Home/Products/High Flow Filter Cartridges/Max-T Series High Flow Filter Cartridges
Max-T Series High Flow Filter Cartridges
6.75 inch large diameter high flow filter cartridges in 60 inch length, 1 to 20 micron, 180 ℉, 35 PSID. Dimensional equivalent to Pentair Aqualine ser
What The Max-T Series High Flow Does In Your Line
Max-T is a 6.75 inch large diameter high flow cartridge with a melt blown polypropylene media pack, an inner core, and an injection moulded outer cage. It runs outside-in, so dirt is captured on the outside of the media pack and remains there during change-out. The 60 inch length maximizes service life and reduces the number of change-outs. It is dimensionally equivalent to the Pentair Aqualine series and drops into those housings without adapters.
Category: High Flow Filter Cartridges · Industries: Water Treatment And RO Systems Oil And Gas Operations Food And Beverage Plants
Why Buyers Pick This Element
- 6.75 inch diameter and 60 inch length reduce the number of cartridges needed per skid
- Outside-in flow path keeps captured solids on the cartridge during change-out
- Melt blown polypropylene media provides consistent pore size and high dirt holding capacity
- 23 times more media surface area than standard 10 inch pleated cartridges
- Wide chemical compatibility with polypropylene media and O-rings
- Dimensional equivalent to the installed Pentair Aqualine series so no housing or piping change is needed
Buyers Who Specify This Cartridge
- Water treatment plant engineers replacing OEM high flow cartridges on an existing skid
- RO system integrators specifying prefiltration for new desalination or process water trains
- Beverage and food plant maintenance teams standardising on one cartridge across lines
- Filtration distributors who need an equivalent series to quote against OEM part numbers
What It Fixes On The Line
- OEM high flow cartridges carry long lead times and high unit cost per replacement cycle
- Filter housings are full and there is no floor space to add another vessel for more flow
- Pleat packs collapse under differential pressure and shed captured solids back into the line
- Solids fall off the element during change-out and contaminate downstream filtrate
- Frequent change-outs due to short service life increase maintenance labour and downtime
Construction Detail
- Large diameter 6.75 inch body with 60 inch length maximises effective filtration area
- Melt blown polypropylene media with absolute pore sizes of 1, 5, 10, and 20 micron
- Single piece full length media pack with no joints along the cartridge
- Inner core and injection moulded outer cage for differential pressure strength
- Outside-in flow path for contaminant retention during change-out
- Positive O-ring seal with wide chemical compatibility across polypropylene materials
Materials Of Construction
- Melt blown polypropylene filtration media, thermally bonded without adhesives or surfactants
- Polypropylene inner core and injection moulded outer cage
- EPDM O-rings for general water and hot water service
- Viton O-rings for aggressive chemical and higher temperature duty
- Buna O-rings for hydrocarbon and general industrial water
- Silicone O-rings where a low extractable elastomer is preferred
Max-T Series High Flow Filter Cartridges Specifications
Every figure below comes from the manufacturer data for this series. Anything not listed here is not published and we will confirm it against your duty before you order.
