles running in parallel because none of them was large enough
- Wide covers that bow and leave a visible gap along the run
- Power and data sharing a channel where the specification forbids it
Technical Features
- Section 60x40 mm
- New PVC compound, self extinguishing, non conductive
- Smooth channel with low friction
- Resistant to compression and impact
- Specification references IEC 61084-2-1
Customisation
Divider configuration, colour, print and packing to your specification; custom sections by mould design.
Specifications
| Section | 60x40 mm |
|---|---|
| Material | New PVC compound |
| Standard Referenced | IEC 61084-2-1 |
| Application | Internal wiring, protecting wire under 1200 V |
| Fire Behaviour | Self extinguishing |
| Divider | Available, confirm per order |
| Wall Thickness | TBC per order |
Values marked TBC are confirmed per order against your drawing or sample. We do not publish numbers we cannot stand behind.
Quality Control
- First Inspection on the opening batch of every mould and colour run
- IPQC in-process checks on wall thickness, profile shape and colour while the line runs
- Final Inspection on packed goods before the container is loaded
Certification: RoHS, TUV and SGS; certificate copies are sent on request.
Comparison
Against 25x16 mm this profile is a distribution route rather than a final circuit. Against 100x50 mm compartment trunking it is cheaper and less obtrusive, but it fills sooner on a busy floor.
Use Guide
- Fix at closer centres than a small profile; a loaded 60x40 run is heavy
- Screw fix rather than relying on adhesive at this size
- Fit the divider before laying cable so services stay on their own side
- Use matching angles at corners; a mitre on a wide cover rarely closes neatly
Often Ordered Together
PVC Cable Trunking Raceway 60x40mm
A 60x40 mm raceway supplied as the wire trunking line for installers who buy channel and cover by the bundle.
View product →
PVC Compartment Trunking 100x50mm
The largest trunking section we run: 100x50 mm with an internal divider so power and data travel the same route in separate compartments.
View product →
PVC Trunking 25x16mm
The standard square profile in 25x16 mm: a base with two retaining lips and a cover that clips between them.
View product →Where It Is Used
Questions About the PVC Trunking 60x40mm
Can this size be supplied with a divider?
Yes, the compartment configuration is available; confirm it in your order.
Will adhesive tape hold it?
Not once it is loaded. Use mechanical fixings for this section.
Are matching fittings available?
Yes, angles, tees and end caps from the accessories range.
How does it load into a container?
Large sections are nested with conduit and fittings so the container ships product rather than air.
What is the lead time?
Generally 7 to 15 days after the advance payment, with 5 to 10 days to load one high cube.
Quote the PVC Trunking 60x40mm
Tell us the quantity, colour and packing you need. We reply with a price, a lead time and the container plan.