Platform Glue of 3D Sign Printer
Holds large flat letter shapes down through hours of printing
View product
3D Printer Accessory
Brass Nozzle for 3D Sign Printer
Model BOQUILLA
A 0.8 MM brass nozzle for FDM sign printers. The wide aperture is chosen for signage work rather than fine modelling because a bigger opening moves more material per pass and is far less likely to jam on a print that runs for hours. Brass nozzles are the general purpose option and steel nozzles are the more durable choice for continuous production.
- 0.8 MM aperture lets a letter print finish faster than a fine modelling nozzle
- Wide bore reduces jamming on long unattended overnight prints
- Brass transfers heat quickly which keeps extrusion stable at 230 to 250 degrees
- Standard spare part so a blocked nozzle is a five minute fix not a lost day
Product Overview
A 0.8 MM brass nozzle for FDM sign printers. The wide aperture is chosen for signage work rather than fine modelling because a bigger opening moves more material per pass and is far less likely to jam on a print that runs for hours. Brass nozzles are the general purpose option and steel nozzles are the more durable choice for continuous production.
Who It Is For
- Workshops running sign printers in continuous production
- Maintenance staff holding consumable spares
- Distributors supplying aftermarket parts to sign makers
Problems It Solves
- A jammed nozzle halts a letter print and wastes the material already laid down
- Fine aperture nozzles are slow and block easily on signage grade filament
- Waiting for a spare from overseas stops a production line
Key Benefits
- 0.8 MM aperture lets a letter print finish faster than a fine modelling nozzle
- Wide bore reduces jamming on long unattended overnight prints
- Brass transfers heat quickly which keeps extrusion stable at 230 to 250 degrees
- Standard spare part so a blocked nozzle is a five minute fix not a lost day
- Also fits 3D model printers so one spare covers both machine types in a workshop
Technical Features
- Aperture 0.8 MM
- Brass construction
- For FDM printing mode
- Suits 3D sign printers and 3D model printers
Application Scenarios
- Replacing a worn or blocked nozzle mid production
- Keeping a spare set beside each printing cell
- Printing thick letter returns where throughput matters more than fine detail
- General FDM model printing alongside signage work
Customisation Options
- Aperture selection between the 0.6 MM and 0.8 MM options
Product Gallery
Specifications
| Product Model | BOQUILLA |
|---|---|
| Brand Name | IROGA 3D |
| Color | Golden |
| Material | Brass |
| Aperture | 0.8 MM |
| Application | 3D Sign Printers / 3D Model Printers |
Materials
- Brass
Manufacturing and Quality Control
Process
Produced to the specification above.
Quality Control
- Aperture and thread checked before packing
Comparison With Other Options
Compared with Black steel nozzle
Steel nozzles are more durable and are the ones installed and supplied as spares with IROGA 3D sign printers. Brass heats faster and is the general purpose option.
Compared with 0.4 MM modelling nozzle
A fine nozzle gives detail a sign does not need, prints much slower and blocks more often on signage filament.
Use Guide
- Heat the hotend before loosening a nozzle so residual filament releases
- Fit the nozzle at temperature and re-level the bed afterwards
- Purge until the extrusion runs clean and even before starting a job
- Keep a spare set at the machine so a blockage does not stop the shift
Questions
Frequently Asked Questions
Answers to what buyers ask before ordering Brass Nozzle for 3D Sign Printer.
What aperture is this nozzle
0.8 MM, which is one of the two sizes used on sign printers together with 0.6 MM.
Why use a bigger aperture for signage
A bigger diameter makes printing faster and avoids jamming, which matters on long letter prints.
Is brass or steel better
Steel nozzles are more durable and are the ones fitted to IROGA 3D signage printers. Brass is the general purpose FDM option.
Are nozzles supplied with the machine
Yes. Five black steel nozzles are included in the free accessories with each 3D sign printer.
Will it fit a 3D model printer
Yes, it is used on 3D sign printers and 3D model printers in FDM mode.
What is the minimum order
Contact us with the machine model you run and we will quote the spare parts package that fits it.
Related Products
Often Ordered Together
Dongle for Slicing Software of 3D Sign Printer
Keeps the slicing licence with the workshop rather than tied to one computer
View product
800mm Industrial 3D Printer for Letter Maker from Best Manufacturer in China
800 x 800 mm covers the letter sizes most storefront jobs actually need
View productRequest A Quote for This Product
Send the quantity and your destination port and we will quote EXW FOB CIF or DDP.