| Series | Max-T |
|---|---|
| Lengths | 60 inch |
| Micron Ratings | 1, 5, 10, 20 micron |
| Media | Melt blown polypropylene |
| Core and Cage | Polypropylene |
| O-ring Options | EPDM, Viton, Buna, Silicone |
| Adapter Options | Round double O-ring, Claw single O-ring |
| Max Temperature | 180 ℉ (82.2 ℃) |
| Max Differential Pressure | 35 PSID |
| Flow Pattern | Outside-in |
| Order Code Example | Max-T-1-60-E-R |
Where It Is Installed
RO pretreatment ahead of membrane racks in a desalination or demineralisation train
Process water filtration in the food and beverage industry where particulate must be removed at high flow
Chemical transfer lines requiring high flow and broad chemical resistance
Salt water intake filtration ahead of cartridge or membrane stages
Industrial water treatment where high flow and long service life are critical
How This Cartridge Is Built
Media Preparation
Media extrusion and melt blowing to form a uniform pore structure
Pack Forming
Vertical pleat pack forming to full cartridge length in one piece
Hardware Assembly
Core insertion and injection moulded cage assembly
End Cap Bonding
Thermal end cap bonding without adhesive
Configuration
O-ring and adapter fitting to the ordered configuration
Inspection And Packing
Flush, drain and individual packing
Checks Before It Ships
- Dimensional check of outer diameter, length and adapter against the ordered code
- Media pack inspection for collapse, gaps and end cap bond integrity
- Differential pressure check against the 35 PSID at 82.2 ℃ rating
- O-ring compound and seating verification before packing
What We Can Change For You
- Length fixed at 60 inch to match the installed housing
- Micron rating selected from 1, 5, 10, or 20 micron for the duty
- O-ring compound chosen from EPDM, Viton, Buna or Silicone
- Round double O-ring or claw single O-ring adapter to match the existing seat
- Private label printing and carton marking for distributors
How It Compares With The Alternatives
| Standard 10 inch pleated cartridges | Max-T uses a larger diameter and longer length to reduce element count and change-out frequency, but the initial cartridge cost per piece is higher |
|---|---|
| Pentair Aqualine series | Max-T is dimensionally equivalent and drops into the same housings without adapters, but with a lower landed cost and shorter lead time |
| Bag filters | Max-T holds a tighter absolute rating and does not bypass at the seal, but a bag is cheaper for coarse duty |
| Other high flow cartridges | Max-T has 23 times more media surface area than standard 10 inch pleated cartridges, which extends service life and reduces change-out frequency |
Installing And Running This Cartridge
- Confirm housing bore, seat type and cartridge length before ordering; the adapter code must match
- Start clean differential pressure logging from day one so change-out is data driven
- Change out at 35 PSID differential rather than waiting for the maximum pressure
- Do not exceed 82.2 ℃; select Viton O-rings if the duty runs warm or carries solvents
- Flush the housing before fitting a new element so settled solids do not load it immediately
- Lift the element vertically and keep it upright so captured solids stay on the media pack
Max-T Series High Flow Filter Cartridges FAQ
Will Max-T fit my existing Pentair Aqualine housings?
What micron ratings can I get?
What is the maximum operating temperature and pressure?
Which O-ring should I choose?
How do I write the order code?
Can I get a sample before placing a production order?
Other Elements Buyers Compare With This One
HFMV Series High Flow Filter Cartridges
HFMV is a 6.5 inch large diameter high flow cartridge with a vertically pleated polypropylene pack, an inner core and an injection moulded outer cage.
View Specifications
Ultro Series High Flow Filter Cartridges
Ultro Series is a 6 inch large diameter high flow cartridge with a radial pleated polypropylene pack, an inner core, and a support layer.
View Specifications
HFBH Bag Style High Flow Filter Cartridges
HFBH is a 6 inch diameter high flow pleated bag style cartridge with a polypropylene media pack, an inner core, and an injection moulded outer cage.
View Specifications
Pleated Bag High Flow Filter Cartridges
HFBH is a 6 inch diameter high flow pleated bag cartridge with a polypropylene and glass fiber media pack, an inner core, and a rigid polypropylene ou
View SpecificationsReading That Helps You Specify
High Flow Cartridges Compared With Standard 2.5 Inch Cartridges
Compare element count, footprint, change-out labour, and cost per cycle between 6 inch and 6.5 inch high flow cartridges and traditional 2.5 inch cartridges.
Read GuideMatching Replacement Cartridges To Your Filter Housing
Find the right replacement cartridge by matching outer diameter, length, adapter, O-ring, and flow direction. We confirm fit based on your housing model and cur
Read GuideHow To Choose A Micron Rating For Cartridge Filters
Absolute versus nominal ratings, choosing from the stage you protect, and why rating drives change-out cost more than unit price.
Read GuideSend Us Your Housing Model And Duty
Send the housing model and the code on the element you use today and we will confirm whether Max-T Series High Flow Filter Cartridges is the right match before you order.